APSF160EC3101

APSF160EC3101 CHEMI-CON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Radial Lead NPCAP TM -PSFSeries ・Super low ESR, high ripple current capability ・ESR 5mΩmax. (2 to 4Vdc) ・Longer life (20,000 hours at 105℃) ・Rated voltage range : 2 to 16Vdc ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ・Halogen Free ◆SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105℃ Rated Voltage Range 2 to 16Vdc Capacitance Tolerance ±20%(M) (at 20℃, 120Hz) Surge Voltage Rated voltage(V)×1.15 (at 105℃) Leakage Current *Note Shall not exceed values shown in STANDARD RATINGS. (at 20℃ after 2 minutes) Dissipation Factor (tanЎ) 0.10 max. (at 20℃, 120Hz) Low Temperature Characteristics (Max.Impedance Ratio) Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 20,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR 2 to 6.3Vdc : ≦The initial specified value 16Vdc : ≦150% of the initial specified value Leakage current ≦The initial specified value Surge Voltage Test The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR 2 to 6.3Vdc : ≦The initial specified value 16Vdc : ≦150% of the initial specified value Leakage current ≦The initial specified value Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] Coated Case L' 15min. 4min. φD' φd Coated Case L' 15min. 4min. φD' φd F±0.5F05, F08, H08 FA5, HB5, JB5 F±0.5 (FA5) (HB5, JB5) F±0.5 Size code φD φd F φD' F05 0.45 F08 6.3 0.6 2.5 FA5 0.5 L+0.3max. H08 L+1.0max. HB5 0.6 JB5 10.0 5.0 8.0 3.5 L+1.5max.L+1.0max. (Note1) φD+0.5max.

• Terminal Code : E Lower ESR PSF PSE P56 ◆MARKING F 6D6 560 2.5V EX) 2.5V560µF Note1 : L+1.2 max. for 6.3V820µF CAT. No. E1001Q CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Radial Lead NPCAP TM -PSFSeries ◆PART NUMBERING SYSTEM Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560µF:561) Lead forming·Taping code Terminal code Voltage code (ex. 2.5V:2R5, 16V:160) Series code Category A P S F 2 R 5 E A A 5 6 1 F 0 8 SM Please refer to "Product code guide (conductive polymer type)" 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size ПDʷL(mm) Leakage current (µA max./after 2min.) ESR (mЊ max./20ˆ, 100k to 300kHz) Rated ripple current (mArms/105ˆ, 100kHz) Part No. 2 1,000 6.3×8 500 5 5,900 APSF2R0E□□102MF08S 2.5 330 6.3×8 500 5 5,900 APSF2R5E□□331MF08S 470 6.3×8 500 5 5,900 APSF2R5E□□471MF08S 560 6.3×8 500 5 5,900 APSF2R5E□□561MF08S 820 6.3×8 500 5 5,900 APSF2R5E□□821MF08S 1,200 6.3×8 1,200 5 5,900 APSF2R5E□□122MF08S 1,600 8×8 800 5 6,100 APSF2R5E□□162MH08S 4 470 6.3×8 500 5 5,900 APSF4R0E□□471MF08S 560 6.3×8 500 5 5,900 APSF4R0E□□561MF08S 6.3 820 6.3×8 1,030 8 4,700 APSF6R3E□□821MF08S 100 6.3×5 500 24 2,490 APSF160E□□101MF05S 100 6.3×10.5 500 25 2,820 APSF160E□□101MFA5S 270 8×8 864 10 5,000 APSF160E□□271MH08S 270 8×11.5 864 11 5,080 APSF160E□□271MHB5S 330 8×8 1,050 13 4,700 APSF160E□□331MH08S 470 8×11.5 1,500 11 5,400 APSF160E□□471MHB5S 470 10×11.5 1,500 10 6,100 APSF160E□□471MJB5S □□ : Enter the appropriate lead forming or taping code. CAT. No. E1001Q CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS