APSSO7050 AURIS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

4.13 Oscillator SMD, spread spectrum, programmable auris-GmbH office@auris-gmbh.de www.auris-gmbh.de All specifications are subject to change without notice. Drawing APSO 5032 APSO 7050 Dimensions in mm Operating conditions Vdd Vdd HCMOS Unit V Description Min Max Supply voltage 2.25 µS pF 100 max capacitive load on outputs for CMOS levels 15 pF Frequency: <40MHz Frequency: <40-200MHz Rise Time 3.6 Features: Supply voltage 2,5V + 3,3V Different spread widths available Short delivery time Storage temperature -55°C ~ +125°C Programmable voltage Operating temperature -40°C ~ +85°C HCMOS APSO 7050 / APSO 5032 Frequency range 1.5MHz ~ 200MHz Frequency stability ±25ppm ~ ±100ppm 3.3V ±10% ±5ppm Remarks Please specify Please specify Please specify Specifications Programmable voltage 1 ~ 166 MHz 2.5V ±10% Aging (ppm / Year), Ta = 25C, Vdd = 5 / 3.3 V Programmable output level 1 ~ 200 MHz Order key O - 10.000000M - APSO 7050 - 50 - 2.5 - A / T / C / Part Frequency Type/Package Tolerance Voltage Temperature Option Spread Packaging O=Oscillator M=MHz APQO= programmable QO ±ppm 2.5=2.5Volt A= 0°C ~ +70°C T= Tristate blank = tube 7050=SMD 7x5 3.3=3.3Volt B= -10°C ~ +60°C P= Power please C= -10°C ~ +70°C down see D= -20°C ~ +70°C table 1 E= -40°C ~ +85°C APSSO 7050 APSSO 5032

4.14 Oscillator SMD, spread spectrum, programmable auris-GmbH office@auris-gmbh.de www.auris-gmbh.de All specifications are subject to change without notice. Table 1 spreadspread Duty cycle Output clock rise / fall Start up time Unit Output clock switching characteristics From power on 0.2-0.8Vdd, 2.25-3.6 Vdd, Cl=30 0.2-0.8Vdd, 2.25-3.6Vdd, Cl=15 2.25V~3.6V Vdd 55

Description

HCMOS @ Vdd/2 ns Typ MaxTest conditions Min 10 ms 4.0 2.4 ns

Electrical characteristics

Input characteristics (Pin 1) VIL, Low-level input voltage TO Tri-state or power-down VIH, High-level input voltage TO Enable output or no connect IIL, Input low current IIH, Input high current Output characteristics VOL, Low-level output voltage VOHCMOS, High-level CMOS voltage Power supply current (unloaded) Input pull-up resistor Tri-state leakage current Output is tri-statedOutput enable mode Output is power down 0.4 70 90

0.2 Vdd V

UnitDiscription Test conditions 3.0 ~ 3.6 V Vdd VIN = 0V 2.25 V ~ 3.6 V Vdd, -8 mA IOL VIN = Vdd 2.25 ~ 3.6 Vdd, OUTPUT FREQ ≤ 200 MHz 3.6V Vdd Max

0.7 Vdd

3.0 ~ 3.6 V Vdd Min Typ 10 µA µA V µA 3.0 V ~ 3.6 V Vdd, 8 mA IOL Vdd - 0.4 2.25 ~ 3.6V Vdd, VIN = 0.7V V V mA35 APSSO 7050 APSSO 5032