APQO14

APQO14_1 AURIS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Features: - Standard DIL14 package - Low cost to performance - 3.0 ~ 5.5 volt available - Tolerance and stability to ± 25ppm - Ultra low jitter <11ps - Tristate or power down available 3.3 APQO 14 Oscillator THT, programmable Oper ating condi tions Vdd CTTL CCMOS 3.0 V ~ 3. 6 V Vdd > 40 ~ 100 MH z 15 pF 3.0 V ~ 3. 6 V Vdd £ 40 MHz 30 pF pF 4.5 V ~ 5. 5 V Vdd > 66 ~ 133 MH z 25 pF Max capaci tive load on out puts for CMO S levels 4.5 V ~ 5. 5 V Vdd £ 66 MHz 50 4.5 V ~ 5. 5 V Vdd > 40 ~ 133 MH z 25 pF 4.5 V ~ 5. 5 V Vdd £ 40 MHz 50 pF Max capaci tive load on out puts for TTL levels Suppl y voltage 3.0 5.5 V Descri ption Min Max Unit Drawing APQO 14 Dimensions in mm Aging (ppm / Year), Ta = 25C, Vdd = 5 / 3.3 V ±5ppm Programmable output level CMOS / TTL Programmable voltage 1 ~ 100 MHz 3.0V ~ 3.6V Storage temperature -55°C ~ +125°C Programmable voltage 1 ~ 133 MHz 4.5V ~ 5.5V Frequency stability ±25ppm ~ ±100ppm Please specify Operating temperature 0°C ~ +70°C - -40°C ~ +85°C Please specify APQO 14 Remarks Frequency range 1 ~ 133MHz Please specify Specifications Order key O - 50.000000M - APQO 14 - 50 - 5.0 - A / T / Part Frequency Type/Package Tolerance Voltage Temperature Option Packaging O=Oscillator M=MHz APQO=programmable QO ±ppm 5.0=5.0Volt A= 0°C ~ +70°C T = Tristate blank = Tube 14=DIL 14 3.3=3.3Volt B= -10°C ~ +60°C P = Power down C= -10°C ~ +70°C D= -20°C ~ +70°C E= -40°C ~ +85°C auris-GmbH office@auris-gmbh.de www.auris-gmbh.de All specifications are subject to change without notice.

3.4 APQO 14 Oscillator THT, programmable

Electrical characteristics

Input characteristics (Pin 1) VIL, Low-level input voltage TO Tri-state or power-down VIH, High-level input voltage TO Enable output or no connect IIL, Input low current IIH, Input high current Output characteristics VOL, Low-level output voltage VOHTTL, High-level output voltage TTL 4.5 V ~ 5.5 V Vdd, -16 mA IOL VOHCMOS 4.5 ~ 5.5 Vdd, -16 mA IOL High-level CMOS voltage 3.0 V ~ 3.6 V Vdd, -8 mA IOL Power supply current (unloaded) Standby current Input pull-up resistor (PIN 1) Tri-state leakage current Output enable mode Power down mode 4.5 ~ 5.5 Vdd, VIN = 0V 3.0 MÙ 4.5 ~ 5.5 Vdd, VIN = 0.7 V 1.1 8.0 50 100 200 KÙ mA 10 50 µA 3.0 ~ 3.6 Vdd, OUTPUT FREQ £ 100 MHz 25 4.5 ~ 5.5 Vdd, OUTPUT FREQ £ 133 MHz 45 mA Vdd - 0.4 VIN = Vdd 5 µA V4.5 V ~ 5.5 V Vdd, 16 mA IOL 0.4 3.0 ~ 3.6 V Vdd V VIN = 0V 10 µA 3.0 ~ 3.6 V Vdd V 4.5 ~ 5.5 V Vdd 2.0 V 4.5 ~ 5.5 V Vdd 0.8 Discription Test conditions Min Typ Max Unit

0.2 Vdd

0.7 Vdd

V 3.0 V ~ 3.6 V Vdd, 8 mA IOL 0.4 20 µA V 2.4 V VVdd - 0.4 V Output is tri-stated Output is tri-stated

5.0 Vdd

auris-GmbH office@auris-gmbh.de www.auris-gmbh.de All specifications are subject to change without notice. Duty cycle TTL @ 1.4 V 4.5 ~ 5.5 Vdd Duty cycle: CMOS @ Vdd / 2 4.5 ~ 5.5 Vdd 3.0 ~ 3.6 Vdd Output clock rise / fall Start up time Power down delay time Synchronous Asynchronous Output disable time Synchronous Asynchronous Output enable time Period Jitter: Ó 3.4 ns ms ns 4.0 ns 1.2 ns 0.9 ns 1.8 ns 55 % 60 % From power on 0.2 ~ 0.8 Vdd, 4.5 ~ 5.5 Vdd, CL = 50 0.8 V ~ 2.0 V, 4.5 ~ 5.5 Vdd, CL = 50 £ 40 MHz, CL £ 30 pF 40 ~ 100 MHz, CL £ 15 pF 60 % 60 % 55 %45 60 % 66 ~ 125 MHz, CL = 25 pF 60 %40 55 % £ 50 MHz, CL = 50 pF 55 %45 Description Test conditions Min Typ Max Unit Output clock switching characteristics 0.8 V ~ 2.0 V, 4.5 ~ 5.5 Vdd, CL = 25 0.8 V ~ 2.0 V, 4.5 ~ 5.5 Vdd, CL = 15 10 15 ns T / 2 T+10 ns OE pin LOW to output Hi-Z T / 2 T+10 ns T = Frequency oscillator period 10 15 ns 100 ns 1 - 133 MHz 8 11 ps Peak to peak £ 33.000 MHz 65 99 ps > 33.000 MHz 65 80 ps PWR_DWN pin LOW to output Hi-Z 50 ~ 66 MHz, CL = 15 pF 125 ~ 133 MHz, CL = 15 pF £ 66 MHz, CL £ 25 pF 66 ~ 125 MHz, CL £ 25 pF 125 ~ 133 MHz, CL £ 15 pF 0.2 ~ 0.8 Vdd, 3.0 ~ 3.6 Vdd, CL = 30