APT2012RWF KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

2.0mmx1.25mm SMT LED,0.75mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE:6500K COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). OPTICAL EFFICIENCY:8.1 lm/W(TYP.) COLOR REPRODUCTION INDEX:80 RoHS COMPLIANT. PRELIMINARY SPEC

Description

The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.

Applications

traffic signaling. backlighting (illuminated advertising , general lighting). interior and exterior automotive lighting. substitution of micro incandescent lamps. Reading camps. signal and symbol luminaire for orientation. marker lights (e.g. steps, exit ways, etc). decorative and entertainment lighting. indoor and outdoor commercial and residential architectural lighting. 2.0x1.25mm SMD CHIP LED LAMP Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAG3804 REV NO: V.6 DATE: MAY/17/2007 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203005372 Selection Guide Parameter Symbol Value Unit Power dissipation Pt 120 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C DC Forward Current IF 30 mA Peak Forward Current Note4 IFM 100 mA Thermal resistance Junction/ambient Note5 Junction/solder point Rth JA Rth JS 350 130 °C/W °C/W Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Note1 0.31 - Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 0.31 - Forward Voltage IF=20mA [Min.] VF Note2 2.7 VForward Voltage IF=20mA [Typ.] 3.2 Forward Voltage IF=20mA [Max.] 4.0 Reverse Current (VR=5V) [Typ.] IR 0.01 µ A Reverse Current (VR=5V) [Max.] 10 Temperature coefficient of x IF=20mA, -10 ° C T100 ° C [Typ.] TC x -0.1 10-3 /° C Temperature coefficient of y IF=20mA, -10 ° C T100 ° C [Typ.] TCy -0.2 10-3 /° C Temperature coefficient of VF IF=20mA, -10 ° C T100 ° C [Typ.] TCV -2.5 mV/° C Part No. Dice Lens Type luminous Intensity Note2 Iv(mcd) @ 20 mA >v (mlm) Note3 @ 20 mA Viewing Angle Note1 Min. Typ. Typ. 2 1/2 APT2012RWF/A WHITE (InGaN) YELLOW FLUORESCENT 70 140 520 120 ° Notes: 1 . 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size 16 mm 2 per pad), Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V.

SPEC NO: DSAG3804 REV NO: V.6 DATE: MAY/17/2007 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203005372 White APT2012RWF/A Brightness codes Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. luminous Intensity Note1 Iv(mcd) @ 20 mA >v (mlm) Note2 @ 20 mA Code. Min. Max. Typ. M 70 130 300 N 110 220 480 P 180 320 710 Q 280 420 960

SPEC NO: DSAG3804 REV NO: V.6 DATE: MAY/17/2007 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203005372 APT2012RWF/A

SPEC NO: DSAG3804 REV NO: V.6 DATE: MAY/17/2007 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203005372 APT2012RWF/A 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 b3 b1 b4 c0 a0 a1 Reference CCT: 14000~9000k Reference CCT: 14000~9000k b1 b2 Reference CCT: 9000~5600k Reference CCT: 9000~5600k b3 b4 Reference CCT: 9000~7000k Reference CCT: 7600~5600k c0 c1 Reference CCT: 5600~4600k Reference CCT: 6000~4600k White CIE

SPEC NO: DSAG3804 REV NO: V.6 DATE: MAY/17/2007 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203005372 APT2012RWF/A Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension

SPEC NO: DSAG3804 REV NO: V.6 DATE: MAY/17/2007 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203005372 PACKING & LABEL SPECIFICATIONS APT2012RWF/A