APSA100ELL471 CHEMI-CON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead CAT. No. E1001K @Super low ESR, high temperature resistance and high ripple current capability @Rated voltage range : 2.5 to 16Vdc @Endurance : 2,000 hours at 105C @Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards @RoHS Compliant ?SPECIFICATIONS (at 20C, 120Hz) (at 105C) (at 20C after 2 minutes) (at 20C, 120Hz) (at 100kHz) Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test Failure Rate Items -55 to +105C 2.5 to 16Vdc P20% (M) Rated voltageB1.15 I=0.2CV Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V dc) 0.08 max. (FA5 size : 0.12max.) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2,000 hours at 105C. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105C) Characteristics ?DIMENSIONS [mm] ?MARKING *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C. Coated Case L' 15min. 4min. FD+0.5max. Fd FP0.5 FP0.5 (FA5) (HB5, JB5) A 292 560 EX) 4V560MF @Terminal Code : E Lower ESR PSA Low profile Lower ESR PS PSC Size code fD fd F fD' FA5 6.3 0.5 2.5 L+0.3max HB5 8.0 3.5 FD+0.5max JB5 10.0 5.0 0.8 L+1.5max (1/2)
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead CAT. No. E1001K ?STANDARD RATINGS ?PART NUMBERING SYSTEM WV(V dc) Cap( mF) Case size fD bL(mm) ESR (momax/20c, 100k to 300kHz) Rated ripple current (mArms/105 c, 100kHz) Part No. 2.5 390 6.3 B10.5 20 3,160 APSA2R5E SS391MFA5S 680 8 B11.5 7 5,580 APSA2R5E SS681MHB5S 820 8 B11.5 7 5,580 APSA2R5E SS821MHB5S 1,000 10 B11.5 6 5,860 APSA2R5E SS102MJB5S 1,500 10 B11.5 7 5,860 APSA2R5E SS152MJB5S 270 6.3 B10.5 20 3,160 APSA4R0E SS271MFA5S 390 6.3 B10.5 24 3,300 APSA4R0E SS391MFA5S 560 8 B11.5 7 5,580 APSA4R0E SS561MHB5S 820 10 B11.5 6 5,860 APSA4R0E SS821MJB5S 6.3 220 6.3 B10.5 20 3,160 APSA6R3E SS221MFA5S 330 6.3 B10.5 28 3,190 APSA6R3E SS331MFA5S 390 8 B11.5 8 5,080 APSA6R3E SS391MHB5S 470 8 B11.5 7 5,700 APSA6R3E SS471MHB5S 680 10 B11.5 7 5,860 APSA6R3E SS681MJB5S 47 6.3 B10.5 25 2,820 APSA100E SS470MFA5S 68 6.3 B10.5 25 2,820 APSA100E SS680MFA5S 100 6.3 B10.5 25 2,820 APSA100E SS101MFA5S 150 6.3 B10.5 25 2,820 APSA100E SS151MFA5S 270 8 B11.5 9 4,710 APSA100E SS271MHB5S 470 10 B11.5 8 5,650 APSA100E SS471MJB5S 16 100 6.3 B10.5 25 2,820 APSA160E SS101MFA5S SS : Enter the appropriate lead forming or taping code. Supplement code Size code Capacitance tolerance code Capacitance code (ex. 270MF:271, 1,000MF:102) Lead forming·Taping code Terminal code Voltage code (ex. 4V:4R0, 6.3V:6R3, 10V:100) Series code Category A P S A A A A E A A A A A A A A SM 13 4 26 7 8 9 1 0 51 2 1 3 11 16 17 18 1514 Please refer to "Product code guide (conductive polymer type)" (2/2)