APG0603PBC-TT-5MAV

APG0603PBC-TT-5MAV KINGBRIGHT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

z 0.65mmX0.35mm SMD LED,0.2mm thickness z Low power consumption. z Wide viewing angle. z Compatible with automatic placement equipment. z Package: 4000pcs / reel. z Moisture sensitivity level : level 2. z Low current IF=5mA operating. z RoHS compliant. Descriptions z The Blue source color devices are made with InGaN on SiC substrate Light Emitting Diode. z Electrostatic discharge and power surge could damage the LEDs. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES

SPEC NO: DSAO2868 REV NO: V.4B DATE: MAY/12/2016 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014331 Selection Guide Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1. 1 / 10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 5mA Viewing Angle [1] Min. Typ. 2 θ1/2 APG0603PBC-TT-5MAV Blue (InGaN) Water Clear 15 25 140° Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Blue 461 nm I F=5mA λD [1] Dominant Wavelength Blue 467 nm I F=5mA Δλ1/2 Spectral Line Half-width Blue 22 nm I F=5mA VF [2] Forward Voltage Blue 2.9 3.1 V I F=5mA IR Reverse Current Blue 50 uA V R=5V Parameter Values Units Power dissipation 32 mW DC Forward Current 10 mA Peak Forward Current [1] 50 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Electrostatic Discharge Threshold (HBM) 1000 V Notes: 1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value. 2. Luminous intensity / luminous Flux: + / -15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Notes: 1. Wavelength: + / -1nm. 2. Forward Voltage: + / -0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.

SPEC NO: DSAO2868 REV NO: V.4B DATE: MAY/12/2016 PAGE: 3 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014331 Blue APG0603PBC-TT-5MAV -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90°0.0 0.2 0.4 0.6 0.8 1.0 Ta = 25 °C Spatial Distribution

SPEC NO: DSAO2868 REV NO: V.4B DATE: MAY/12/2016 PAGE: 4 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014331 APG0603PBC-TT-5MAV Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) Reel Dimension

SPEC NO: DSAO2868 REV NO: V.4B DATE: MAY/12/2016 PAGE: 5 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014331 PACKING & LABEL SPECIFICATIONS APG0603PBC-TT-5MAV Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes