APL501J ADPOW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

STATIC ELECTRICAL CHARACTERISTICS MAXIMUM RATINGS All Ratings: TC = 25°C unless otherwise specified. CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. SOT-227 G S S D "UL Recognized" File No. E145592 (S) APL501J 500V 43.0A 0.12 W SINGLE DIE ISOTOP ® PACKAGE ISOTOP ® N- CHANNEL ENHANCEMENT MODE HIGH VOLTAGE POWER MOSFETS POWER MOS IV ® G D S 050-5903 Rev C 9-2001 Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25°C Pulsed Drain Current 1 and Inductive Current Clamped Gate-Source Voltage Total Power Dissipation @ TC = 25°C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. APL501J 500 172 ±30 520 4.16 -55 to 150 300 Characteristic / Test Conditions / Part Number Drain-Source Breakdown Voltage (VGS = 0V, ID = 250 µA) On State Drain Current 2 (VDS > ID (ON) x RDS (ON) Max, VGS = 8V) Drain-Source On-State Resistance 2 (VGS = 10V, 0.5 ID [Cont.]) Zero Gate Voltage Drain Current (VDS = VDSS , VGS = 0V) Zero Gate Voltage Drain Current (VDS = 0.8 VDSS , VGS = 0V, TC = 125°C) Gate-Source Leakage Current (VGS = ±30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS , ID = 2.5mA) MIN TYP MAX 500 0.12 250 ±100 UNIT Volts Amps Volts Watts W/°C UNIT Volts Amps Ohms µA nA Volts Symbol VDSS ID IDM , lLM VGS PD TJ,TSTG TL Symbol BV DSS ID (ON) R DS (ON) IDSS IGSS VGS (TH) USA 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364 EUROPE Chemin de Magret F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 APT Website - http://www.advancedpower.com THERMAL CHARACTERISTICS Symbol RQJC RQCS Characteristic Junction to Case Case to Sink (Use High Efficiency Thermal Joint Compound and Planer Heat Sink Surface.) MIN TYP MAX 0.24 0.06 UNIT °C/W

DYNAMIC CHARACTERISTICS APL501J 1 Repetitive Rating: Pulse width limited by maximum junction temperature. See Transient Thermal Impedance Curve. (Fig.1)

2 Pulse Test: Pulse width < 380 µS, Duty Cycle < 2%

3 See MIL-STD-750 Method 3471

10-5 10-4 10-3 10-2 10-1 1.0 10 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION 0.3 0.1 0.05 0.01 0.005 0.001 ZqJC, THERMAL IMPEDANCE (°C/W) Note: Duty Factor D = t1/t2 Peak TJ = PDM x ZθJC + TC PDM SINGLE PULSE 0.01 0.02 0.05 0.1 0.2 D=0.5 SAFE OPERATING AREA CHARACTERISTICS Test Conditions / Part Number VDS = 400 V, IDS = 0.813A, t = 20 sec., TC = 60°C Watts 050-5903 Rev C 9-2001 Symbol C iss C oss C rss td(on) tr td(off) tf MIN TYP MAX 6040 7300 1220 1710 510 770 13 26 20 40 54 81 11 20 UNIT pF ns Symbol SOA1 MIN TYP MAX 325 UNITCharacteristic Safe Operating Area Test Conditions VGS = 0V VDS = 25V f = 1 MHz VGS = 15V VDD = 0.5 VDSS ID = ID [Cont.] @ 25°C R G = 0.6W Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time ID , DRAIN CURRENT (AMPERES) ID , DRAIN CURRENT (AMPERES) 02 04 06 08 0 1 0 0 0 4 8 1 2 1 6 V DS , DRAIN-TO-SOURCE VOLTAGE (VOLTS) V DS , DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 2, TYPICAL OUTPUT CHARACTERISTICS FIGURE 3, TYPICAL OUTPUT CHARACTERISTICS 8 V 6 V 7 V VGS =9V, 10V, 12V, 14 & 16V 5 V 8 V 6 V 7 V 5 V

9 V VGS =10, 12, 14 & 16V

APT's devices are covered by one or more of the following U.S.patents:4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 SOT-227 (ISOTOP® ) Package Outline 31.5 (1.240) 31.7 (1.248) Dimensions in Millimeters and (Inches) 7.8 (.307) 8.2 (.322) 30.1 (1.185) 30.3 (1.193) 38.0 (1.496) 38.2 (1.504) 14.9 (.587) 15.1 (.594) 11.8 (.463) 12.2 (.480) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) 0.75 (.030) 0.85 (.033) 12.6 (.496) 12.8 (.504) 25.2 (0.992) 25.4 (1.000) 1.95 (.077) 2.14 (.084) * Source Drain Gate r = 4.0 (.157) (2 places) 4.0 (.157) 4.2 (.165) (2 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 3.3 (.129) 3.6 (.143) * Source Source terminals are shorted internally. Current handling capability is equal for either Source terminal. ISOTOP ® is a Registered Trademark of SGS Thomson. "UL Recognized" File No. E145592 APL501J 050-5903 Rev C 9-2001