APG0603CGC-TT KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

z 0.65mmX0.35mm SMD LED,0.2mm thickness. z Low power consumption. z Wide viewing angle. z Compatible with automatic placement equipment. z Package:4000pcs/reel. z Moisture sensitivity level : level 2. z RoHS compliant.

Description

The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAO2861 REV NO: V.4B DATE: MAY/12/2016 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014742 Selection Guide Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1. 1 / 10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Part No. Emitting Color (Material) Lens Type Viewing Angle [1] Min. Typ. 2 θ1/2 APG0603CGC-TT Green (AlGaInP) Water Clear 6 15 140° Iv (mcd) [2] @ 10mA Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Green 572 nm I F=10mA λD [1] Dominant Wavelength Green 571 nm I F=10mA Δλ1/2 Spectral Line Half-width Green 20 nm I F=10mA VF [2] Forward Voltage Green 1.97 2.4 V I F=10mA IR Reverse Current Green 10 uA V R=5V Parameter Values Units Power dissipation 48 mW DC Forward Current 20 mA Peak Forward Current [1] 100 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value. 2. Luminous intensity / luminous Flux: + / -15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Notes: 1. Wavelength: + / -1nm. 2. Forward Voltage: + / -0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.

SPEC NO: DSAO2861 REV NO: V.4B DATE: MAY/12/2016 PAGE: 3 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014742 Green APG0603CGC-TT -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90°0.0 0.2 0.4 0.6 0.8 1.0 Ta = 25 °C Spatial Distribution

SPEC NO: DSAO2861 REV NO: V.4B DATE: MAY/12/2016 PAGE: 4 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014742 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) APG0603CGC-TT Tape Dimensions (Units : mm) Reel Dimension

SPEC NO: DSAO2861 REV NO: V.4B DATE: MAY/12/2016 PAGE: 5 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203014742 PACKING & LABEL SPECIFICATIONS APG0603CGC-TT Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes