APFA2507Y3G3-CC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1759 / 1203016109 Rev No: V.2B Date: 01/11/2023 Page 1 / 4 DESCRIPTIONS  The Super Bright Yellow device is based on light emitting diode chip made from AlGaInP  The Green source color devices are made with InGaN on Sapphire Light Emitting Diode  Electrostatic discharge and power surge could damage the LEDs  It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs  All devices, equipments and machineries must be electrically grounded

FEATURES

 2.5 x 1.0 x 0.7 mm right angle SMD LED, 0.7 mm thickness  Low power consumption  Wide viewing angle  Ideal for backlight and indicator  Package: 3000 pcs / reel  Moisture sensitivity level: 3  Tinned pads for improved solderability  Halogen-free  RoHS compliant

APPLICATIONS

 Backlight  Status indicator  Home and smart appliances  Wearable and portable devices  Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS APFA2507Y3G3-CC 2.5 x 0.7 mm Right Angle SMD Chip LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) SELECTION GUIDE Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 20mA [2] Viewing Angle [1] Min. Typ. 2θ1/2 APFA2507Y3G3-CC ■ Super Bright Yellow (AlGaInP) Water Clear 120 300 130° ■ Green (InGaN) 400 550 Yellow Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. 5. For right angle SMD LEDs, the solder stencil should be at least 5mil in thickness, to prevent poor solder wetting due to insufficient solder paste.

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1759 / 1203016109 Rev No: V.2B Date: 01/11/2023 Page 2 / 4 ABSOLUTE MAXIMUM RATINGS at TA=25°C ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C APFA2507Y3G3-CC Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Parameter Symbol Emitting Color Value Unit Typ. Max. Wavelength at Peak Emission IF = 20mA λpeak Super Bright Yellow Green 590 515 - nm Dominant Wavelength IF = 20mA λdom [1] Super Bright Yellow Green 590 525 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Super Bright Yellow Green 35 - nm Capacitance C Super Bright Yellow Green - pF Forward Voltage IF = 20mA VF [2] Super Bright Yellow Green 2.0 3.3 2.5 4.1 V Reverse Current (VR = 5V) IR Super Bright Yellow Green - 10 µA Parameter Symbol Value Unit Super Bright Yellow Green Power Dissipation PD 75 102.5 mW Reverse Voltage VR 5 5 V Junction Temperature TJ 115 115 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +85 °C DC Forward Current IF 30 25 mA Peak Forward Current IFM [1] 140 150 mA Electrostatic Discharge Threshold (HBM) - 3000 450 V Notes: 1. 1/10 Duty Cycle , 0.1ms Pulse Width . 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1759 / 1203016109 Rev No: V.2B Date: 01/11/2023 Page 3 / 4 TECHNICAL DATA 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 T a = 25 °C Green Wavelength (nm) Relative Intensity (a. u.) Yellow RELATIVE INTENSITY vs. WAVELENGTH 0.5 0.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C SPATIAL DISTRIBUTION APFA2507Y3G3-CC GREEN T a = 25 °C Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 0 1 02 03 04 05 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at T a = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 0 1 02 03 04 05 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at Ta = 25 °C SUPER BRIGHT YELLOW Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1759 / 1203016109 Rev No: V.2B Date: 01/11/2023 Page 4 / 4 APFA2507Y3G3-CC TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) PACKING & LABEL SPECIFICATIONS REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PRECAUTIONARY NOTES 1. The information included in this document reflects represent ative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without n otice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmenta l and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application h as special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be rep roduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright applicati on notes available at https://www.KingbrightUSA.com/ApplicationNotes Yellow