APSK2R5E CHEMI-CON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations. CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Super low ESR, high ripple current capability Downsized from PSE series (П6.3ʷ8L to П5ʷ8L) Longer life (5,000 hours at 105ˆ) ESR after endurance is speci/g192ed within the initial spec RoHS Compliant Halogen Free ˗SPECIFICATIONS (at 20ˆ, 120Hz) (at 105ˆ) (at 20ˆ after 2 minutes) (at 20ˆ, 120Hz) (at 100kHz) Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current*Note Dissipation Factor (tanЎ) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test Failure Rate Items -55 to +105ˆ 2.5Vdc ʶ20% (M) Rated voltage(V)ʷ1.15 500/g1125A max. 0.10 max. Z(-25ˆ)/Z(+20ˆ)ʽ1.15 Z(-55ˆ)/Z(+20ˆ)ʽ1.25 The following specifications shall be satisfied when the capacitors are restored to 20ˆ after the rated voltage is applied for 5,000 hours at 105ˆ. Appearance No significant damage Capacitance change ʽʶ20% of the initial value ʽʶ20% of the initial value ʽʶ20% of the initial value D.F. (tanЎ) ʽThe initial specified value ESR ʽThe initial specified value Leakage current ʽThe initial specified value ʽThe initial specified value ʽThe initial specified value ʽThe initial specified value ʽThe initial specified value ʽThe initial specified value ʽThe initial specified value The following specifications shall be satisfied when the capacitors are restored to 20ˆ after subjecting them to DC voltage at 60ˆ, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change D.F. (tanЎ) ESR Leakage current The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105ˆ for 30 seconds through a protective resistor(R=1kЊ) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change D.F. (tanЎ) ESR Leakage current 0.5% per 1,000 hours maximum (Confidence level 60% at 105ˆ) Characteristics ˗DIMENSIONS [mm] ˗MARKING *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105ˆ. Size code ПD Пd F ПD' E08 5.0 0.45 2.0 ПD+0.5max. L+1.0max. Coated Case L' 15min. 4min. ПD' Пd Fʶ0.5 K6D6 560 2.5V EX) 2.5V560/g1125F Terminal Code : E New! Downsized PSK PSE Radial Lead CAT. No. E1001L(1/2)
Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations. CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS ˗PART NUMBERING SYSTEM Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560μF:561) Terminal code Voltage code Series code Category A P S K 2 R 5 E A A 5 6 1 E 0 8 SM 13 4 2 6 7 8 9 10 13 1251 8 171611 15 14 ˗STANDARD RATINGS ˘˘ : Enter the appropriate lead forming or taping code. Case size ПDʷL (mm) ESR (mЊmax./20ˆ, 100k to 300kHz) Rated ripple current (mArms/105ˆ, 100kHz) Part No. 2.5 220 5ʷ8 APSK2R5E˘˘221ME08S APSK2R5E˘˘331ME08S APSK2R5E˘˘471ME08S APSK2R5E˘˘561ME08S 4,3507 330 5ʷ8 470 5ʷ8 560 5ʷ8 4,3507 4,3507 4,3507 New! Please refer to "Product code guide (conductive polymer type)" WV(Vdc) Cap( F) Lead forming.Taping code Radial Lead CAT. No. E1001L(2/2)