APFA3010SEEZGQBDC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

z 3.0mmx1.5mmx1.0mm right angle SMD LED, 1.0mm thickness. z Low power consumption. z Wide viewing angle. z Ideal for backlight and indicator. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z Tinned pads for improved solderability. z RoHS compliant. Descriptions z The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. z The Green source color devices are made with InGaN on Sapphire Light Emitting Diode. z The Blue source color devices are made with InGaN Light Emitting Diode. z Electrostatic discharge and power surge could damage the LEDs. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAJ4410 REV NO: V.15B DATE: JAN/08/2016 PAGE: 2 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203013228 Selection Guide Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 APFA3010SEEZGQBDC Hyper Red (AlGaInP) Water Clear 80 140 Green (InGaN) 300 500 Blue (InGaN) 40 70 120° Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red Green Blue 630 515 460 nm IF=20mA λD [1] Dominant Wavelength Hyper Red Green Blue 621 525 465 nm IF=20mA Δλ1/2 Spectral Line Half-width Hyper Red Green Blue nm IF=20mA C Capacitance Hyper Red Green Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 3.3 3.3 2.5 4.1 V IF=20mA IR Reverse Current Hyper Red Green Blue uA VR=5V Parameter Hyper Red Green Blue Units Power dissipation 75 102.5 120 mW DC Forward Current 30 25 30 mA Peak Forward Current [1] 195 150 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Electrostatic Discharge Threshold (HBM) 3000 V 450 250 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: + / -15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.

SPEC NO: DSAJ4410 REV NO: V.15B DATE: JAN/08/2016 PAGE: 3 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203013228 APFA3010SEEZGQBDC Hyper Red

SPEC NO: DSAJ4410 REV NO: V.15B DATE: JAN/08/2016 PAGE: 4 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203013228 Green

SPEC NO: DSAJ4410 REV NO: V.15B DATE: JAN/08/2016 PAGE: 5 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203013228 Blue

SPEC NO: DSAJ4410 REV NO: V.15B DATE: JAN/08/2016 PAGE: 6 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203013228 APFA3010SEEZGQBDC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm)

SPEC NO: DSAJ4410 REV NO: V.15B DATE: JAN/08/2016 PAGE: 7 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203013228 PACKING & LABEL SPECIFICATIONS APFA3010SEEZGQBDC Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes