APC18 EMERSON-NETWORKPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 Special Features Electrical Specs Special Features Electrical Specs

60 Watts

APC18 (18 Amps)

  • Point of load (POL) applications
  • High Current slew rate at 2.5A/us1
  • Open frame SMT
  • High efficiency, 3.3V @ 95% (Typ)
  • Adjustable Output through external resistor programming
  • -40°C to +85°C Ambient operating temperature
  • UVLO protection
  • Positive Enable function
  • Low output ripple and noise
  • Regulation to zero load Environmental Operating temperature -40°C to +85°C Storage temperature: -40°C to +125°C MTBF: >1 million hours Input Input range 3.0V to 5.5V Efficiency 3.3V @ 95% (Typ) Control Enable TTL compatible (positive enable) Output Regulation (Line, Load, Temp) <3% Load Current 18A max Ripple and noise1 50mV Output Adjust Range 0.75V - 3.6V Current Slew Rate up to 2.5A/µS Transient Response1 150mV typical deviation (3.3Vo) for 50% to 100% step load 200 µS recovery Remote Sense 10% of Vo Turn On Input Voltage 3.0V (Typical) UVLO Hysterisis 300mV (Typical) OCP/OTP Hiccup - auto recovery Isolation Non-Isolated module Specifications subject to change without notice. Safety UL, cUL 609500 Recognized (Pending) TUV EN60950 Licensed (Pending) Total Power: 60 Watts Input Voltages: 3.0V to 5.5V No. of Outputs: Single

Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 AMERICAS

5810 Van Allen Way

Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698

Ordering Information

Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 www.astecpower.com Notes: 1. 200uF and 2x 150uF input and output capacitance required. 2. All specifications are typical at nominal line, full load and 25°C ambient temperature unless otherwise noted. 3. All specifications subject to change without notice. Mechanical drawings are for reference only 4. Technical Reference Notes should be consulted for detailed information 5. Warranty: 1yr Input Output Output Current Efficiency Model Voltage Voltage Full Load (Typ) Number 3.0V - 5.5V 0.75 to 3.6V 18A 95% APC18T04-9(J) Note: - 18A max output current with total output power limited to 60W - minimal output derating required - Typical Efficiency for 3.3V output; full load; nominal input voltage; 200LFM at T A=25 ºC - Suffix “J” designates tray packaging, non “J” is T&R Mechanical Dimensions * Astec reserves the right to make changes to the information contained herein without notice and assumes no liability as a result of its use or application. (REV A: SEPTEMBER 1, 2004) Pin Assignment PIN SIDE DOWN VIEW Recommended PAD Layout PAD Size MIN: 1.6 x 2.8 mm [0.065 x 0.110 inches] REC: 1.8 x 2.8 mm [0.070 x 0.110 inches] MAX: 2.0 x 3.0 mm [0.080 x 0.130 inches] GND VO TRIM SENSE PIN SIDE UP VIEW VIN ENABLE