APB3025SURKQWDF KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

z 3.0mmx2.5mm SMD LED, 1.1mm thickness. z Bi-color, Low power consumption. z Wide viewing angle. z Ideal for backlight and indicator. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. White

SPEC NO: DSAK8170 REV NO: V.3A DATE: OCT/14/2014 PAGE: 2 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203011345 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2 θ1/2 APB3025SURKQWDF Hyper Red (AlGaInP) Yellow Fluorescent 120 220 120° *40 *55 200 380 *200 *380 White (InGaN) Absolute Maximum Ratings at TA=25°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Parameter Hyper Red White Units Power dissipation 75 120 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Electrostatic Discharge Threshold (HBM) 3000 250 V Notes: 1. Forward Voltage: +/-0.1V. 2: Measurement Tolerance Of The Chromaticity Coordinates Is ±0.01. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Electrical / Optical Characteristics at TA=25°C [White] Symbol Parameter Device Typ. Max. Units Test Conditions VF [1] Forward Voltage White 3.3 4.0 V IF=20mA IR Reverse Current White 50 uA VR = 5V X [2] Chromaticity Coordinates White 0.31 Y [2] 0.31 C Capacitance White 100 pF VF=0V;f=1MHz Electrical / Optical Characteristics at TA=25°C [Red] Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red 645 nm I F=20mA λD [1] Dominant Wavelength Hyper Red 630 nm I F=20mA Δλ1/2 Spectral Line Half-width Hyper Red 28 nm I F=20mA C Capacitance Hyper Red 35 pF V F=0V;f=1MHz VF [2] Forward Voltage Hyper Red 1.95 2.5 V I F=20mA IR Reverse Current Hyper Red 10 uA V R = 5V

SPEC NO: DSAK8170 REV NO: V.3A DATE: OCT/14/2014 PAGE: 3 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203011345 APB3025SURKQWDF Hyper Red

SPEC NO: DSAK8170 REV NO: V.3A DATE: OCT/14/2014 PAGE: 4 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203011345 White

SPEC NO: DSAK8170 REV NO: V.3A DATE: OCT/14/2014 PAGE: 5 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203011345 APB3025SURKQWDF White CIE 0.20 0.25 0.30 0.35 0.40 x y x y x y x y 0.263 0.213 0.282 0.245 0.298 0.271 0.313 0.296 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01.

SPEC NO: DSAK8170 REV NO: V.3A DATE: OCT/14/2014 PAGE: 6 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203011345 APB3025SURKQWDF Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm)

SPEC NO: DSAK8170 REV NO: V.3A DATE: OCT/14/2014 PAGE: 7 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203011345 PACKING & LABEL SPECIFICATIONS APB3025SURKQWDF Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes