APFA3010SURKZGSYKC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

z 3.0x1.5x1.0mm right angle SMD LED, 1.0mm thick- ness. z Low power consumption. z Wide viewing angle. z Ideal for backlight and indicator. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z Tinned pads for improved solderability. z RoHS compliant. Descriptions z The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. z The Green source color devices are made with InGaN on Sapphire Light Emitting Diode. z The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip. z Electrostatic discharge and power surge could damage the LEDs. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. Green Yellow Red

SPEC NO: DSAI9094 REV NO: V.6A DATE: DEC/09/2015 PAGE: 2 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203008730 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2 θ1/2 APFA3010SURKZGSYKC Hyper Red (AlGaInP) Water Clear 120 220 120° *55 *80 Green (InGaN) 200 400 *200 *400 120 180 *120 *180 Super Bright Yellow (AlGaInP) Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red Green Super Bright Yellow 645 515 590 nm I F=20mA λD [1] Dominant Wavelength Hyper Red Green Super Bright Yellow 630 525 590 nm I F=20mA Δλ1/2 Spectral Line Half-width Hyper Red Green Super Bright Yellow nm I F=20mA C Capacitance Hyper Red Green Super Bright Yellow pF V F=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Super Bright Yellow 1.95 3.3 2.5 4.1 2.5 V I F=20mA IR Reverse Current Hyper Red Green Super Bright Yellow uA V R=5V Parameter Hyper Red Green Super Bright Yellow Units Power dissipation 75 102.5 75 mW DC Forward Current 30 25 30 mA Peak Forward Current [1] 185 150 175 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Electrostatic Discharge Threshold (HBM) 3000 450 3000 V

SPEC NO: DSAI9094 REV NO: V.6A DATE: DEC/09/2015 PAGE: 3 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203008730 APFA3010SURKZGSYKC Hyper Red

SPEC NO: DSAI9094 REV NO: V.6A DATE: DEC/09/2015 PAGE: 4 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203008730 Green

SPEC NO: DSAI9094 REV NO: V.6A DATE: DEC/09/2015 PAGE: 5 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203008730 Super Bright Yellow

SPEC NO: DSAI9094 REV NO: V.6A DATE: DEC/09/2015 PAGE: 6 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203008730 APFA3010SURKZGSYKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm)

SPEC NO: DSAI9094 REV NO: V.6A DATE: DEC/09/2015 PAGE: 7 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203008730 Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes PACKING & LABEL SPECIFICATIONS APFA3010SURKZGSYKC