APB3227ZGKQBDC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

 3.2mmx2.7mm SMT LED, 1.1mm thickness.  Bi -color,low power consumption.  Wide viewing angle.  Ideal for backlight and indicator.  Package : 2000 pcs / reel.  Moisture sensitivity level : level 3.  RoHS compliant. Descriptions  The Green source color devices are made with InGaN on Sapphire Light Emitting Diode.  The Blue source color devices are made with InGaN Light Emitting Diode.  Electrostatic discharge and power surge could damage the LEDs.  It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs.  All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAO1003 REV NO: V.1B DATE: JAN/06/2015 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203014811 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2 θ1/2 APB3227ZGKQBDC Green (InGaN) Water Clear 200 350 Blue (InGaN) 55 100 100° Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Green Blue 515 460 nm I F=20mA λD [1] Dominant Wavelength Green Blue 525 465 nm I F=20mA Δλ1/2 Spectral Line Half-width Green Blue 25 nm I F=20mA C Capacitance Green Blue 100 pF V F=0V;f=1MHz VF [2] Forward Voltage Green Blue 3.3 3.3 4.1

4 V I F=20mA

50 uA V R = 5V Parameter Green Blue Units Power dissipation 102.5 120 mW DC Forward Current 25 30 mA Peak Forward Current [1] 150 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C

SPEC NO: DSAO1003 REV NO: V.1B DATE: JAN/06/2015 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203014811 APB3227ZGKQBDC Green

SPEC NO: DSAO1003 REV NO: V.1B DATE: JAN/06/2015 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203014811 Blue

SPEC NO: DSAO1003 REV NO: V.1B DATE: JAN/06/2015 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203014811 APB3227ZGKQBDC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm)

SPEC NO: DSAO1003 REV NO: V.1B DATE: JAN/06/2015 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203014811 PACKING & LABEL SPECIFICATIONS APB3227ZGKQBDC Terms and conditions for the usage of this document 1.The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2.The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4.The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5.The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6.All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes