APSA2R5ESS391MF9JG CHEMI-CON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead CAT. No. E1001E @Super low ESR, high temperature resistance and high ripple current capability @Rated voltage range : 2.5 to 16Vdc @2000 hours at 105C @Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards @Pb-free design ?SPECIFICATIONS (at 20C, 120Hz) (at 105C) (at 20C after 2 minutes) (at 20C, 120Hz) Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note Dissipation Factor (tane) Low Temperature Characteristics Endurance Bias Humidity Test Surge Voltage Test Failure Rate Items -55 to +105C 2.5 to 16Vdc P20% (M) Rated voltageB1.15V I=0.2CV (max.) Where, I : Leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V dc) 0.08 max. Max. impedance ratio at 100kHz to the 20C value The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 105C. Appearance No significant damage Capacitance change [P20% of the initial measured value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C, 90 to 95% RH for 1000 hours. Appearance No significant damage Capacitance change [P20% of the initial measured value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change [P20% of the initial measured value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value 1% per 1000 hours maximum (Confidence level 60% at 105C) Characteristics ?DIMENSIONS [mm] ?MARKING *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C. fD fd F 6.3 0.5 L+1.0 2.5 3.5 0.8 L+1.5 Coated Case L+1.5 max. 15min. 4min. FD+0.5max. Fd FP0.5 A 292 560 EX) 4V560MF @Terminal Code : E Up grade! (1/2)
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead CAT. No. E1001E ?STANDARD RATINGS ?PART NUMBERING SYSTEM WV(V dc) Cap( mF) Case size fD bL(mm) ESR (momax/20c, 100k to 300kHz) Rated ripple current (mArms/105 c, 100kHz) Part No. 2.5 390 6.3 B9.8 20 3160 APSA2R5E SS391MF9JG 680 8 B11.5 7 5580 APSA2R5E SS681MHB5S 820 8 B11.5 7 5580 APSA2R5E SS821MHB5S 1000 10 B11.5 6 5860 APSA2R5E SS102MJB5S 270 6.3 B9.8 20 3160 APSA4R0E SS271MF9JG 390 6.3 B9.8 24 3300 APSA4R0E SS391MF9JG 560 8 B11.5 7 5580 APSA4R0E SS561MHB5S 820 10 B11.5 6 5860 APSA4R0E SS821MJB5S 6.3 220 6.3 B9.8 20 3160 APSA6R3E SS221MF9JG 330 6.3 B9.8 28 3190 APSA6R3E SS331MF9JG 390 8 B11.5 8 5080 APSA6R3E SS391MHB5S 680 10 B11.5 7 5860 APSA6R3E SS681MJB5S 47 6.3 B9.8 25 2820 APSA100E SS470MF9JG 68 6.3 B9.8 25 2820 APSA100E SS680MF9JG 100 6.3 B9.8 25 2820 APSA100E SS101MF9JG 150 6.3 B9.8 25 2820 APSA100E SS151MF9JG 270 8 B11.5 9 4710 APSA100E SS271MHB5S 470 10 B11.5 8 5650 APSA100E SS471MJB5S 16 100 6.3 B9.8 25 2820 APSA160E SS101MF9JG SS : Lead forming code and taping code Supplement code Size code Capacitance tolerance code Capacitance code (ex. 270MF:271,1000MF:102) Lead forming·Taping code Terminal code Voltage code (ex. 4V:4R0,6.3V:6R3,10V:100) Series code Category A P S A A A A E A A A A A A A A SM 13 4 26 7 8 9 1 0 51 2 1 3 11 16 17 18 1514 Please refer to "A guide to global code (conductive polymer type)" Up grade! (2/2)