APHB1608G2R2C-AMT KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1752 / 1203012133 Rev No: V.2A Date: 03/22/2023 Page 1 / 6 DESCRIPTIONS  The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode  The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode  Electrostatic discharge and power surge could damage the LEDs  It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs  All devices, equipments and machineries must be electrically grounded

FEATURES

 1.6 x 0.8 mm SMD LED, 0.5 mm thickness  Compatible with reflow soldering  Available in various color combination  Package: 2000 pcs / reel  Moisture sensitivity level: 3  Tinned pads for improved solderability  Halogen-free  RoHS compliant

APPLICATIONS

 Traffic signaling  Backlighting (illuminated advertising , general lighting)  Interior and exterior automotive lighting  Substitution of micro incandescent lamps   Reading lamps  Signal and symbol luminaire for orientation  Marker lights (e.g. Steps, exit ways, etc)  Decorative and entertainment lighting  Indoor and outdoor commercial and residential architectural lighting ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS APHB1608G2R2C-AMT 1.6 x 0.8 x 0.5 mm Bi-Color Surface Mount LED Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1)

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1752 / 1203012133 Rev No: V.2A Date: 03/22/2023 Page 2 / 6 SELECTION GUIDE Part Number Emitting Color (Material) Iv (mcd) @ 20mA [2] Lens Type Viewing Angle [1] Code. Min. Max. 2θ1/2 APHB1608G2R2C-AMT ■ Green (AlGaInP) F 20 40 Water Clear 130° G 40 55 H 55 80 *F *20 *40 *G *40 *55 *H *55 *80 ■ Hyper Red (AlGaInP) N 120 200 P 200 300 Q 300 400 *G *40 *55 *H *55 *80 *M *80 *120 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. 3. LEDs will be provided from the listed bin codes. The bins delivered to the customer will be at Kingbright's discretion. ABSOLUTE MAXIMUM RATINGS at TA=25°C Parameter Symbol Value Unit Green Hyper Red Power Dissipation PD 75 mW Reverse Voltage VR 5 5 V Junction Temperature Tj 115 115 °C Operating Temperature Top -40 to +100 °C Storage Temperature Tstg °C DC Forward Current IF 30 30 mA Peak Forward Current IFM [1] 150 185 mA Electrostatic Discharge Threshold (HBM) - 3000 3000 V Thermal Resistance (Junction / Ambient) Rth JA [2] 480 640 °C/W Thermal Resistance (Junction / Solder point) Rth JS [2] 350 490 °C/W -40 to +115 Notes: 1. 1/10 Duty Cycle , 0.1ms Pulse Width . 2. Rth JA, Rth JS Results from mounting on PC board FR4 (pad size ≥16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. APHB1608G2R2C-AMT

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1752 / 1203012133 Rev No: V.2A Date: 03/22/2023 Page 3 / 6 APHB1608G2R2C-AMT ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Emitting Color Value Unit Code. Min. Typ. Max. Wavelength at Peak Emission IF = 20mA λpeak Green Hyper Red - - 574 645 - nm Dominant Wavelength IF = 20mA λdom [1] 4 565 - 567 nm 5 567 - 569 6 569 - 571 7 571 - 573 Hyper Red - 620 - 640 Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Green Hyper Red - - 20 - nm Capacitance C Green Hyper Red - - 15 - pF Forward Voltage IF = 20mA VF [2] Green Hyper Red - - 2.1 1.95 2.5 2.5 V Reverse Current (VR = 5V) IR Green Hyper Red - - - 10 µA Temperature Coefficient of λpeak IF = 20mA, -10°C ≤ T ≤ 100°C TCλpeak Green Hyper Red - - 0.12 0.14 - nm/°C Temperature Coefficient of λdom IF = 20mA, -10°C ≤ T ≤ 100°C TCλdom Green Hyper Red - - 0.08 0.05 - nm/°C Temperature Coefficient of VF IF = 20mA, -10°C ≤ T ≤ 100°C TCV Green Hyper Red - - -1.9 -1.9 - mV/°C Green Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. 5. LEDs will be provided from the listed bin codes. The bins delivered to the customer will be at Kingbright's discretion. 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 T a = 25 °C Green Red Wavelength (nm) Relative Intensity (a. u.) RELATIVE INTENSITY vs. WAVELENGTH 0.5 0.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C SPATIAL DISTRIBUTION TECHNICAL DATA

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1752 / 1203012133 Rev No: V.2A Date: 03/22/2023 Page 4 / 6 APHB1608G2R2C-AMT GREEN HYPER RED 0.1 100 Ta = 25 °C Forward voltage (V) Forward current (mA) 0.01 0.1 1 10 100 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Luminous intensity normalised at T a = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature 0.1 100 Ta = 25 °C Forward voltage (V) Forward current (mA) 0.01 0.1 1 10 100 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Luminous intensity normalised at T a = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. TECHNICAL DATA

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1752 / 1203012133 Rev No: V.2A Date: 03/22/2023 Page 5 / 6 APHB1608G2R2C-AMT Items Symbols Conditions Failure Criteria luminous Intensity lV IF = 20mA Testing Min. Value < Spec. Min. Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value ≥ Spec. Max. Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥ Spec. Max. Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking CRITERIA FOR JUDGING DAMAGE RELIABILITY TEST ITEMS AND CONDITIONS The reliability of products shall be satisfied with items listed below LOT TOLERANCE PERCENT DEFECTIVE (LTPD) : 10% No. Test Item Standards Test Condition Test Times / Cycles Number of Damaged

1 Continuous operating test - Ta = 25°C, IF = maximum rated current * 1,000 h 0 / 22

2 High Temp. operating test EIAJ ED-4701/100(101) Ta = 100°C, IF = maximum rated current * 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40°C, IF = maximum rated current * 1,000 h 0 / 22 4 High temp. storage test EIAJ ED-4701/100(201) Ta = maximum rated storage temperature 1,000 h 0 / 22 5 Low temp. storage test EIAJ ED-4701/100(202) Ta = -40°C 1,000 h 0 / 22 6 High temp. & humidity storage test EIAJ ED-4701/100(103) Ta = 60°C, RH = 90% 1,000 h 0 / 22 7 High temp. & humidity operating test EIAJ ED-4701/100(102) Ta = 60°C, RH = 90% IF = maximum rated current * 1,000 h 0 / 22

8 Soldering reliability test EIAJ ED-4701/100(301)

Moisture soak: 30°C, 70% RH, 72h Preheat: 150~180°C (120s max.) Soldering temp: 260°C(10s) 2 times 0 / 18

9 Thermal shock operating test - Ta = -40°C(15min) ~ 100°C(15min)

IF = derated current at 100°C 1,000 cycles 0 / 22

10 Thermal shock test - Ta = -40°C(15min) ~ maximum rated

Storage temperature(15min) 1,000 cycles 0 / 22 11 Electric Static Discharge (ESD) EIAJ ED-4701/100(304) C = 100pF, R2 = 1.5KΩ V = 3000V (Green) V = 3000V (Red) Once each Polarity 0 / 22

12 Vibration test - a = 196m/s², f = 100~2KHz, t = 48min for all xyz axes 4 times 0 / 22

  • : Refer to forward current vs. derating curve diagram

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1752 / 1203012133 Rev No: V.2A Date: 03/22/2023 Page 6 / 6 APHB1608G2R2C-AMT PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects represent ative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without n otice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmenta l and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application h as special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be rep roduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright applicati on notes available at https://www.KingbrightUSA.com/ApplicationNotes