APS-2R5ESS681MHB5S CHEMI-CON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead CAT. No. E1001E @Super low ESR, high temperature resistance @Large capacitance & Improved high ripple current capability @Rated voltage range : 2.5 to 25Vdc @2000 hours at 105C @Suitable for DC-DC converters, voltage regulators and decoupling applications For computer motherboards @Pb-free design ?SPECIFICATIONS (at 20C, 120Hz) (at 105C) (at 20C after 2 minutes) (at 20C, 120Hz) Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note Dissipation Factor (tane) Low Temperature Characteristics Endurance Bias Humidity Test Surge Voltage Test Failure Rate Items -55 to +105C 2.5 to 25Vdc P20% (M) Rated voltageB1.15V I=0.2CV (max.) Where, I : Leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V dc) 0.12 max. Max. impedance ratio at 100kHz to the 20C value The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 105C. Appearance No significant damage Capacitance change [P20% of the initial measured value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C, 90 to 95% RH for 500 hours. Appearance No significant damage Capacitance change [P20% of the initial measured value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change [P20% of the initial measured value D.F. (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value 1% per 1000 hours maximum (Confidence level 60% at 105C) Characteristics ?DIMENSIONS [mm] ?MARKING *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C. fD L F 11.5 3.5 12.5 5.0 Coated Case L+1.5 max. 15min. 4min. FD+0.5max. F0.6 FP0.5 PS 18M 820 EX) 4V820MF @Terminal Code : E (1/2)
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead CAT. No. E1001E ?STANDARD RATINGS ?PART NUMBERING SYSTEM WV(V dc) Cap(µF) Case size fD bL(mm) ESR (momax/20c, 100k to 300kHz) Rated ripple current (mArms/105 c, 100kHz) Part No. 2.5 680 8 B11.5 10 5230 APS-2R5E SS681MHB5S 1500 10 B12.5 8 5500 APS-2R5E SS152MJC5S 4 560 8 B11.5 10 5230 APS-4R0E SS561MHB5S 820 10 B12.5 8 5500 APS-4R0E SS821MJC5S 6.3 390 8 B11.5 12 4770 APS-6R3E SS391MHB5S 680 10 B12.5 10 5500 APS-6R3E SS681MJC5S 10 270 8 B11.5 14 4420 APS-100E SS271MHB5S 470 10 B12.5 12 5300 APS-100E SS471MJC5S 16 180 8 B11.5 16 4360 APS-160E SS181MHB5S 330 10 B12.5 14 5050 APS-160E SS331MJC5S 20 100 8 B11.5 24 3320 APS-200E SS101MHB5S 150 10 B12.5 20 4320 APS-200E SS151MJC5S 25 68 8 B11.5 24 3320 APS-250E SS680MHB5S 100 10 B12.5 20 4320 APS-250E SS101MJC5S SS : Lead forming code and taping code Supplement code Size code Capacitance tolerance code Capacitance code (ex. 270MF:271,1500MF:152) Lead forming·Taping code Terminal code Voltage code (ex. 4V:4R0,6.3V:6R3,10V:100) Series code Category A P S -A A A E A A A A A A A A SM 13 4 26 7 8 9 1 0 51 2 1 3 11 16 17 18 1514 Please refer to "A guide to global code (conductive polymer type)" (2/2)