APHH1005RWF

APHH1005RWF_07 KINGBRIGHT | Alldatasheet

Document overview

• Manufacturer or author: fangdh
• PDF pages: 7

Technical content

Features

z1.0mmx0.5mm SMT LED, 0.7mm THICKNESS. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zPACKAGE: 2000PCS / REEL . z ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. z TYP. COLOR TEMPERATURE:6500K z COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). z OPTICAL EFFICIENCY: 12.9 lm/W(TYP.) z COLOR REPRODUCTION INDEX:80 zRoHS COMPLIANT. Package Dimensions Part Number: APHH1005RWF/A WHITE

Description

The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.

Applications

ztraffic signaling. zbacklighting (illuminated advertising , general lighting). zinterior and exterior automotive lighting. zsubstitution of micro incandescent lamps. zreading lamps. zsignal and symbol luminaire for orientation. zmarker lights (e.g. steps, exit ways, etc). zdecorative and entertainment lighting. zindoor and outdoor commercial and residential architectural lighting. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES PRELIMINARY SPEC Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAG6504 REV NO: V.2 DATE:JUN/04/2007 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:Y.L.LI ERP: 1203005570 Selection Guide Parameter Symbol Value Unit Power dissipation Pt 120 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C DC Forward Current IF 30 mA Peak Forward Current Note4 IFM 100 mA Thermal resistance Junction/ambient Note5 Junction/solder point Rth JA Rth JS 280 160 °C/W Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Note1 0.31 - Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 0.31 - Forward Voltage IF=20mA [Min.] VF Note2 2.7 V Forward Voltage IF=20mA [Typ.] 3.2 Forward Voltage IF=20mA [Max.] 4.0 Reverse Current (VR=5V) [Typ.] IR 0.01 μA Reverse Current (VR=5V) [Max.] 10 Temperature coefficient of x IF=20mA, -10°C≤ T≤100°C [Typ.] TC x -0.1 10-3 /°C Temperature coefficient of y IF=20mA, -10°C≤ T≤100°C [Typ.] TCy -0.2 10-3 /°C Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C [Typ.] TCV -2.5 mV/°C Part No. Dice Lens Type luminous IntensityNote2 Iv(mcd) @ 20 mA Φv (mlm) Note3 @ 20 mA Viewing Angle Note1 Min. Typ. Typ. 2θ1/2 APHH1005RWF/A WHITE (InGaN) YELLOW FLUORESCENT 70 140 850 170° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from m ounting on PC board FR4 (pad size ≥16 mm 2 per pad), Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a curr ent pulse of 10ms at a tolerance of ±0.1V.

SPEC NO: DSAG6504 REV NO: V.2 DATE:JUN/04/2007 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:Y.L.LI ERP: 1203005570 White APHH1005RWF/A Brightness codes Φv (mlm) Note2 @ 20 mA Code. Min. Max. Typ. M 70 130 400 N 110 220 600 P 180 320 750 Q 280 420 920 luminous Intensity Note1 Iv(mcd) @ 20 mA Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice.

SPEC NO: DSAG6504 REV NO: V.2 DATE:JUN/04/2007 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:Y.L.LI ERP: 1203005570 APHH1005RWF/A

SPEC NO: DSAG6504 REV NO: V.2 DATE:JUN/04/2007 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:Y.L.LI ERP: 1203005570 APHH1005RWF/A 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 b3 b1 b4 c0 a0 a1 Reference CCT: 14000~9000k Reference CCT: 14000~9000k b1 b2 Reference CCT: 9000~5600k Reference CCT: 9000~5600k b3 b4 Reference CCT: 9000~7000k Reference CCT: 7600~5600k c0 c1 Reference CCT: 5600~4600k Reference CCT: 6000~4600k White CIE

SPEC NO: DSAG6504 REV NO: V.2 DATE:JUN/04/2007 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:Y.L.LI ERP: 1203005570 Tape Specifications (Units : mm) APHH1005RWF/A Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Reel Dimension

SPEC NO: DSAG6504 REV NO: V.2 DATE:JUN/04/2007 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:Y.L.LI ERP: 1203005570 PACKING & LABEL SPECIFICATIONS APHH1005RWF/A