APSG160E102MH20S

APSG250ELL331MJB5S NPC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Radial Lead NPCAP TM -PSGSeries ・Super low ESR, high ripple current capability ・Endurance: 15,000 to 20,000 hours at 105℃ ・Rated voltage : 16 to 25Vdc ・RoHS Compliant ・Halogen Free ◆SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105℃ Rated Voltage 16 to 25Vdc Capacitance Tolerance ±20% (M) (at 20℃, 120Hz) Surge Voltage Rated voltage(V)×1.15 (at 105℃) Leakage Current *Note I=0.2CV or 500µA, whichever is greater Where, I : Leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Dissipation Factor (tanЎ) 0.12 max. (at 20℃, 120Hz) Low Temperature Characteristics (Max.Impedance Ratio) Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 20,000 hours (20, 25V : 15,000 hours) at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Surge Voltage Test The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] Size code φD φd F φD' 0.45 6.3 2.5 8.0 0.6 3.5 HB5H08H06F08F05 H16 H20 JB5 J16 J20 10.0 5.0 L+1.5max.L+1.0max. (Note1) φD+0.5max. Coated Case L' 15min. 4min. φD' φd F±0.5 F±0.5 Coated Case L' 15min. 4min. φD' φd F05,F08,H06,H08 HB5,H16,H20,JB5,J16,J20

• Terminal Code : E Note1 : L+1.2 max. for 16V270µF (Rated ripple current 5,080mArms). Upgrade! Downsized PSG PSF P52 ◆MARKING G 6D6 150 16V EX) 16V150µF CAT. No. E1001P CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Radial Lead NPCAP TM -PSGSeries ◆PART NUMBERING SYSTEM Supplement code Size code Capacitance tolerance code Capacitance code (ex. 150µF:151,1,000µF:102) Lead forming·Taping code Terminal code Voltage code (ex. 16V:160,20V:200) Series code Category A P S G E SM 1 3 42 6 7 8 9 10 13125 18171611 1514 Please refer to “Product code guide (conductive polymer type)” ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size ПDʷL (mm) ESR (mЊ max./20ˆ, 100k to 300kHz) Rated ripple current (mArms/105ˆ, 100kHz) Part No. 150 6.3×5 20 3,200 APSG160E□□151MF05S 270 6.3×8 10 5,080 APSG160E□□271MF08J 270 6.3×8 15 3,800 APSG160E□□271MF08S 270 8×6 22 3,300 APSG160E□□271MH06S 470 8×8 8 5,400 APSG160E□□471MH08J 470 8×8 16 4,000 APSG160E□□471MH08S 560 8×11.5 8 6,100 APSG160E□□561MHB5J 560 8×11.5 14 4,970 APSG160E□□561MHB5S 820 8×16 8 7,000 APSG160E□□821MH16S 820 10×11.5 12 5,400 APSG160E□□821MJB5S 1,000 8×20 8 7,500 APSG160E□□102MH20S 1,000 10×11.5 12 5,400 APSG160E□□102MJB5S 1,200 8×20 8 7,500 APSG160E□□122MH20S 1,500 10×16 8 7,700 APSG160E□□152MJ16S 1,800 10×20 8 8,100 APSG160E□□182MJ20S 2,200 10×20 8 8,100 APSG160E□□222MJ20S 120 6.3×5 20 3,200 APSG200E□□121MF05S 180 6.3×8 18 3,460 APSG200E□□181MF08S 330 8×8 17 3,880 APSG200E□□331MH08S 390 8×11.5 14 4,970 APSG200E□□391MHB5S 680 10×11.5 12 5,400 APSG200E□□681MJB5S 56 6.3×5 30 2,600 APSG250E□□560MF05S 82 6.3×8 28 2,780 APSG250E□□820MF08S 180 8×8 18 3,770 APSG250E□□181MH08S 180 8×11.5 16 4,650 APSG250E□□181MHB5S 220 8×11.5 16 4,650 APSG250E□□221MHB5S 330 10×11.5 14 5,000 APSG250E□□331MJB5S 390 10×11.5 14 5,000 APSG250E□□391MJB5S □□ : Enter the appropriate lead forming or taping code. Upgrade! (Note2) : PSG series, 16V270µF (Rated ripple current 5,080mArms) ,16V470µF (Rated ripple current 5,400mArms) ,16V560µF (Rated ripple current 6,100mArms)have supplement code “J”. Terminal and terminal plating are the same as all other inPSG series. CAT. No. E1001P CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS