APT10050B2LC ADPOW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

ADVANCED TECHNICALINFORMATION MAXIMUM RATINGS All Ratings: TC = 25°C unless otherwise specified. UNIT Volts Amps Volts Watts W/°C Amps mJ UNIT Volts Amps Ohms µA nA Volts MIN TYP MAX 1000 0.500 250 ±100 APT10050 1000 ±30 ±40 520 4.16 -55 to 150 300 2500 Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250µA) On State Drain Current 2 (VDS > ID(on) x RDS(on) Max, VGS = 10V) Drain-Source On-State Resistance 2 (VGS = 10V, 0.5 ID[Cont.]) Zero Gate Voltage Drain Current (VDS = VDSS , VGS = 0V) Zero Gate Voltage Drain Current (VDS = 0.8 VDSS , VGS = 0V, TC = 125°C) Gate-Source Leakage Current (VGS = ±30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS , ID = 2.5mA) Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ T C = 25°C Pulsed Drain Current 1 Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ T C = 25°C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current 1 (Repetitive and Non-Repetitive) Repetitive Avalanche Energy 1 Single Pulse Avalanche Energy 4 STATIC ELECTRICAL CHARACTERISTICS Symbol BV DSS ID(on) R DS(on) IDSS IGSS VGS(th) CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com T-MAX ™ USA 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364 EUROPE Chemin de Magret F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 G D S TO-264 B2LC LLC 050-5929 rev A 8-2000 Power MOS VI TM is a new generation of low gate charge, high voltage N-Channel enhancement mode power MOSFETs. Lower gate charge is achieved by optimizing the manufacturing process to minimize Ciss and Crss. Lower gate charge coupled with Power MOS VITM optimized gate layout, delivers exceptionally fast switching speeds.

  • Identical Specifications: T-MAX™ or TO-264 Package
  • Lower Gate Charge & Capacitance • Easier To Drive
  • 100% Avalanche Tested • Faster switching POWER MOS VI TM APT10050B2LC APT10050LLC 1000V 21A 0.500 W

ADVANCED TECHNICALINFORMATION

1 Repetitive Rating: Pulse width limited by maximum junction3 See MIL-STD-750 Method 3471

temperature. 4 Starting Tj = +25°C, L = 41.32mH, RG = 25W, Peak IL = 21A

2 Pulse Test: Pulse width < 380 µS, Duty Cycle < 2%

APT Reserves the right to change, without notice, the specifications and information contained herein. APT's devices are covered by one or more of the following U.S.patents: 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 DYNAMIC CHARACTERISTICS APT10050 B2LC - LLC Symbol C iss C oss C rss Q g Q gs Q gd td(on) tr td(off) tf Test Conditions VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 0.5 VDSS ID = 0.5 ID[Cont.] @ 25°C VGS = 15V VDD = 0.5 VDSS ID = ID[Cont.] @ 25°C R G = 0.6W MIN TYP MAX 5000 600 190 170 8.5 UNIT pF nC ns Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge 3 Gate-Source Charge Gate-Drain ("Miller") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS UNIT Amps Volts ns µC MIN TYP MAX 1.3 960 22.0 THERMAL CHARACTERISTICS Symbol R qJC R qJA MIN TYP MAX 0.24 UNIT °C/W Characteristic Junction to Case Junction to Ambient Symbol IS ISM VSD t rr Q rr Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current 1 (Body Diode) Diode Forward Voltage 2 (VGS = 0V, IS = -ID[Cont.]) Reverse Recovery Time (IS = -ID[Cont.], dlS /dt = 100A/µs) Reverse Recovery Charge (IS = -ID[Cont.], dlS /dt = 100A/µs) 050-5929 rev A 8-2000 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) 4.50 (.177) Max. 19.81 (.780) 20.32 (.800) 20.80 (.819) 21.46 (.845) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 5.45 (.215) BSC 2.87 (.113) 3.12 (.123) 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 2.21 (.087) 2.59 (.102) 0.40 (.016) 0.79 (.031) Drain Source Gate These dimensions are equal to the TO-247 without the mounting hole. Drain 2-Plcs. 19.51 (.768) 20.50 (.807) 19.81 (.780) 21.39 (.842) 25.48 (1.003) 26.49 (1.043) 2.29 (.090) 2.69 (.106) 0.76 (.030) 1.30 (.051) 3.10 (.122) 3.48 (.137) 4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 2.59 (.102) 3.00 (.118) 0.48 (.019) 0.84 (.033) Drain Source Gate Dimensions in Millimeters and (Inches) Drain 2.29 (.090) 2.69 (.106) 5.79 (.228) 6.20 (.244) 2.79 (.110) 3.18 (.125) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) T-MAX TM (B2) Package Outline TO-264 (L) Package Outline