APM-40

APM-40 MINMAX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

AC/DC Power Module 40W, Industrial & Medical Safety E-mail:sales@minmax.com.tw Tel:886 -6-2923150 2015/05/22 REV:2 Page 1 of 5

FEATURES

►Fully Encapsulated Plastic Case for PCB, Chassis and DIN-Rail Mounting Version ►Universal Input 85~264VAC, 47~440Hz ►Protection Class II as per IEC/EN 60536 ►I/O Isolation 4000VAC with Reinforced Insulation ►Operating Temp. Range -40℃ to +80℃ ►Overload/Voltage/Temp. and Short Circuit Protection ►EMI Emission meets EN55011/22 Class B & FCC Level B ►EMC Immunity meets EN61000-4-2,3,4,5,6,8,11 ►UL/cUL/IEC/EN 60950-1 and UL508 Safety Approval ►Medical Safety meets 2xMOPP per 3rd Edition of IEC/EN 60601-1 & ANSI/AAMI ES60601-1 ►CE Marking with EMC and LVD PRODUCT OVERVIEW The new MINMAX APM-40 series is a range of fully encapsulated AC/DC power modules. These high performance products feature an extended operating temperature range of -40°C to +80°C. Universal input voltage 85-264VAC and UL/IEC/EN safety approvals including medical safety and UL508 listing qualify these power supplies modules for applications in products with worldwide markets.EMI-filter meets EN55022, class B and FCC,part15, class B. The APM-40 series power modules provide an economical solution for many space critical applications in commercial, medical and industrial electronic equipment. Model Selection Guide Model Number Output Voltage Output Current Input Current Max. capacitive Load Efficiency (typ.) 115VAC, 60Hz 230VAC, 50Hz Max. @Max. Load @Max. Load, 115VAC VDC mA mA(typ.) μF % APM-40S05 5 8000 716 429 8000 81 APM-40S12 12 3330 689 414 3900 84 APM-40S15 15 2660 680 408 3900 85 APM-40S24 24 1660 687 413 680 84 APM-40D12 ±12 ±1660 687 413 1500# 84 APM-40D15 ±15 ±1330 680 408 1000# 85 # For each output Input Specifications Parameter Model Min. Typ. Max. Unit AC Voltage Input Range All Models 85 --- 264 VAC Input Frequency Range 47 --- 440 Hz DC Voltage Input Range 120 --- 370 VDC No-Load Power Consumption --- --- 0.3 W Inrush Current (Cold Start at 25℃) 115VAC --- --- 30 A

AC/DC Power Module 40W, Industrial & Medical Safety E-mail:sales@minmax.com.tw Tel:886 -6-2923150 2015/05/22 REV:2 Page 2 of 5 Output Specifications Parameter Conditions Min. Typ. Max. Unit Output Voltage Accuracy --- ±2.0 --- %Vom. Line Regulation Vin=Min. to Max. @Full Load --- ±0.5 --- % Load Regulation Io=0% to 100% Single Output Model --- ±1.0 --- % Dual Output Models --- ±2.0 --- % Minimum Load No minimum Load Requirement Ripple & Noise(3) 0-20 MHz Bandwidth 5V Output Models --- 1.5 1.8 %VPP of Vo Other Output Models --- 1.0 1.3 %VPP of Vo Over Voltage Protection Zener diode clamp --- 120 --- % of Vo Temperature Coefficient --- ±0.02 --- %/℃ Overshoot --- --- 5 % Current Limitation 85VAC, Hiccup Mode, auto-recovery 105 --- --- % Inom. (long term overload condition may cause damage) Short Circuit Protection Hiccup mode, indefinite (Automatic Recovery) General Specifications Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage Reinforced Insulation, Rated For 60 Seconds 4000 --- --- VACrms Leakage Current --- 80 --- μA I/O Isolation Resistance 500 VDC 1000 --- --- MΩ Switching Frequency --- 130 --- KHz Hold-up Time 115VAC, 60Hz --- 25 --- ms 230VAC, 50Hz --- 80 --- ms MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign 200,000 Hours Protection Class II According IEC/EN 60536 Safety Approvals IEC/EN 60950-1 CB Report, UL/cUL 60950-1, CSA-C22.2 No.60950-1, UL508 listed certificate IEC/EN 60601-1 3rd Edition CB Report, ANSI/AAMI ES60601-1 2XMOPP, CAN/CSA-C22.2 No.60601-1 certificate EMC Specifications Parameter Standards & Level Performance EMI Conduction EN55011, EN55022, EN61000-6-4, EN61000-6-3, FCC part 15 Class B Radiation EMS EN60601-1-2, EN55024, EN61000-6-2, EN61000-6-1 ESD EN61000-4-2 Air ± 8kV , Contact ± 4kV A Radiated immunity EN61000-4-3 10V/m A Fast transient EN61000-4-4 ±2kV A Surge EN61000-4-5 ±1kV A Conducted immunity EN61000-4-6 10Vrms A PFMF EN61000-4-8 30A/m A Dips EN61000-4-11 30% 10ms A Interruptions EN61000-4-11 >95% 5000ms B Environmental Specifications Parameter Conditions Min. Max. Temperature Range (operational) Ambient -40℃ +80℃ Power Derating Above +60℃ 1.5W / ℃ Storage Temperature Range -40℃ +95℃ Over Temperature Protection Shutdown at 90℃ (automatic recovery at approx. 67℃) Humidity (non condensing) --- 95% rel. H Cooling Natural Convection Lead Temperature (1.5mm from case for 10Sec.) --- 260℃

AC/DC Power Module 40W, Industrial & Medical Safety E-mail:sales@minmax.com.tw Tel:886 -6-2923150 2015/05/22 REV:2 Page 3 of 5 Notes 1 This product is not designed for use in critical life support systems, equipment used in hazardous environment, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 2 Specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage, after warm-up time rated output current unless otherwise noted. 3 Ripple & Noise measured with a 0.1μF/50V MLCC and a 1μF/50V Aluminum electrolytic. 4 Safety approvals cover frequency 47-63 Hz. 5 We recommend to protect the converter by a slow blow fuse in the input supply line. 6 Other input and output voltage may be available, please contact factory. 7 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 8 Specifications are subject to change without notice. Package Specifications PCB Mounting Mechanical Dimensions Pin Connections Pin Single Output Dual Output

1 AC (N) AC (N)

2 AC (L) AC (L)

4 No Pin No Pin

6 No Pin No Pin

7 NC -Vout

NC: No Connection ►All dimensions in mm (inches) ►Tolerance: ±0.5 (±0.02) ►Pin diameter  1.0 ±0.1 (0.04±0.004) Physical Characteristics Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 310g 31.6 [1.24] 55.88 [2.20] 63.5 [2.50] 81.3 [3.20] 88.9 [3.50] 15.24 12.7 7 6 5 4 3 5.0 30.06.0 1.0 [0.60] [0.50] 12.7 [0.50] 15.24 [0.60] [0.24] [1.18] 0.7 [0.03] [ 0.04] [0.20] Mounting M4.0 Thread Bottom View 15.9 [0.63] 53.3 [2.10]

AC/DC Power Module 40W, Industrial & Medical Safety E-mail:sales@minmax.com.tw Tel:886 -6-2923150 2015/05/22 REV:2 Page 4 of 5 Package Specifications Chassis Mounting (order code suffix C) Mechanical Dimensions Connections Pin Single Output Dual Output

4 NC NC

6 NC NC

NC: No Connection ►All dimensions in mm (inches) ►Tolerance: ±0.5 (±0.02) Physical Characteristics Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 320g Package Specifications with DIN Rail Mounting Bracket Mechanical Dimensions Physical Characteristics Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 374g 92.0 [3.62] 100.0 [3.94] 112.0 [4.41] 63.8 [2.51] 50.0 [1.97] 4 x 3.5 Top view 10.0 [0.39] POWER "GOOD" INDICATOR Indication LED DC- ON 5.0 [0.20] 16.8 [0.66] 34.1 [1.34] 92.0 [3.62] 100.0 [3.94] 112.0 [4.41] 63.8 [2.51] 50.0 [1.97] 4 x 3.5 Top view 10.0 [0.39] POWER "GOOD" INDICATOR Indication LED DC- ON 16.8 [0.66] 3.0 [0.12] 5.0 [0.20]

AC/DC Power Module 40W, Industrial & Medical Safety Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886 -6-2923149 E -mail: sales@minmax.com.tw 2015/05/22 REV:2 Page 5 of 5 DIN-Rail Mounting Bracket (Order code for Kit : AC-DIN-02) Order Code Table PCB Mounting Chassis Mounting With DIN Rail Mounting by two Order Code APM-40S05 APM-40S05C APM-40S05C AC-DIN-02 APM-40S12 APM-40S12C APM-40S12C AC-DIN-02 APM-40S15 APM-40S15C APM-40S15C AC-DIN-02 APM-40S24 APM-40S24C APM-40S24C AC-DIN-02 APM-40D12 APM-40D12C APM-40D12C AC-DIN-02 APM-40D15 APM-40D15C APM-40D15C AC-DIN-02 APM-40S05 APM-40S05C APM-40S05C AC-DIN-02