APHB1608CGKSYKC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

z 1.6mmX0.8mm SMD LED, 0.5mm thickness. z Compatible with reflow soldering. z Available in various color combination. z Package: 2000pcs / reel . z Moisture sensitivity level : level 3. z Tinned pads for improved solderability. z RoHS compliant. Descriptions z The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. z The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip. z Electrostatic discharge and power surge could damage the LEDs. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipment and machinery must be electri cally grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES

SPEC NO: DSAL1456 REV NO: V.8B DATE: DEC/06/2016 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203011475 Selection Guide Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2 θ1/2 APHB1608CGKSYKC Green (AlGaInP) Water Clear 20 50 Super Bright Yellow (AlGaInP) 80 150 130° Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Green Super Bright Yellow 574 590 nm I F=20mA λD [1] Dominant Wavelength Green Super Bright Yellow 570 590 nm I F=20mA Δλ1/2 Spectral Line Half-width Green Super Bright Yellow 20 nm I F=20mA C Capacitance Green Super Bright Yellow 20 pF V F=0V;f=1MHz VF [2] Forward Voltage Green Super Bright Yellow 2.1 2.5

2.5 V I F=20mA

10 uA V R = 5V Parameter Green Super Bright Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 150 175 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards.

SPEC NO: DSAL1456 REV NO: V.8B DATE: DEC/06/2016 PAGE: 3 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203011475 APHB1608CGKSYKC Green

SPEC NO: DSAL1456 REV NO: V.8B DATE: DEC/06/2016 PAGE: 4 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203011475 Super Bright Yellow

SPEC NO: DSAL1456 REV NO: V.8B DATE: DEC/06/2016 PAGE: 5 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203011475 APHB1608CGKSYKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm)

SPEC NO: DSAL1456 REV NO: V.8B DATE: DEC/06/2016 PAGE: 6 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1203011475 PACKING & LABEL SPECIFICATIONS APHB1608CGKSYKC Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specificatio ns mentioned in this document are subjec t to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer us age exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes