APBA3010SEKCGKC-GX KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

z 3.0mmx2.0mmx1.0mm right angle SMD LED, 1.0mm thickness. z Low power consumption. z Wide viewing angle. z Ideal for backlight and indicator. z Package : 2000 pcs / reel. z Moisture sensitivity level : level 3. z Tinned pads for improved solderability z RoHS compliant. Descriptions z The Super Bright Orange device is made with AlGaInP (on GaAs substrate) light emitting diode chip. z The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. ORANGE ORANGE

SPEC NO: DSAO7613 REV NO: V.1A DATE: MAR/31/2016 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203002648 Selection Guide Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 APBA3010SEKCGKC-GX Super Bright Orange (AlGaInP) Water Clear 120 320 140° *80 *150 40 70 *40 * 70 Green (AlGaInP) Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Super Bright Orange Green 610 574 nm IF=20mA λD [1] Dominant Wavelength Super Bright Orange Green 601 570 nm IF=20mA Δλ1/2 Spectral Line Half-width Super Bright Orange Green 20 nm IF=20mA C Capacitance Super Bright Orange Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Orange Green 2.1 2.1 2.5

2.5 V IF=20mA

IR Reverse Current Super Bright Orange Green 10 10 uA VR = 5V Parameter Super Bright Orange Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 195 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.

SPEC NO: DSAO7613 REV NO: V.1A DATE: MAR/31/2016 PAGE: 3 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203002648 APBA3010SEKCGKC-GX Super Bright Orange

SPEC NO: DSAO7613 REV NO: V.1A DATE: MAR/31/2016 PAGE: 4 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203002648 Green

SPEC NO: DSAO7613 REV NO: V.1A DATE: MAR/31/2016 PAGE: 5 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203002648 APBA3010SEKCGKC-GX Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm)

SPEC NO: DSAO7613 REV NO: V.1A DATE: MAR/31/2016 PAGE: 6 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1203002648 PACKING & LABEL SPECIFICATIONS APBA3010SEKCGKC-GX Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes