APEKA4030SURC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

4.0mmx3.0mm RIGHT ANGLE SMT LED, 2.65mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE :500PCS / REEL. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. APEKA4030SURC HYPER RED

Description

The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diod e.

SPEC NO: DSAD1184 REV NO: V.2 DATE: JUN/30/2005 PAGE: 2 O F 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:12 04000024 Selection Guid e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T A =25 °C Absolute Maximum Ratings at T A =25 °C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2θθθθ1/2 APEKA4030SURC HYPER RED (InGaAlP) WATER CLEAR 70 250 90 ° Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Hyper Red 640 nm IF=20mA λD Dominant Wavelength Hyper Red 628 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Hyper Red 27 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Parameter Hyper Red Units Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C

SPEC NO: DSAD1184 REV NO: V.2 DATE: JUN/30/2005 PAGE: 3 O F 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:12 04000024 Hyper Red APEKA4030SURC

SPEC NO: DSAD1184 REV NO: V.2 DATE: JUN/30/2005 PAGE: 4 O F 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:12 04000024 Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) APEKA4030SURC

SPEC NO: DSAD1184 REV NO: V.2 DATE: JUN/30/2005 PAGE: 5 O F 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:12 04000024 Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/ -1nm 2. Luminous Intensity: +/ -15% 3. Forward Voltage: +/ -0.1V Note: Accuracy may depend on the sorting parameters. PACKING & LABEL SPECIFICATIONS APEKA4030SURC