APA100 ASTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

1200 Watts

APA100 (PFC)

  • Unity power factor
  • High efficiency - up to 96%
  • Universal input voltage and frequency range
  • Up to 1200W output power
  • Parallelable with current sharing within 3%
  • < 10% harmonic distortion conforming to IEC555-2
  • 85°C baseplate operating temperature (no derating)
  • High reliability - over 1 million hours MTBF
  • Power fail warning signal
  • PLD feature
  • Enable output to control AMPSS® DC-DC converters
  • 125Khz fixed Switching frequency Operating temperature (baseplate): -20°C to +85°C (no derating) Storage temperature: -40°C to +105°C Overtemperature protection: 90°C typical MTBF: > 1 million hours (50°C baseplate) Input Input Voltage 85 to 265 Vac Input Frequency 50/60 Hz Efficiency 92% typical (VI = 115 Vac); 94% typical (VI = 230 Vac) Total Harmonic Distortion Less than10% Power Factor 0.99 typical (IO = 2A); 0.97 typical (IO = 1A) Control Power Fail Warning Direct drive output to opto-isolator Power Fail Warning Adjust 205 to 355 Vdc adjustable LD Enable Direct drive output to opto-isolator PFC Enable TTL compatible (low to enable) Voltage Adjust 240V to 393V Clock Input (external sync) 3.3 to 5.5Vp-p @ 1MHz ±5% Clock Output (int. clock) 4.5Vp-p typical @ 1MHz ±0.5% Temperature Monitor Output 10 mV/°K (2.73V = 0°C) Current Monitor Output 0 to 1.28mA (1 mA = 2.5A) Output Output Voltage 383 V typical (IO = 2A); 393 V typical (IO = 0A) Current Share Accuracy 3% typical Overvoltage Protection 417 V typical Power Limit VIN=85Vac; Pmax=750W VIN=180Vac; Pmax= 918W VIN=230Vac; Pmax= 1200W UL UL 1950 E132002 CSA CSA22.2-234 LR53 982C CSA22.2-950 EN 60950 20396-3336-1012 VDE IEC950 CE CE Mark (LVD) Environmental Total Power: 1200 Watts Input Voltages: 85-265 VAC No. of Outputs: Single Safety Astec Integrated Power America’s (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-966258 W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 58

Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 AMERICAS

5810 Van Allen Way

Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698

Ordering Information

Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Part Number Description Notes APA100-101 1200W Low Profile PFC Module For parallel operation the total input current must be <16A rms. APA100-103 950W Low Profile PFC Module Inrush current limited protection required APA100-102 1200W Low Power PFC Module Designed for parallel operation where the total input current >16A rms-requires external rail rectifiers APA100-104 1200W Low Profile PFC Module Input Output Control Pins 31-32. L1 21-22. +ve 1. RSV (Reserved) 33-34. L2 28-29. –ve 2. TEMP MON 3. C MON 4. C SHARE 5. CLK OUT 6. CLK IN 7. RSV (Reserved) 8. RSV (Reserved) 9. V ADJ 10. PFW ADJ 11. S GND 12. PFW 13. LD ENABLE 14. PF ENABLE Pin Assignments APA100 (PFC)Astec Integrated Power + O/P – O/P 85 to 265 Vac APA100-xxx Power Fail Warning Adjust 7 1 Load + SENSE – SENSE + O/P – O/P 385Vdc + I/P – I/P 6 1 + SENSE – SENSE + O/P – O/P + I/P – I/P 6 1 L2 AM80A-300L AM80A-300L THERMAL BASE PLATE*

4 INPUT PINS

14 CONTROL PINS

4 OUTPUT PINS

116.8 (4.60) 61.0 (2.40) AMPSSTM POWER MODULE 12.7 (0.50) C SHARE C SHARE CLK OUT CLK IN + O/P – O/P + O/P – O/P Output to AMPSS™ Modules 59www.astec.com W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 59