APSC6R3ELL152

APSC6R3ELL152 CHEMI-CON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Radial Lead NPCAP TM -PSCSeries ・Super low ESR, high ripple current capability ・Lower profile than PSA (φ8×8L to φ10×12.5L) ・Rated voltage range : 2.5 to 16Vdc ・Nominal capacitance range : 270 to 2,700µF ・Endurance : 15,000 hours at 105℃ ・Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards ・Added 2.5V 820µF (ESR 5mΩ max.) ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ・Halogen Free ◆SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105℃ Rated Voltage Range 2.5 to 16Vdc Capacitance Tolerance ±20% (M) (at 20℃, 120Hz) Surge Voltage Rated voltage×1.15 (at 105℃) Leakage Current *Note I=0.2CV or 500µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (Vdc) (at 20℃ after 2 minutes) Dissipation Factor (tanЎ) 0.10 max. (at 20℃, 120Hz) Low Temperature Characteristics (Max.Impedance Ratio) Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Surge Voltage Test The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] Size code φD φd F φD' H08 8.0 0.6 3.5 L+1.0max. HB5 8.0 0.8 (Note1) 3.5 JB5 10.0 0.8 (Note1) 5.0 JC5 10.0 0.6 5.0 L+1.5max. φD+0.5max. Note1 : 0.6 for rated volt 16V. Coated Case L' 15min. 4min. φD' φd F±0.5

• Terminal Code : E Low profile Lower ESR PSC PSA P60 ◆MARKING C 3D6 820 2.5V EX) 2.5V820µF CAT. No. E1001Q CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Radial Lead NPCAP TM -PSCSeries ◆PART NUMBERING SYSTEM Supplement code (Note2) Size code Capacitance tolerance code Capacitance code (ex. 330µF:331, 1000µF:102) Lead forming·Taping code Terminal code Voltage code (ex. 4V:4R0,6.3V:6R3,10V:100) Series code Category A P S C A A A E A A A A A A A A SM 1 3 42 6 7 8 9 10 13125 18171611 1514 Please refer to "Product code guide (conductive polymer type)" (Note2) PSC series, 2.5V820µF(ESR 5mΩ max.) has supplement code "J". Can case, terminal and terminal plating are the same as all others in PSC series. ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size ПDʷL(mm) ESR (mЊ max./20ˆ, 100k to 300kHz) Rated ripple current (mArms/105ˆ, 100kHz) Part No. 2.5 560 8×8 7 6,100 APSC2R5E□□561MH08S 820 8×8 5 6,100 APSC2R5E□□821MH08J 820 8×8 7 6,100 APSC2R5E□□821MH08S 1,000 8×8 7 6,100 APSC2R5E□□102MH08S 1,000 8×11.5 7 6,100 APSC2R5E□□102MHB5S 1,500 8×11.5 7 6,100 APSC2R5E□□152MHB5S 2,700 10×11.5 8 5,560 APSC2R5E□□272MJB5S 560 8×8 7 6,100 APSC4R0E□□561MH08S 680 8×11.5 7 6,100 APSC4R0E□□681MHB5S 1,000 10×11.5 6 6,640 APSC4R0E□□102MJB5S 6.3 470 8×8 8 5,700 APSC6R3E□□471MH08S 560 8×8 8 5,700 APSC6R3E□□561MH08S 820 10×11.5 7 6,640 APSC6R3E□□821MJB5S 1,500 10×11.5 10 5,560 APSC6R3E□□152MJB5S 10 390 8×11.5 9 5,650 APSC100E□□391MHB5S 680 10×11.5 7 6,100 APSC100E□□681MJB5S 270 8×11.5 11 5,080 APSC160E□□271MHB5S 330 10×11.5 10 6,100 APSC160E□□331MJB5S 330 10×12.5 10 6,100 APSC160E□□331MJC5S 470 10×11.5 10 6,100 APSC160E□□471MJB5S □□ : Enter the appropriate lead forming or taping code. CAT. No. E1001Q CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS