APD2520CGCK03 KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

4.5x2mm SMT LED,0.5mm THICKNESS LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 1000PCS/REEL. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches) . 2. Tolerance is ±0 .2(0.008") unless otherwise noted . 3.Specifications are subject to change without notice . APD2520CGCK03 GREEN

Description

The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode.

SPEC NO: DSAD1077 REV NO: V.3 DATE: MAR/15/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203001018 Selection Guid e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T A =25 °C Absolute Maximum Ratings at T A =25 °C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) @ 20 mA Viewing Angle Min. Typ. 2θθθθ1/2 APD2520CGCK03 20 °GREEN (InGaAIP) WATER CLEAR 70 300 Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Green 574 nm IF=20mA λD Dominant Wavelength Green 570 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Green 20 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF Forward Voltage Green 2.1 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Parameter Green Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C

SPEC NO: DSAD1077 REV NO: V.3 DATE: MAR/15/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203001018 Green APD2520CGCK03

SPEC NO: DSAD1077 REV NO: V.3 DATE: MAR/15/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203001018 Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) APD2520CGCK03 If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/ -1nm 2. Luminous Intensity: +/ -15% 3. Forward Voltage: +/ -0.1V Note: Accuracy may depend on the sorting parameters.