APS3227SP1C-P22 KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

© 2017 Kingbright. All Rights Reserved. Spec No: DSAO8898 / 1207100002 Rev No: V.4 Date: 09/04/2017 Page 1 / 3

DESCRIPTION

z The APS3227SP1C-P22 is a NPN silicon phototransistor, It is a good effective solution to the power saving of display backlighting appliances and the device is sensitive to the visible spectrum

FEATURES

z Component in accordance with RoHS z Adapted to human eye responsive z Wide angle of half sensitivity z Moisture sensitivity level: 3 z Package: 2000 pcs / reel

APPLICATIONS

Detection of ambient light to control display backlighting in: z Mobile phones z PDAs z Note books z Video cameras PACKAGE DIMENSIONS ABSOLUTE MAXIMUM RATINGS at TA=25°C Note: 1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. APS3227SP1C-P22 Ambient Light Photo Sensor RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Parameter Symbol Value Unit Notice Collector Emitter Voltage V ceo 60 V Iceo = 100 μ A Emitter-Collector Voltage V eco 4 V Ieco = 100 μ A Operating Temperature T opr -40 to +85 °C - Storage Temperature T stg -40 to +85 - °C Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

© 2017 Kingbright. All Rights Reserved. Spec No: DSAO8898 / 1207100002 Rev No: V.4 Date: 09/04/2017 Page 2 / 3 100 1000 10000 1 10 100 1000 10000 Illuminance vs. Output Phtocurrent Illuminance Ev (Lux) Output current (µA) Ta = 25 °C,Vce = 5V Flourescent Light Incandescent Lamp 20% 40% 60% 80% 100% 300 400 500 600 700 800 900 1000 1100 Ta = 25 °C Relative Spectral Responsivity vs. Wavelength Wav elength (nm) Relative spectral sensitivity (a. u.) CONVERTING PHOTOCURRENT TO VOLTAGE ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C APS3227SP1C-P22 Parameter Symbol Value Unit Conditions Typ. Max. Collector Emitter Breakdown Voltage BVceo - - V Iceo = 100 μ A Emitter Collector Breakdown Voltage BVeco - - V Ieco = 100 μ A Collector dark current ID 10 100 nA VCE = 5V EV = 0Lx Light Current (1) IPH1 6 - μ A VCE = 5V, Ev = 100 Lx [1] Light Current (2) IPH2 130 - μ A VCE = 5V, Ev = 1000 Lx [1] Angle of half sensitivity 2θ1/2 120 - deg Min. Wavelength of peak sensitivity λp - 580 - nm Saturation Output Voltage Vo 4.5 4.7 - V VCC = 5V, EV = 1000Lx [1], RL = 75K Ω Range of spectral bandwidth λ 0.1 390 - 950 nm Light Current (3) IPH3 - 950 - μ A VCE = 5V, Ev = 1000 Lx [2] Light Current (4) IPH4 - 420 - μ A VCE = 5V, Ev = 1000 Lx [3] Collector Emitter Saturation Voltage VCE (sat) - - 0.4 V IC = 10 mA Response Wavelength λ 390 - 700 nm >10% Response Notes: 1. White Fluorescent light (Color Temperature = 6200K) is used as light source. 2. Luminance by CIE standard illuminant-A/2856K,incandescet lamp. 3. Sunlight (Color Temperature = 4600K) is used as light source. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. The output voltage (Vout) is the product of photocurrent (IPH) and loading resistor (RL) 2. A right loading resistor shall be chosen to meet the requirement of maximum ambient light, and Output saturation voltage: Vout (max) = lout (max.) XRL ≤ Vout (saturation) = Vcc-0.3V Fig.1 Fig.2

© 2017 Kingbright. All Rights Reserved. Spec No: DSAO8898 / 1207100002 Rev No: V.4 Date: 09/04/2017 Page 3 / 3 TAPE SPECIFICATIONS (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS APS3227SP1C-P22 Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference on ly. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application ha s special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes