APS5130PD7C-P22 KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

© 2017 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.4 Date: 09/04/2017 Page 1 / 4

DESCRIPTION

z The APS5130PD7C-P22 Color Sensor Device, consisting of 3-Channel/1Chip (R, G, B) Si photodiode is a good effective solution to color balance of display backlighting appliances

FEATURES

z Component in accordance with RoHS z SMD style package on PCB technology z Integral Color Filter in Blue, Green, or Red z Package: 1500 pcs / reel z Moisture sensitivity level: 3 z RoHS Compliant

APPLICATIONS

The devices are suitable for : z Colorimetry z Printing process control z Display color correction PACKAGE DIMENSIONS ABSOLUTE MAXIMUM RATINGS at TA=25°C (UNLESS OTHERWISE SPECIFIED) Note: 1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. APS5130PD7C-P22 RGB Color Sensor RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Parameter Symbol Value Unit Reverse Voltage V R 10 V Operating Temperature T opr -40 to +85 °C Storage Temperature T stg -40 to +85 °C Soldering Temperature T sd 260 °C Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

© 2017 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.4 Date: 09/04/2017 Page 2 / 4 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C (UNLESS OTHERWISE SPECIFIED) APS5130PD7C-P22 Notes: 1.White fluorescent light (Color Temperature = 6500K) is used as light source. 2. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Symbol Parameter Condition Value Unit Min. Typ. Max. IL1 Light Current (1) 100Lux [1] VR = 5V Red - 0.039 - uA Green - 0.042 - Blue - 0.022 - IL2 Light Current (2) 1000Lux [1] VR = 5V Red - 0.427 - uA Green - 0.498 - Blue - 0.262 - D Diameter of the irradiation sensitive area - 2.0 - mm A Irradiation sensitive area per element - 0.85 - mm2 SMax Photo sensibility of the single color areas λ R = 620 nm λ G = 550 nm λ B = 470 nm 0.33 0.25 0.18 - A/W ID Reverse Dark Current VR = 5V - - 10 nA λ 0.1 Range of spectral bandwidth Red 570 - 670 nm Green 450 - 650 Blue 370 - 530 λp Wavelength of peak sensitivity Red - 620 - nm Green - 550 - Blue - 470 - 2θ1/2 Angle of half sensitivity - 120 - deg 0.5 0.5 90° 15°0° 30° 45° 60° 75° -15° -30° -45° -60° -75° -90° 0.01.0 1.0 Ta = 25 °C Relative Radiant Sensitivity vs. Angular Displacement Relative sensitivity 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0 1 02 03 04 05 06 07 08 0 Dark Current vs. Ambient Temperature Ambient temperature (°C) Dark current(nA) 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 R G B Ta = 25 °C Relative Spectral Responsivity vs. Wavelength Wavelength (nm) Relative spectral sensitivity (a. u.) Fig.1 Fig.2 Fig.3

© 2017 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.4 Date: 09/04/2017 Page 3 / 4 Input Pow er=1mW/cm2 RLED=626nmn FWHM=20nm GLED=520nmn FWHM=35nm BLED=461nmn FWHM=20nm Oput Current(uA) Fig.4 R,G,B LED Test vs. Output Photocurrent Fig.5 R,G,B LED Test vs. Output Photocurrent TYPICAL ELECTRO - OPTICAL CHARACTERISTICS CURVES APS5130PD7C-P22 Input Pow er=10mW/cm2 RLED=626nmn FWHM=20nm GLED=520nmn FWHM=35nm BLED=461nmn FWHM=20nm Oput Current(uA)

© 2017 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.4 Date: 09/04/2017 Page 4 / 4 TAPE SPECIFICATIONS (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS APS5130PD7C-P22 Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference on ly. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application ha s special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes