APFA2507LSURKSYKZGKC_V01 KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

© 2023 Kingbright. All Rights Reserved. Spec No: DSAO6074 / 1203015273 Rev No: V.5A Date: 01/11/2023 Page 1 / 4 DESCRIPTIONS  The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode  The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip  The Green source color devices are made with InGaN on Sapphire Light Emitting Diode  Electrostatic discharge and power surge could damage the LEDs  It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs  All devices, equipments and machineries must be electrically grounded

FEATURES

 2.5 x 1.0 x 0.7 mm right angle SMD LED, 0.7 mm thickness  Low power consumption  Wide viewing angle  Ideal for backlight and indicator  Package: 3000 pcs / reel  Moisture sensitivity level: 3  Tinned pads for improved solderability  Halogen-free  RoHS compliant

APPLICATIONS

 Backlight  Status indicator  Home and smart appliances  Wearable and portable devices  Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS SELECTION GUIDE Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. APFA2507LSURKSYKZGKC 2.5 x 0.7 mm Right Angle SMD Chip LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 2mA [2] Viewing Angle [1] Min. Typ. 2θ1/2 APFA2507LSURKSYKZGKC ■ Hyper Red (AlGaInP) Water Clear 20 30 130° *6 *10 ■ Super Bright Yellow (AlGaInP) 6 15 *6 *15 20 60 *20 *60 ■ Green (InGaN) Red Yellow Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. 5. For right angle SMD LEDs, the solder stencil should be at least 5mil in thickness, to prevent poor solder wetting due to insufficient solder paste.

© 2023 Kingbright. All Rights Reserved. Spec No: DSAO6074 / 1203015273 Rev No: V.5A Date: 01/11/2023 Page 2 / 4 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Emitting Color Value Unit Typ. Max. Wavelength at Peak Emission IF = 2mA λpeak Hyper Red Super Bright Yellow Green 645 590 515 - nm Dominant Wavelength IF = 2mA λdom [1] Hyper Red Super Bright Yellow Green 630 590 525 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 2mA Δλ Hyper Red Super Bright Yellow Green - nm Capacitance C Hyper Red Super Bright Yellow Green - pF Forward Voltage IF = 2mA VF [2] Hyper Red Super Bright Yellow Green 1.75 1.85 2.65 2.2 2.2 3.1 V Reverse Current (VR = 5V) IR Hyper Red Super Bright Yellow Green µA Temperature Coefficient of λpeak IF = 2mA, -10°C ≤ T ≤ 85°C TCλpeak Hyper Red Super Bright Yellow Green 0.14 0.12 0.05 - nm/°C Temperature Coefficient of λdom IF = 2mA, -10°C ≤ T ≤ 85°C TCλdom Hyper Red Super Bright Yellow Green 0.05 0.07 0.03 - nm/°C Temperature Coefficient of VF IF = 2mA, -10°C ≤ T ≤ 85°C TCV Hyper Red Super Bright Yellow Green -1.9 -1.9 - mV/°C Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd: ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at TA=25°C Parameter Symbol Value Unit Hyper Red Super Bright Yellow Green Power Dissipation PD 75 75 102.5 mW Reverse Voltage VR 5 5 5 V Junction Temperature Tj 115 115 115 °C Operating Temperature Top -40 to +85 °C Storage Temperature Tstg -40 to +85 °C DC Forward Current IF 30 30 25 mA Peak Forward Current IFM [1] 185 175 150 mA Electrostatic Discharge Threshold (HBM) - 3000 3000 450 V Thermal Resistance (Junction / Ambient) Rth JA [2] 480 770 490 °C/W Thermal Resistance (Junction / Solder point) Rth JS [2] 350 660 370 °C/W APFA2507LSURKSYKZGKC Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.

© 2023 Kingbright. All Rights Reserved. Spec No: DSAO6074 / 1203015273 Rev No: V.5A Date: 01/11/2023 Page 3 / 4 Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 2.0 4.0 6.0 8.0 10.0 02468 1 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 2 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at Ta = 25 °C Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 2.0 4.0 6.0 8.0 10.0 02468 1 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 2 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at Ta = 25 °C 0.5 0.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 T a = 25 °C Green Yellow Red Wavelength (nm) Relative Intensity (a. u.) Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 2.0 4.0 6.0 8.0 10.0 02468 1 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 2 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at Ta = 25 °C HYPER RED TECHNICAL DATA RELATIVE INTENSITY vs. WAVELENGTH SPATIAL DISTRIBUTION Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature SUPER BRIGHT YELLOW Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature GREEN Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature APFA2507LSURKSYKZGKC

© 2023 Kingbright. All Rights Reserved. Spec No: DSAO6074 / 1203015273 Rev No: V.5A Date: 01/11/2023 Page 4 / 4 PACKING & LABEL SPECIFICATIONS TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS APFA2507LSURKSYKZGKC Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PRECAUTIONARY NOTES 1. The information included in this document reflects represent ative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without n otice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmenta l and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application h as special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be rep roduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright applicati on notes available at https://www.KingbrightUSA.com/ApplicationNotes