APFA2507B2G2C KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1763 / 1203016141 Rev No: V.2B Date: 01/11/2023 Page 1 / 4 DESCRIPTIONS  The Blue source color devices are made with InGaN Light Emitting Diode  The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode  Electrostatic discharge and power surge could damage the LEDs  It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs  All devices, equipments and machineries must be electrically grounded

FEATURES

 2.5 x 1.0 x 0.7 mm right angle SMD LED, 0.7 mm thickness  Low power consumption  Wide viewing angle  Ideal for backlight and indicator  Package: 3000 pcs / reel  Moisture sensitivity level: 3  Tinned pads for improved solderability  Halogen-free  RoHS compliant

APPLICATIONS

 Backlight  Status indicator  Home and smart appliances  Wearable and portable devices  Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS APFA2507B2G2C 2.5 x 0.7 mm Right Angle SMD Chip LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 20mA [2] Viewing Angle [1] Min. Typ. 2θ1/2 APFA2507B2G2C ■ Blue (InGaN) Water Clear 130° ■ Green (AlGaInP) 20 45 SELECTION GUIDE Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. 5. For right angle SMD LEDs, the solder stencil should be at least 5mil in thickness, to prevent poor solder wetting due to insufficient solder paste.

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1763 / 1203016141 Rev No: V.2B Date: 01/11/2023 Page 2 / 4 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Emitting Color Value Unit Typ. Max. Wavelength at Peak Emission IF = 20mA λpeak Blue Green 460 574 - nm Dominant Wavelength IF = 20mA λdom [1] Blue Green 465 570 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Blue Green - nm Capacitance C Blue Green 100 15 - pF Forward Voltage IF = 20mA VF [2] Blue Green 3.3 2.1 2.5 V Reverse Current (VR = 5V) IR Blue Green - 50 µA Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd: ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at TA=25°C Parameter Symbol Value Unit Blue Green Power Dissipation PD 120 75 mW Reverse Voltage VR 5 5 V Junction Temperature Tj 115 115 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg °C DC Forward Current IF 30 30 mA Peak Forward Current IFM [1] 150 150 mA Electrostatic Discharge Threshold (HBM) - 250 3000 V -40 To +85 Notes: 1. 1/10 Duty Cycle , 0.1ms Pulse Width . 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. APFA2507B2G2C

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1763 / 1203016141 Rev No: V.2B Date: 01/11/2023 Page 3 / 4 0.5 0.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C TECHNICAL DATA 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 T a = 25 °C Blue Wavelength (nm) Relative Intensity (a. u.) Green RELATIVE INTENSITY vs. WAVELENGTH SPATIAL DISTRIBUTION APFA2507B2G2C Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 0 1 02 03 04 05 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at Ta = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature BLUE T a = 25 °C Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 0 1 02 03 04 05 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at T a = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature GREEN

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1763 / 1203016141 Rev No: V.2B Date: 01/11/2023 Page 4 / 4 PACKING & LABEL SPECIFICATIONS TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS APFA2507B2G2C Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PRECAUTIONARY NOTES 1. The information included in this document reflects represent ative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without n otice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmenta l and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application h as special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be rep roduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright applicati on notes available at https://www.KingbrightUSA.com/ApplicationNotes