APFA3010R2G2C-C6-AMT KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1754 / 1203013906 Rev No: V.3A Date: 03/22/2023 Page 1 / 5 DESCRIPTIONS The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded
FEATURES
High reliability LED package 3.0 x 1.5 x 1.0 mm right angle SMD LED, 1.0 mm thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000pcs / reel Moisture sensitivity level: 3 Tinned pads for improved solderability Halogen-free RoHS compliant
APPLICATIONS
Traffic signaling Backlighting (illuminated advertising , general lighting) Interior and exterior automotive lighting Substitution of micro incandescent lamps Reading lamps Signal and symbol luminaire for orientation Marker lights (e.g. Steps, exit ways, etc) Decorative and entertainment lighting Indoor and outdoor commercial and residential architectural lighting ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS APFA3010R2G2C-C6-AMT 3.0 x 1.0 mm Right Angle SMD Chip LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. 5. For right angle SMD LEDs, the solder stencil should be at least 5mil in thickness, to prevent poor solder wetting due to insufficient solder paste.
© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1754 / 1203013906 Rev No: V.3A Date: 03/22/2023 Page 2 / 5 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Emitting Color Value Unit Code Min. Typ. Max. Wavelength at Peak Emission IF = 20mA λpeak Hyper Red Green - - 645 574 - nm Dominant Wavelength IF = 20mA λdom [1] Hyper Red - 620 - 640 nm Green 4 565 - 567 5 567 - 569 6 569 - 571 Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Hyper Red Green - - 28 - nm Capacitance C Hyper Red Green - - 35 - pF Forward Voltage IF = 20mA VF [2] Hyper Red Green - - 1.95 2.1 2.5 2.5 V Reverse Current (VR = 5V) IR Hyper Red Green - - - 10 μA nm Temperature Coefficient of λpeak IF = 20mA, -10°C ≤ T ≤ 100°C TCλpeak Hyper Red Green - - 0.14 0.12 - nm/°C Temperature Coefficient of λdom IF = 20mA, -10°C ≤ T ≤ 100°C TCλdom Hyper Red Green - - 0.05 0.08 - nm/°C Temperature Coefficient of VF IF = 20mA, -10°C ≤ T ≤ 100°C TCV Hyper Red Green - - -1.9 -1.9 - mV/°C Part Number Emitting Color (Material) Iv (mcd) @ 20mA [2] Lens Type Viewing Angle [1] Code. Min. Max. 2θ1/2 APFA3010R2G2C-C6-AMT ■ Hyper Red (AlGaInP) N 120 200 Water Clear 150° P 200 300 Q 300 400 *H *55 *80 *M *80 *120 *N *120 *200 ■ Green (AlGaInP) F 20 40 G 40 55 H 55 80 *F *20 *40 *G *40 *55 *H *55 *80 SELECTION GUIDE APFA3010R2G2C-C6-AMT Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. 3. LEDs will be provided from the listed bin codes. The bins delivered to the customer will be at Kingbright's discretion. Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd: ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. 5. LEDs will be provided from the listed bin codes. The bins delivered to the customer will be at Kingbright's discretion.
© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1754 / 1203013906 Rev No: V.3A Date: 03/22/2023 Page 3 / 5 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 T a = 25 °C Green Red Wavelength (nm) Relative Intensity (a. u.) TECHNICAL DATA RELATIVE INTENSITY vs. WAVELENGTH 0.50.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.01.0 Ta = 25 °C SPATIAL DISTRIBUTION HYPER RED ABSOLUTE MAXIMUM RATINGS at TA=25°C 0.1 100 Ta = 25 °C Forward voltage (V) Forward current (mA) 0.01 0.1 11 0 1 0 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at T a = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature Parameter Symbol Value Unit Hyper Red Green Power Dissipation PD 75 mW Reverse Voltage VR 5 5 V Junction Temperature Tj 115 115 °C Operating Temperature Top -40 to +100 °C Storage Temperature Tstg °C DC Forward Current IF 30 30 mA Peak Forward Current IFM [1] 185 150 mA Electrostatic Discharge Threshold (HBM) - 3000 3000 V Thermal Resistance (Junction / Ambient) Rth JA [2] 500 650 °C/W Thermal Resistance (Junction / Solder point) Rth JS [2] 400 550 °C/W -40 to +115 APFA3010R2G2C-C6-AMT Notes: 1. 1/10 Duty Cycle , 0.1ms Pulse Width . 2. Rth JA, Rth JS Results from mounting on PC board FR4 (pad size ≥16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1754 / 1203013906 Rev No: V.3A Date: 03/22/2023 Page 4 / 5 TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) PACKING & LABEL SPECIFICATIONS Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. GREEN 0.1 100 Ta = 25 °C Forward voltage (V) Forward current (mA) 0.01 0.1 11 0 1 0 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at T a = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature APFA3010R2G2C-C6-AMT REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS
© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1754 / 1203013906 Rev No: V.3A Date: 03/22/2023 Page 5 / 5 Items Symbols Conditions Failure Criteria luminous Intensity lV IF = 20mA Testing Min. Value < Spec. Min. Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value ≥ Spec. Max. Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥ Spec. Max. Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking RELIABILITY TEST ITEMS AND CONDITIONS The reliability of products shall be satisfied with items listed below LOT TOLERANCE PERCENT DEFECTIVE (LTPD) : 10% No. Test Item Standards Test Condition Test Times / Cycles Number of Damaged
1 Continuous operating test - Ta = 25°C, IF = maximum rated current * 1,000 h 0 / 22
2 High Temp. operating test EIAJ ED-4701/100(101) Ta = 100°C, IF = maximum rated current * 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40°C, IF = maximum rated current * 1,000 h 0 / 22 4 High temp. storage test EIAJ ED-4701/100(201) Ta = maximum rated storage temperature 1,000 h 0 / 22 5 Low temp. storage test EIAJ ED-4701/100(202) Ta = -40°C 1,000 h 0 / 22 6 High temp. & humidity storage test EIAJ ED-4701/100(103) Ta = 60°C, RH = 90% 1,000 h 0 / 22 7 High temp. & humidity operating test EIAJ ED-4701/100(102) Ta = 60°C, RH = 90% IF = maximum rated current * 1,000 h 0 / 22
8 Soldering reliability test EIAJ ED-4701/100(301)
Moisture soak: 30°C, 70% RH, 72h Preheat: 150~180°C (120s max.) Soldering temp: 260°C(10s) 2 times 0 / 18
9 Thermal shock operating test - Ta = -40°C(15min) ~ 100°C(15min)
IF = derated current at 100°C 1,000 cycles 0 / 22
10 Thermal shock test - Ta = -40°C(15min) ~ maximum rated
Storage temperature(15min) 1,000 cycles 0 / 22 11 Electric Static Discharge (ESD) EIAJ ED-4701/100(304) C = 100pF, R2 = 1.5KΩ V = 3000V(Hyper Red) V=3000V (Green) Once each Polarity 0 / 22
12 Vibration test - a = 196m/s², f = 100~2KHz, t = 48min for all xyz axes 4 times 0 / 22
- : Refer to forward current vs. derating curve diagram CRITERIA FOR JUDGING DAMAGE APFA3010R2G2C-C6-AMT PRECAUTIONARY NOTES 1. The information included in this document reflects represent ative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be rep roduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright applicati on notes available at https://www.KingbrightUSA.com/ApplicationNotes