APHBM2012SURKZGKC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

© 2017 Kingbright. All Rights Reserved. Spec No: DSAN5534 / 1203014012 Rev No: V.2A Date: 07/13/2017 Page 1 / 4 Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 20mA [2] Viewing Angle [1] Min. Typ. 2θ1/2 APHBM2012SURKZGKC ■ Hyper Red (AlGaInP) Water Clear 120 250 *40 *80 ■ Green (InGaN) 200 280 *200 *280 120° DESCRIPTIONS z The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode z The Green source color devices are made with InGaN on Sapphire Light Emitting Diode z Electrostatic discharge and power surge could damage the LEDs z It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs z All devices, equipments and machineries must be electrically grounded

FEATURES

z 2.0 mm x 1.25 mm SMD LED, 0.45 mm max. thickness z Low power consumption z Wide viewing angle z Ideal for backlight and indicator z Package: 2000 pcs / reel z Moisture sensitivity level: 3 z RoHS compliant

APPLICATIONS

z Home and smart appliances z Wearable and portable devices z Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS SELECTION GUIDE Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. APHBM2012SURKZGKC 2.0 x 1.25 mm SMD Chip LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

© 2017 Kingbright. All Rights Reserved. Spec No: DSAN5534 / 1203014012 Rev No: V.2A Date: 07/13/2017 Page 2 / 4 ABSOLUTE MAXIMUM RATINGS at TA=25°C ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C APHBM2012SURKZGKC Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Parameter Symbol Emitting Color Value Unit Typ. Max. Wavelength at Peak Emission IF = 20mA λpeak Hyper Red Green 645 515 - nm Dominant Wavelength IF = 20mA λdom [1] Hyper Red Green 630 525 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Hyper Red Green - nm Capacitance C Hyper Red Green - pF Forward Voltage IF = 20mA VF [2] Hyper Red Green 1.95 3.3 2.5 4.1 V Reverse Current (VR = 5V) IR Hyper Red Green - 10 uA Temperature Coefficient of λpeak IF = 20mA, -10°C ≤ T ≤ 85°C TCλpeak Hyper Red Green 0.14 0.05 - nm/°C Temperature Coefficient of λdom IF = 20mA, -10°C ≤ T ≤ 85°C TCλdom Hyper Red Green 0.05 0.03 - nm/°C Temperature Coefficient of VF IF = 20mA, -10°C ≤ T ≤ 85°C TCV Hyper Red Green -1.9 -3.0 - mV/°C Parameter Symbol Value Unit Hyper Red Green Power Dissipation PD 75 102.5 mW Reverse Voltage VR 5 5 V Junction Temperature TJ 115 115 °C Operating Temperature Top -40 to +85 °C Storage Temperature Tstg -40 to +85 °C DC Forward Current IF 30 25 mA Peak Forward Current IFM [1] 185 150 mA Electrostatic Discharge Threshold (HBM) - 3000 450 V Thermal Resistance (Junction / Ambient) Rth JA [2] 560 560 °C/W Thermal Resistance (Junction / Solder point) Rth JS [2] 425 450 °C/W

© 2017 Kingbright. All Rights Reserved. Spec No: DSAN5534 / 1203014012 Rev No: V.2A Date: 07/13/2017 Page 3 / 4 TECHNICAL DATA 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 T a = 25 °C Red Wavelength (nm) Relative Intensity (a. u.) Green RELATIVE INTENSITY vs. WAVELENGTH HYPER RED 0.5 0.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C SPATIAL DISTRIBUTION APHBM2012SURKZGKC GREEN Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 0 1 02 03 04 05 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at Ta = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 0 1 02 03 04 05 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at Ta = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature

© 2017 Kingbright. All Rights Reserved. Spec No: DSAN5534 / 1203014012 Rev No: V.2A Date: 07/13/2017 Page 4 / 4 APHBM2012SURKZGKC TECHNICAL DATA TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) PACKING & LABEL SPECIFICATIONS REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference on ly. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application ha s special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes