AP7315D-11FS4-7B

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 23

Technical content

Features

 Low VIN and Wide VIN Range: 1.7V to 5.25V  Guarantee Output Current,150mA  VOUT Accuracy ± 1%  Ripple Rejection 75dB at 1kHz  Low Output Noise, 60µVrms from 10Hz to 100kHz  Quiescent Current as Low as 35µA  VOUT Fixed 1.1V to 3.3V  Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)  Halogen and Antimony Free, Green Device (Note 3)

Applications

 Smart Phone/PAD  RF Supply  Cameras  Portable Video  Portable Media Player  Wireless Adapter  Wireless Communication Pin Assignments Pin 1 – VOUT, Pin 2 – GND, Pin 3 – EN, Pin 4 – VIN (Top View) (Top View) SOT23 (SA) SOT23 (SR) (Top View) SOT25 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Hal ogen- and Antimony-free,"Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (< 1500ppm total Br + Cl) and <1000ppm antimony compounds. 1 2 3 VIN GND EN/NC NCVOUT GND VIN VOUT VIN GND VOUT

Document number: DS38352 Rev. 1 - 2 2 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Typical Applications Circuit AP7315 VIN EN GND VOUT VIN VOUT CIN 0.47uF COUT 0.47uF Pin Descriptions Pin Name Pin Number Function X2- DFN1010-4 SOT25 SOT23 (SA) SOT23 (SR) VOUT 1 5 2 2 Power output pin GND 2 2 3 1 Ground EN 3 — — — Enable pin. Active high VIN 4 1 1 3 Power input pin — Thermal PAD — — — In PCB layout, prefer to use large copper area to cover this pad for better thermal dissipation, then connect this area to GND or leave it open. However, do not use it as GND electrode function alone. EN/NC — 3 — — Enable pin. Active high/ NC, No connection NC — 4 — — No connection Functional Block Diagram VIN EN GND VOUT Current Limit VREF VIN EN GND VOUT Current Limit VREF AP7315 (Non Discharge) AP7315D (With Discharge) CIN 0.47µ F COUT 0.47µ F

Document number: DS38352 Rev. 1 - 2 3 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Absolute Maximum Ratings (Note 4) (@TA = +25° C, unless otherwise specified.) Symbol Parameter Ratings Unit VIN Input Voltage 6.0 V VEN Input Voltage EN 6.0 V VOUT Output Voltage -0.3 to VIN +0.3 V IOUT Output Current 300 mA PD Power Dissipation 400 mW TA Operating Ambient Temperature -40 to +85 °C TSTG Storage Temperature -55 to +125 °C Note: 4. a). Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. internal power and ground planes and 2oz. copper traces on the top and bottom of the board. Recommended Operating Conditions (@TA = +25° C, unless otherwise specified.) Symbol Parameter Min Max Unit VIN Input Voltage 1.7 5.25 V IOUT Output Current 0 150 mA TA Operating Ambient Temperature -40 +85 °C

Document number: DS38352 Rev. 1 - 2 4 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Electrical Characteristics (VEN = VIN = VOUT +1.0V, CIN = COUT = 0.47µ F, IOUT = 1.0mA @TA = +25° C, unless otherwise specified.) Parameter Conditions Min Typ Max Units Input Voltage TA = -40° C to +85° C 1.7 — 5.25 V Output Voltage Accuracy (Note 11) VOUT ≥ 2.0V, VIN = VOUT+1V, TA = +25°C VOUT *0.99 VOUT VOUT *1.01 V VOUT < 2.0V, VIN = VOUT+1V, TA = +25°C VOUT - 20mV VOUT VOUT + 20mV V Load Regulation (dVOUT/VOUT/dIOUT) VIN = VOUT - Nom + 1.0V, IOUT = 1mA to 150mA — 0.5 1.0 %/A Quiescent Current (Note 6) IOUT = 0mA 20 35 60 μA IOUT = 150mA 30 60 100 ISTANDBY VEN = 0V (Disabled) — 0.01 1.0 μA Output Current — 150 — — mA Fold-back Short Current (Note 7) VOUT Short to Ground — 55 — mA PSRR (Note 8) VIN = (VOUT+1V)VDC + 0.2Vp-pAC, VOUT ≥ 1.8V, IOUT = 30mA f = 1kHz — 75 — dB Output Noise Voltage (Notes 8, 9) BW = 10Hz to 100kHz, IOUT = 30mA — 60 — µ Vrms Dropout Voltage (Note 5) IOUT = 150mA 1.1V ≤ VOUT < 1.5V — 0.50 0.64 V 1.5V ≤ VOUT < 1.7V — 0.38 0.49 1.7V ≤ VOUT < 2.0V — 0.34 0.44 2.0V ≤ VOUT < 2.5V — 0.28 0.38 2.5V ≤ VOUT < 2.8V — 0.22 0.32 2.8V ≤ VOUT ≤ 3.3V — 0.21 0.29 Output Voltage Temperature Coefficient IOUT = 30mA, TA = -40° C to +85° C — ± 30 — ppm/°C EN Input Low Voltage — 0 — 0.5 V EN Input High Voltage — 1.3 — 5.25 V EN Input Leakage VEN = 0, VIN = 5.0V or VEN = 5.0V, VIN = 0V -1.0 — +1.0 µA On Resistance of N-channel for Auto-Discharge (Note 10) VIN = 4.0V VEN = 0V (Disabled) — 30 — Ω Notes: 5. Dropout voltage is the voltage difference between the input and the output at which the output voltage drops 2% below its nominal value. 6. Quiescent current is defined here is the difference in current between the input and the output. 7. Short circuit current is measured with VOUT pulled to GND. 8. This specification is guaranteed by design. 9. To make sure lowest environment noise minimizes the influence on noise measurement. 10. AP7315 has 2 options for output, built-in discharge and non-discharge. 11. Potential multiple grades based on following output voltage accuracy .

Document number: DS38352 Rev. 1 - 2 5 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Typical Characteristics Output Noise (AP7315-33) 0.0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 0 100 200 300 400 500 Output Voltage VOUT (V) Output Current IOUT (mA) Output Voltage vs. Output Current AP7315-18 VIN=2.8V VIN=3.6V VIN=4.2V VIN=5V VIN=5.5V 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 100 200 300 400 500 Output Voltage VOUT (V) Output Current IOUT (mA) Output Voltage vs. Output Current AP7315-33 VIN=4.3V VIN=5V VIN=5.5V 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 100 200 300 400 500 Output Voltage VOUT (V) Output Current IOUT (mA) Output Voltage vs. Output Current AP7315-25 VIN=3.5V VIN=4.2V VIN=5V VIN=5.5V 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 1 2 3 4 5 Output Voltage VOUT (V) Input Voltage VIN (V) Output Voltage vs. Intput Voltage AP7315-25 IOUT=1mA IOUT=30mA IOUT=50mA 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 1 2 3 4 5 Output Voltage V OUT (V) Input Voltage VIN (V) Output Voltage vs. Intput Voltage AP7315-33 IOUT=1mA IOUT=30mA IOUT=50mA

Document number: DS38352 Rev. 1 - 2 6 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Typical Characteristics (Cont.) 0 1 2 3 4 5 Supply Current ISS (μA) Input Voltage VIN (V) Supply Current vs. Input Voltage AP7315-25 0 1 2 3 4 5 Supply Current ISS (μA) Input Voltage VIN (V) Supply Current vs. Input Voltage AP7315-33 2.45 2.46 2.47 2.48 2.49 2.50 2.51 2.52 2.53 2.54 2.55 -50 -25 0 25 50 75 100 Output Voltage VOUT (V) Temperature Topt (℃) Output Voltage vs. Temperature AP7315-25 3.25 3.26 3.27 3.28 3.29 3.30 3.31 3.32 3.33 3.34 3.35 -50 -25 0 25 50 75 100 Output Voltage VOUT (V) Temperature Topt (℃) Output Voltage vs. Temperature AP7315-33 -50 -25 0 25 50 75 100 Supply Current Iss (µ A) Temperature Topt (℃) Supply Current vs. Temperature AP7315-25 -50 -25 0 25 50 75 100 Supply Current Iss (µ A) Temperature Topt (℃) Supply Current vs. Temperature AP7315-33 Supply Current vs. Temperature AP7315-25 Supply Current vs. Temperature AP7315-33

Document number: DS38352 Rev. 1 - 2 7 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Typical Characteristics (Cont.) 100 150 200 250 300 0 25 50 75 100 125 150 Dropout Voltage VDIF (mV) Output Current IOUT (mA) Dropout Voltage vs. Output Current AP7315-25 85℃ 25℃ -40℃ 100 150 200 250 300 0 25 50 75 100 125 150 Dropout Voltage VDIF (mV) Output Current IOUT (mA) Dropout Voltage vs. Output Current AP7315-33 85℃ 25℃ -40℃ 100 150 200 250 300 350 400 450 -50 -25 0 25 50 75 100 Dropout Voltage VDIF (mV) Temperature Topt (℃) Dropout Voltage vs. Temperature AP7315-25 150mA 100mA 50mA 100 150 200 250 300 350 400 450 -50 -25 0 25 50 75 100 Dropout Voltage VDIF (mV) Temperature Topt (℃) Dropout Voltage vs. Temperature AP7315-33 150mA 100mA 50mA 100 120 100 1000 10000 100000 1000000 Ripple Rejection RR (dB) Frequency f (Hz) Ripple Rejection vs. Frequency AP7315-18 IOUT=1mA IOUT=30mA IOUT=150mA 100 100 1000 10000 100000 1000000 Ripple Rejection RR (dB) Frequency f (Hz) Ripple Rejection vs. Frequency AP7315-25 IOUT=1mA IOUT=30mA IOUT=150mA

Document number: DS38352 Rev. 1 - 2 8 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Typical Characteristics (Cont.) 100 120 100 1000 10000 100000 1000000 Ripple Rejection RR (dB) Frequency f (Hz) Ripple Rejection vs. Frequency AP7315-33 IOUT=1mA IOUT=30mA IOUT=150mA AP7315-25 Time t (µ s) Output Voltage Input Voltage 0 20 40 60 80 100 Output Voltage VOUT (V) 2.500 2.480 2.520 Input Voltage VIN (V) Output Voltage VOUT (V) AP7315-33 Time t (µ s) Output Voltage Input Voltage 0 20 40 60 80 100 3.300 3.280 3.320 Input Voltage VIN (V) AP7315-25 Time t (µ s) Output Voltage Output Current 50mA  100mA 0 20 40 60 80 100 Output Voltage VOUT (V) 2.50 2.45 2.55 2.40 150 100 VIN=3.5V tr=tf=0.5µ s Output Current IOUT (mA) AP7315-33 Time t (µ s) Output Voltage Output Current 50mA  100mA 0 20 40 60 80 100 Output Voltage VOUT (V) 3.30 3.25 3.35 150 100 3.20 VIN=4.3V tr=tf=0.5µ s Output Current IOUT (mA)

Document number: DS38352 Rev. 1 - 2 9 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Typical Characteristics (Cont.) AP7315-25 Time t (µ s) Output Voltage Output Current 1mA  150mA 0 20 40 60 80 100 Output Voltage VOUT (V) 2.50 2.30 2.70 300 150 2.10 Output Current IOUT (mA) VIN=3.5V tr=tf=0.5µ s AP7315-25 Time t (µ s) Output Voltage CE Input Voltage 0 40 80 120 160 200 Output Voltage VOUT (V) CE Input Voltage VCE (V) IOUT=0mA AP7315-25 Time t (µ s) Output Voltage CE Input Voltage 0 40 80 120 160 200 Output Voltage VOUT (V) CE Input Voltage VCE (V) IOUT=150mA AP7315-33 Time t (µ s) Output Voltage CE Input Voltage 0 40 80 120 160 200 Output Voltage VOUT (V) CE Input Voltage VCE (V) IOUT=0mA AP7315-33 Time t (µ s) Output Voltage CE Input Voltage 0 40 80 120 160 200 Output Voltage VOUT (V) CE Input Voltage VCE (V) IOUT=150mA AP7315-33 Time t (µ s) Output Voltage Output Current 1mA  150mA 0 20 40 60 80 100 Output Voltage VOUT (V) 300 150 3.30 3.10 3.50 2.90 Output Current IOUT (mA) VIN=4.3V tr=tf=0.5µ s 100

Document number: DS38352 Rev. 1 - 2 10 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Typical Characteristics (Cont.) AP7315D-18 Time t (µ s) Output Voltage CE Input Voltage 0 40 80 120 160 200 Output Voltage VOUT (V) CE Input Voltage VCE (V) IOUT=0mA AP7315D-18 Time t (µ s) Output Voltage CE Input Voltage 0 40 80 120 160 200 Output Voltage VOUT (V) CE Input Voltage VCE (V) IOUT=150mA AP7315D-33 Time t (µ s) Output Voltage CE Input Voltage 0 40 80 120 160 200 Output Voltage VOUT (V) CE Input Voltage VCE (V) IOUT=0mA AP7315D-33 Time t (µ s) Output Voltage CE Input Voltage 0 40 80 120 160 200 Output Voltage VOUT (V) CE Input Voltage VCE (V) IOUT=150mA

Document number: DS38352 Rev. 1 - 2 11 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT

Application Information

An output capacitor (C OUT) is needed to improve transient response and maintain stability. The AP7315 is stable with very small ceramic output capacitors. The ESR (equivalent series resistance) and capacitance drives the selection. If the application has large load variations, it is recommended to utilize low -ESR bulk capacitors. It is recommended to plac e ceramic capacitors as close as possible to the load and the ground pin and care should be taken to reduce the impedance in the layout. Input Capacitor To prevent the input voltage from dropping during load steps it is recommended to utilize an input capacitor (C IN). A minimum 0.47μF ceramic capacitor is recommended between VIN and GND pins to decouple input p ower supply glitch. This input capacitor must be located as close as possible to the device to assure input stability and reduce noise. For PCB layout, a wide copper trace is required for both VIN and GND pins. Enable Control The AP7315 is turned on by setting the EN pin high, and is turned off by pulling it low. If this feature is not used, the EN pin should be tied to VIN pin to keep the regulator output on at all time. To ensure proper operation, the signal source used to drive the EN pin must be able to swing above and below the specified turn-on/off voltage thresholds listed in the Electrical Characteristics section. Short Circuit Protection When VOUT pin is short-circuit to GND, short circuit protection will be triggered and clamp the output current to approximately 60mA. This feature protects the regulator from over-current and damage due to overheating. Layout Considerations For good ground loop and stability, the input and output capacitors should be located close to the VIN, VOUT, and GND pins of the device. The regulator GND pin should be connected to the external circuit ground to reduce voltage drop caused by trace impedance. Ground plane is generally used to reduce trace impedance. Wide trace should be used for large current paths from VIN to VOUT, and load circuit. ESR vs. Output Current Ceramic type output capacitor is recommended for this series; however, the other output capacitors with low ESR also can be u sed. The relations between IOUT (Output Current) and ESR of an output capacitor are shown below. The stable region is marked as the hatched area in the graph. Measurement conditions: Frequency Band: 10Hz to 2MHz, Temperature: -40° C to +85° C 0.001 0.01 0.1 100 0 25 50 75 100 125 150 ESR (Ω) Output Current IOUT (mA) ESR vs. Output Current AP7315-18 -40° C 85° C Stable Range 0.001 0.01 0.1 100 0 25 50 75 100 125 150 ESR (Ω) Output Current IOUT (mA) ESR vs. Output Current AP7315-33 -40° C 85° C Stable Range

Document number: DS38352 Rev. 1 - 2 12 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Ordering Information (Note 12) AP7315X - XXX XXX - XX Output VoltageOutput Discharge 11 : 1.1V Packing 7: Tape & Reel FS4: X2-DFN1010-4 Package Code 185 : 1.85V W5: SOT25 SA: SOT23 SR: SOT23 7B: Tape & ReelBlank: Non Discharge D: Discharge 12 : 1.2V 135 : 1.35V 15 : 1.5V 18 : 1.8V 22 : 2.2V 23 : 2.3V 25 : 2.5V 26 : 2.6V 28 : 2.8V 285 : 2.85V 295 : 2.95V 30 : 3.0V 31 : 3.1V 32 : 3.2V 33 : 3.3V 29 : 2.9V Part Number Package Code Packaging 7” Tape and Reel Quantity Part Number Suffix AP7315-XXXFS4-7B FS4 X2-DFN1010-4 10000/Tape & Reel -7B AP7315D-XXXFS4-7B FS4 X2-DFN1010-4 10000/Tape & Reel -7B AP7315-XXXW5-7 W5 SOT25 3000/Tape & Reel -7 AP7315D-XXXW5-7 W5 SOT25 3000/Tape & Reel -7 AP7315-XXXSA-7 SA SOT23 3000/Tape & Reel -7 AP7315-XXXSR-7 SR SOT23 3000/Tape & Reel -7

Document number: DS38352 Rev. 1 - 2 13 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Marking Information (1) X2-DFN1010-4 ( Top View ) XXX Y : Year : 0~9 X : Internal Code XXX : Identification Code W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week Y W X Part Number Package Identification Code AP7315-11FS4-7B X2-DFN1010-4 15A AP7315-12FS4-7B X2-DFN1010-4 15B AP7315-135FS4-7B X2-DFN1010-4 15C AP7315-15FS4-7B X2-DFN1010-4 15D AP7315-18FS4-7B X2-DFN1010-4 15E AP7315-185FS4-7B X2-DFN1010-4 15F AP7315-22FS4-7B X2-DFN1010-4 15G AP7315-23FS4-7B X2-DFN1010-4 15H AP7315-25FS4-7B X2-DFN1010-4 15J AP7315-26FS4-7B X2-DFN1010-4 15K AP7315-28FS4-7B X2-DFN1010-4 15M AP7315-285FS4-7B X2-DFN1010-4 15N AP7315-295FS4-7B X2-DFN1010-4 15P AP7315-30FS4-7B X2-DFN1010-4 15R AP7315-31FS4-7B X2-DFN1010-4 15S AP7315-32FS4-7B X2-DFN1010-4 15T AP7315-33FS4-7B X2-DFN1010-4 15U AP7315D-11FS4-7B X2-DFN1010-4 5DA AP7315D-12FS4-7B X2-DFN1010-4 5DB AP7315D-135FS4-7B X2-DFN1010-4 5DC AP7315D-15FS4-7B X2-DFN1010-4 5DD AP7315D-18FS4-7B X2-DFN1010-4 5DE AP7315D-185FS4-7B X2-DFN1010-4 5DF AP7315D-22FS4-7B X2-DFN1010-4 5DG AP7315D-23FS4-7B X2-DFN1010-4 5DH AP7315D-25FS4-7B X2-DFN1010-4 5DJ AP7315D-26FS4-7B X2-DFN1010-4 5DK AP7315D-28FS4-7B X2-DFN1010-4 5DM AP7315D-285FS4-7B X2-DFN1010-4 5DN AP7315D-29FS4-7B X2-DFN1010-4 5DP AP7315D-295FS4-7B X2-DFN1010-4 5DR AP7315D-30FS4-7B X2-DFN1010-4 5DS AP7315D-31FS4-7B X2-DFN1010-4 5DT AP7315D-32FS4-7B X2-DFN1010-4 5DU AP7315D-33FS4-7B X2-DFN1010-4 5DV (Top View)

Document number: DS38352 Rev. 1 - 2 14 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Marking Information (Cont.) (2) SOT25 1 2 3 (Top View) XXX : Identification Code W : Week : A to Z : 1 to 26 week; X : Internal Code Y : Year 0 to 9 a to z : 27 to 52 week; z represents 52 and 53 week XXX Y W X Part Number Package Identification Code AP7315-11W5-7 SOT25 15A AP7315-12W5-7 SOT25 15B AP7315-135W5-7 SOT25 15C AP7315-15W5-7 SOT25 15D AP7315-18W5-7 SOT25 15E AP7315-185W5-7 SOT25 15F AP7315-22W5-7 SOT25 15G AP7315-23W5-7 SOT25 15H AP7315-25W5-7 SOT25 15J AP7315-26W5-7 SOT25 15K AP7315-28W5-7 SOT25 15M AP7315-285W5-7 SOT25 15N AP7315-295W5-7 SOT25 15P AP7315-30W5-7 SOT25 15R AP7315-31W5-7 SOT25 15S AP7315-32W5-7 SOT25 15T AP7315-33W5-7 SOT25 15U AP7315D-11W5-7 SOT25 5DA AP7315D-12W5-7 SOT25 5DB AP7315D-135W5-7 SOT25 5DC AP7315D-15W5-7 SOT25 5DD AP7315D-18W5-7 SOT25 5DE AP7315D-185W5-7 SOT25 5DF AP7315D-22W5-7 SOT25 5DG AP7315D-23W5-7 SOT25 5DH AP7315D-25W5-7 SOT25 5DJ AP7315D-26W5-7 SOT25 5DK AP7315D-28W5-7 SOT25 5DM AP7315D-285W5-7 SOT25 5DN AP7315D-29W5-7 SOT25 5DP AP7315D-295W5-7 SOT25 5DR AP7315D-30W5-7 SOT25 5DS AP7315D-31W5-7 SOT25 5DT AP7315D-32W5-7 SOT25 5DU AP7315D-33W5-7 SOT25 5DV

Document number: DS38352 Rev. 1 - 2 15 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Marking Information (Cont.) (3) SOT23 (Top View) XXX : Identification Code W : Week : A to Z : 1 to 26 week; X : Internal Code Y : Year 0 to 9 a to z : 27 to 52 week; z represents 52 and 53 week1 2 XXX Y W X Part Number Package Identification Code AP7315-11SA-7 SOT23 15A AP7315-12SA-7 SOT23 15B AP7315-135SA-7 SOT23 15C AP7315-15SA-7 SOT23 15D AP7315-18SA-7 SOT23 15E AP7315-185SA-7 SOT23 15F AP7315-22SA-7 SOT23 15G AP7315-23SA-7 SOT23 15H AP7315-25SA-7 SOT23 15J AP7315-26SA-7 SOT23 15K AP7315-28SA-7 SOT23 15M AP7315-285SA-7 SOT23 15N AP7315-295SA-7 SOT23 15P AP7315-30SA-7 SOT23 15R AP7315-31SA-7 SOT23 15S AP7315-32SA-7 SOT23 15T AP7315-33SA-7 SOT23 15U AP7315-11SR-7 SOT23 5DA AP7315-12SR-7 SOT23 5DB AP7315-135SR-7 SOT23 5DC AP7315-15SR-7 SOT23 5DD AP7315-18SR-7 SOT23 5DE AP7315-185SR7 SOT23 5DF AP7315-22SR-7 SOT23 5DG AP7315-23SR-7 SOT23 5DH AP7315-25SR-7 SOT23 5DJ AP7315-26SR-7 SOT23 5DK AP7315-28SR-7 SOT23 5DM AP7315-285SR-7 SOT23 5DN AP7315-295SR-7 SOT23 5DR AP7315-30SR-7 SOT23 5DS AP7315-31SR-7 SOT23 5DT AP7315-32SR-7 SOT23 5DU AP7315-33SR-7 SOT23 5DV

Document number: DS38352 Rev. 1 - 2 16 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. (1) Package Type: X2-DFN1010-4 X2-DFN1010-4 Dim Min Max Typ A - 0.40 0.39 A1 0.00 0.05 0.02 A3 - - 0.13 b 0.20 0.30 0.25 D 0.95 1.05 1.00 D2 0.38 0.58 0.48 E 0.95 1.05 1.00 E2 0.38 0.58 0.48 e - - 0.65 L 0.20 0.30 0.25 L1 0.27 0.37 0.32 L2 0.02 0.12 0.07 Z - - 0.050 All Dimensions in mm A D E Z b e L L2E2 C0.25 C0.18(3x) Seating Plane

Document number: DS38352 Rev. 1 - 2 17 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Package Outline Dimensions (All dimensions in mm.) (2) Package Type: SOT23 2.300(0.091) 2.500(0.098) 1.200(0.047) 1.400(0.055) 0.890(0.035) 1.030(0.041) 0.300(0.012) 0.510(0.020) 1.900(0.075)REF 2.800(0.110) 3.000(0.118) 2.0° 3.0 ° 0.500(0.020) 0.700(0.028) 1.050(0.041)REF 0.010(0.0004) 0.100(0.004) 0.900(0.035) 1.100(0.043) 4×R0.100(0.004) 7.0° 7.0° 0.550(0.022)REF 0.200(0.008)MIN 0.100(0.004) GAUGE PLANE 0.080(0.003) 0.180(0.007) R0.100(0.004) 0.0°~10.0°

Document number: DS38352 Rev. 1 - 2 18 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Package Outline Dimensions (All dimensions in mm.) (3) Package Type: SOT25 2.820(0.111) 2.650(0.104) 1.500(0.059) 0.000(0.000) 0.300(0.012) 0.950(0.037) 0.900(0.035) 0.100(0.004) 0.200(0.008) 0.300(0.012) 3.100(0.122) 1.700(0.067) 3.000(0.118) 0.500(0.020) 0.150(0.006) 1.300(0.051) 0.200(0.008) 0.600(0.024) 1.800(0.071) 2.000(0.079) 0.700(0.028) REF TYP 1.450(0.057) M AX

Document number: DS38352 Rev. 1 - 2 19 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. (1) Package Type: X2-DFN1010-4 Dimensions Value (in mm) C 0.650 X 0.250 X1 0.480 X2 0.900 X3 0.070 Y 0.400 Y1 0.470 Y2 0.220 Y3 0.480 Y4 1.300 Y5 0.180 C X Y

Document number: DS38352 Rev. 1 - 2 20 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Suggested Pad Layout (Cont.) (2) Package Type: SOT23 Y GZ Y X E Grid placement courtyard Dimensions Z (mm)/(inch) G (mm)/(inch) X (mm)/(inch) Y (mm)/(inch) E (mm)/(inch)

Document number: DS38352 Rev. 1 - 2 21 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Suggested Pad Layout (Cont.) (3) Package Type: SOT25 Y X G Z Dimensions Z (mm)/(inch) G (mm)/(inch) X (mm)/(inch) Y (mm)/(inch) (mm)/(inch) (mm)/(inch)

Document number: DS38352 Rev. 1 - 2 22 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT Tape Orientation For AP7315-XXXFS4-7B & AP7315D-XXXFS4-7B

Document number: DS38352 Rev. 1 - 2 23 of 23 www.diodes.com December 2015 © Diodes Incorporated AP7315 NEW PRODUCT IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other c hanges without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license unde r its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diod es Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product nam es and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this d ocument is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support device s or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety -critical, life support devices or systems, notwithstanding any devices - or systems -related information or support that may be provided by Diodes Incorporated. Further, Cu stomers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com