APC12 ASTEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662 Special Features Electrical Specs Special Features Electrical Specs
40 WattsAPC12 (12 Amps)
- Point of load (POL) applications
- High efficiency, 3.3V @ 92% (Typ)
- -40°C to +85°C Ambient operating temperature
- Open Frame SMT
- Positive enable function
- Low output ripple and noise
- Regulation to zero load
- Programmable Output from 0.9V to 3.6V (External Trim Resistor or Voltage Source)
- Fixed frequency switching (200 kHz) Environmental Operating temperature -40°C to +85°C Storage temperature: -40°C to +125°C MTBF: >1 million hours Input Input range 1.8-6.0VDC and 5.6-13.0VDC Input Surge 7V for 03 version 14V for 08 version Efficiency 3V3 @ 92% (Typ) Control Enable TTL compatible (positive enable) Output Regulation (Line, Load, Temp) <3% Ripple and noise1 75mV - (2.5V to 3.6V Output) 50mV - (0.9V to 2.4V Output) Output voltage adjust range 0.9V to 3.6V Transient Response typical 5% deviation with 50% to 75% full load 650 µS recovery Isolation Non-Isolated module Specifications subject to change without notice. Safety UL, cUL 609500 Recognized TUV EN60950 Licensed Total Power: 40 Watts Input Voltages: 1.8 to 13 V No. of Outputs: Single REV C:JANUARY 03
Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698
Ordering Information
Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 AMERICAS Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 www.astecpower.com Optional Pins: PGood - Power Good Logic Signal P - Active Current Share Pin Trim - Trim Pin (0.9 to 3.6V) Notes:1. 20 MHz bandwidth. External 56 uF (ESR < 75mohm) for 03 device and 100uF (ESR < 40mohm) for 08 device across Vout and Gnd. 2. Meet FCC class A and ETS300-386-1 requirements for conducted noise. Consult Factory for filtering information to meet FCC class B, VDE or EIC specifications. 3. All specifications are typical at nominal line, full load, and 25°C unless otherwise noted. 4. All specifications subject to change without notice. Mechanical drawings are for reference only 5. Technical Reference Notes should be consulted for detailed information 6. Warranty: 1yr Input Output Efficiency Model Voltage Voltage Full Load Number 1.8V-6.0V 0.9V @ 12A 76% (Typ)1 APC12J03 1.8V-6.0V 1.2V @ 12A 81% (Typ APC12K03 1.8V-6.0V 1.5V @ 12A 86% (Typ) APC12M03 1.8V-6.0V 1.8V @ 12A 87% (Typ) APC12Y03 1.8V-6.0V 2.5V @ 12A 90% (Typ) APC12G03 1-8V-6.0V 3.3V @ 12A 92% (Typ) APC12F03 1-8V-6.0V 0.9V @ 12A 76% (Typ) APC12J03-93 5.0V-13.0V 0.9V @ 12A 73% (Typ) APC12J08 5.0V-13.0V 1.2V @ 12A 77% (Typ) APC12K08 5.0V-13.0V 1.5V @ 12A 81% (Typ) APC12M08 5.0V-13.0V 1.8V @ 12A 82% (Typ) APC12Y08 5.0V-13.0V 2.5V @ 12A 87% (Typ) APC12G08 5.0V-13.0V 3.3V @ 12A 90% (Typ) APC12F08 5.0V-13.0V 0.9V @ 12A 74% (Typ) APC12J08-93 Note: 1. Typical Efficiency is measured at full load, mid range input, and Tc=25 Deg C 2. “-9MA” (suffix) - Output Trim, PGood and Parallel Options available on all modules 3. “-9” (suffix) - Output Trim option available on 0.9V version. Top View of Board Mechanical Dimensions Pad Layout REVC: JANUARY 03