APB CK-COMPONENTS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A

12 Oct 16

  • IP67 sealed
  • 1,000,000 life cycle
  • Illumination
  • Threaded or snap-in mounting
  • RoHS compliant Typical Applications
  • Harsh environments
  • Off-Road
  • Industrial
  • Medical
  • Transportation
  • Joystick control modules
  • Gaming
  • Military Specifications FUNCTION: SPST Momentary CONTACT ARRANGEMENT: N.O. MOUNTING TYPE: Snap-in (no panel seal) Threaded body (hex nut, lock washer, and panel seal gasket provided) Torque spec for threaded body: Do not exceed 8-9 in-lbs (0.9-1.0 N.m) Mechanical OPERATING LIFE: 1,000,000 cycles TOTAL TRAVEL: 2.1 ± 0.2 mm OPERATING POINT 1.55 ± 0.25 mm OVER TRAVEL: 0.6 min. OPERATING FORCE: 4N ± 1N standard configuration; other force option 2N ± 0.5N VIBRATION: 10-500 Hz 10g Max SHOCK: 60g 11ms sawtooth wave Electrical CONTACT RATING: 200mA @ 24 V DC resistive (500,000 cycles) 100mA @ 50 V DC resistive (500,000 cycles) 400mA @ 32 V AC resistive (500,000 cycles) 125mA @ 125 V AC resistive (1,000,000 cycles) DIELECTRIC STRENGTH: 1000 V AC min. INSULATION RESISTANCE: 1 G Ω @ 500 VDC INITIAL CONTACT RESISTANCE 50 mΩ max (without wire leads) BOUNCE TIME: <5 ms Materials HOUSING: PBT BASE: PBT CAP: Painted polycarbonate ACTUATOR: Illuminated: Clear polycarbonate INTERNAL SEAL: Silicone rubber TERMINALS: Copper alloy, gold over silver plating MOVABLE CONTACT: Copper alloy, gold over silver plating TERMINAL SEAL: Epoxy WIRE LEADS: UL1569 Black 22 AWG Operating Environment OPERATING TEMPERATURE: -40˚C to 85˚C ESD PROTECTION: 20 KV min. Process Environment SEALING: IP67 for threaded body IP65 for snap-in version (no panel seal) NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Designation APB APB Series EBPA APB Series Backlit Pushbutton Switch Operating Force 2 2 Newtons 4 4 Newtons Cap E Extended Dome (600E) Illumination

01 Super White

07 Super Blue

E Contact Material B Gold Terminal Seal E Epoxy Termination Z Solder Lug W 12” Wire Leads 22 AWG Bushing Style S Snap-in plastic T Threaded plastic B Cap Symbol

000 Painted black over

white without symbol*

001 Plus

002 Locked

003 Engine stop

004 Park brake release

005 Engine start

006 Fast

007 Slow

008 Unlocked

009 Rock shaft lower

010 Minus

  • cap painted black over white to allow customer laser etching

B A 27,95 REF [1.100] 20,35 [.801] 1,5 [.059] 7,6 [.299]17,4 [.685] 2X 7,5 [.295] 2X 4 [.157] 2X 1,81 [.071] 12,35 [.486] 5,7 [.224] DOWN POSITION 0,85 [.033] PANEL THICKNESS DIM A ( 0.05 MM) DIM B ( 0.05 MM) 1 MM [0.039 IN] 13.70 MM [0.539 IN] 13.00 MM [0.512 IN] 2 MM [0.079 IN] 13.80 MM [0.539 IN] 13.00 MM [0.512 IN] 3 MM [0.118 IN] 13.90 MM [0.547 IN] 13.10 MM [0.516 IN] THREADED BODY MIN PANEL THICKNESS 1 MM 13.70 MM [0.539 IN] 13.00 MM [0.512 IN] SPST-NO-DB ELECTRICAL SCHEMATIC SEE SCHEMATIC A 0.1 MM MIN CHAMFER ON THE LEADING EDGE OF MOUNTING HOLE IS RECOMMENDED FOR SNAP-IN VERSION. M13 X 1.25-6gTHREADED PANEL CUTOUT SNAP-IN 1 2 A-158 Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on

5,65 TYP [.222] 0,5 TYP [.020] [.157] 2,75 [.108] 6,44 TYP [.254] 0,75 TYP [.030] 2,04 TYP [.080] 0,5 TYP [.020] 2,83 TYP [.111] 2,83 TYP [.111] LED TERMINAL ANODE (+) LED TERMINAL CATHODE (-) LED TERMINAL ANODE (+) LED TERMINAL CATHODE (-) A-159 Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A 34,78 TYP [1.369] 11,11 [.437] 27,04 TYP [1.065] WIRES: BLACK - TERMINALS RED - LED (+) POSITIVE WHITE - LED (-) NEGATIVE WIRE LEADS WITH POTTED BASE, SNAP-IN ILLUMINATION WIRE LEADS WITH POTTED BASE, THREADED ILLUMINATION 304,81 ± 6,35 (12.00 ± .25) Wire Leads

22 AWG STD

304,81 ± 6,35 (12.00 ± .25) Wire Leads W 12” WIRE LEADS Z SOLDER LUG CONTACT MATERIAL TERMINAL SEAL B GOLD E EPOXY All models are epoxy sealed OPTION CODE CONTACT MATERIAL B Gold

ø 17.25 0.77 13.82 LOCK WASHER Part Number 647D00000 15.90 2.40 ø 15.90 REF18.36 M13 X 1.25-6H HEX NUT Part number 515D00000 A A

0.56 REF

2 X ø 14.60 2 X ø 16.30 ø 17 .00 ø 13.80 0.304X 0.13 4X R 0.13 REF See Detail A Detail A Scale 15:1 PANEL SEAL Part Number 655D00000 A-160 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on -000 NO SYMBOL -001 PLUS -002 LOCKED -003 ENGINE STOP -004 PARK BRAKE RELEASE -005 ENGINE START -006 FAST -007 SLOW -008 UNLOCKED -009 ROCK SHAFT LOWER -010 MINUS NOTES: 1. ALL GRAPHICS MUST BE POSITIONED AS SHOWN, PERPENDICULAR TO ALIGNMENT FEATURE ON UNDERSIDE OF CAP. 2. GRAPHIC MARKING MUST BE ALIGNED WITH THE FLAT FEATURE ON THE UNDERSIDE OF THE CAP AS SHOWN, TOLERANCE 3 B A PANEL CUTOUT Panel Orientation Flat indicates bottom See chart on previous page for dimensions HARDWARE