APH1608RWF_07 KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: developspec1
  • PDF pages: 7

Technical content

Features

  • 1.6mmX0.8mm SMT LED, 0.65mm THICKNESS.
  • LOW POWER CONSUMPTION.
  • WIDE VIEWING ANGLE.
  • IDEAL FOR BACKLIGHT AND INDICATOR.
  • PACKAGE: 2000PCS / REEL . zMOISTURE SENSITIVITY LEVEL : LEVEL 3. z ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. z TYP. COLOR TEMPERATURE:6500K z COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). z OPTICAL EFFICIENCY:7.9 lm/W(TYP.) z COLOR REPRODUCTION INDEX:80 zRoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APH1608RWF/A WHITE

Description

The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. PRELIMINARY SPEC Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications.

Applications

ztraffic signaling. zbacklighting (illuminated advertising , general lighting). zinterior and exterior automotive lighting. zsubstitution of micro incandescent lamps. zreading lamps. zsignal and symbol luminaire for orientation. zmarker lights (e.g. steps, exit ways, etc). zdecorative and entertainment lighting. zindoor and outdoor commercial and residential architectural lighting.

SPEC NO: DSAG3635 REV NO: V.6 DATE: JUN/29/2007 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP: 120 3005370 Selection Guide Parameter Symbol Value Unit Power dissipation Pt 114 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C DC Forward Current IF 30 mA Peak Forward Current Note4 IFM 100 mA Thermal resistance Junction/ambient Note5 Junction/solder point Rth JA Rth JS 400 150 °C/W °C/W Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Note1 0.31 - Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 0.31 - Forward Voltage IF=20mA [Min.] VF Note2 2.7 V Forward Voltage IF=20mA [Typ.] 3.3 Forward Voltage IF=20mA [Max.] 3.8 Reverse Current (VR=5V) [Typ.] IR 0.01 μA Reverse Current (VR=5V) [Max.] 10 Temperature coefficient of x IF=20mA, -10°C≤ T≤100°C [Typ.] TC x -0.1 10-3 /°C Temperature coefficient of y IF=20mA, -10°C≤ T≤100°C [Typ.] TCy -0.2 10-3 /°C Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C [Typ.] TCV -2.5 mV/°C Part No. Dice Lens Type luminous IntensityNote2 Iv(mcd) @ 20 mA Φv (mlm) Note3 @ 20 mA Viewing Angle Note1 Min. Typ. Typ. 2θ1/2 APH1608RWF/A WHITE (InGaN) YELLOW FLUORESCENT 70 140 520 150° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from m ounting on PC board FR4 (pad size ≥16 mm 2 per pad), Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a curr ent pulse of 10ms at a tolerance of ±0.1V.

SPEC NO: DSAG3635 REV NO: V.6 DATE: JUN/29/2007 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP: 120 3005370 White APH1608RWF/A Brightness codes Φv (mlm) Note2 @ 20 mA Code. Min. Max. Typ. M 70 130 300 N 110 220 480 P 180 320 710 Q 280 420 960 luminous Intensity Note1 Iv(mcd) @ 20 mA Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice.

SPEC NO: DSAG3635 REV NO: V.6 DATE: JUN/29/2007 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP: 120 3005370 APH1608RWF/A

SPEC NO: DSAG3635 REV NO: V.6 DATE: JUN/29/2007 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP: 120 3005370 Color Codes White CIE 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 a0 a1 b1 Reference CCT: 14000~9000k Reference CCT: 14000~9000k Reference CCT: 9000~5600k b2 b3 b4 Reference CCT: 9000~5600k Reference CCT: 9000~7000k Reference CCT: 7600~5600k c0 c1 Reference CCT: 5600~4600k Reference CCT: 6000~4600k b3 b1 b4 c0

SPEC NO: DSAG3635 REV NO: V.6 DATE: JUN/29/2007 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP: 120 3005370 Tape Specifications (Units : mm) APH1608RWF/A Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Reel Dimension

SPEC NO: DSAG3635 REV NO: V.6 DATE: JUN/29/2007 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP: 120 3005370 PACKING & LABEL SPECIFICATIONS APH1608RWF/A