APHB1608LSYKSURKC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

z 1.6mmX0.8mm SMD LED, 0.5mm thickness. z Compatible with reflow soldering. z Available in various color combination. z Package: 2000pcs / reel . z Moisture sensitivity level : level 3. z Tinned pads for improved solderability. z Low current IF=2mA operating. z RoHS compliant. Descriptions z The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip. z The Hyper Red source color devices are made with Al GaInP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAO5241 REV NO: V.2A DATE: SEP/25/2015 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203015222 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 2mA Viewing Angle [1] Min. Typ. 2 θ1/2 APHB1608LSYKSURKC Water Clear 6 10 130° *6 *10 Hyper Red (AlGaInP) 10 20 *2 *8 Super Bright Yellow (AlGaInP) Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Super Bright Yellow Hyper Red 590 645 nm I F=2mA λD [1] Dominant Wavelength Super Bright Yellow Hyper Red 590 630 nm I F=2mA Δλ1/2 Spectral Line Half-width Super Bright Yellow Hyper Red 28 nm I F=2mA C Capacitance Super Bright Yellow Hyper Red 35 pF V F=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow Hyper Red 1.85 1.75 2.1

2.1 V I F=2mA

IR Reverse Current Super Bright Yellow Hyper Red 10 10 uA V R = 5V Min. 1.5 1.5 Parameter Super Bright Yellow Hyper Red Units Power dissipation 63 63 mW DC Forward Current 30 30 mA Peak Forward Current [1] 175 185 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.

SPEC NO: DSAO5241 REV NO: V.2A DATE: SEP/25/2015 PAGE: 3 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203015222 APHB1608LSYKSURKC Super Bright Yellow

SPEC NO: DSAO5241 REV NO: V.2A DATE: SEP/25/2015 PAGE: 4 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203015222 Hyper Red

SPEC NO: DSAO5241 REV NO: V.2A DATE: SEP/25/2015 PAGE: 5 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203015222 APHB1608LSYKSURKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm)

SPEC NO: DSAO5241 REV NO: V.2A DATE: SEP/25/2015 PAGE: 6 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203015222 PACKING & LABEL SPECIFICATIONS APHB1608LSYKSURKC Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes