AP2D207SZBE

AP2D207SZBE CK-COMPONENTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Specifications and dimensions subject to change www.ck-components.com APu shbu tt on

12 Feb 14

• IP67 sealed
• 1,000,000 life cycle
• Illumination / non-illumination
• Multiple colored caps
• Threaded or snap-in mounting
• Caps available separately
• RoHS compliant Typical Applications
• Harsh environments
• Off-Road
• Industrial
• Medical
• Transportation
• Joystick control modules
• Gaming
• Military Specifications FUNCTION: SPST Momentary CONTACT ARRANGEMENT: N.O. MOUNTING TYPE: Snap-in (no panel seal) Threaded body (hex nut, lock washer, and panel seal gasket provided) Torque spec for threaded body: Do not exceed 8-9 in-lbs (0.9-1.0 N.m) Mechanical OPERATING LIFE: 1,000,000 cycles TOTAL TRAVEL: 2.1 ± 0.2 mm OPERATING POINT 1.55 ± 0.25 mm OVER TRAVEL: 0.6 min. OPERATING FORCE: 4N ± 1N standard configuration; other force option 2N ± 0.5N VIBRATION: 10-500 Hz 10g Max SHOCK: 60g 11ms sawtooth wave Electrical CONTACT RATING: 200mA @ 24 V DC resistive (500,000 cycles) 100mA @ 50 V DC resistive (500,000 cycles) 400mA @ 32 V AC resistive (500,000 cycles) 125mA @ 125 V AC resistive (1,000,000 cycles) DIELECTRIC STRENGTH: 1000 V AC min. INSULATION RESISTANCE: 1 G Ω @ 500 VDC INITIAL CONTACT RESISTANCE 50 mΩ max (without wire leads) BOUNCE TIME: <5 ms Materials HOUSING: PBT BASE: PBT CAP: PBT ACTUATOR: Illuminated: Clear polycarbonate Non-illuminated: PBT INTERNAL SEAL: Silicone rubber TERMINALS: Copper alloy, gold over silver plating MOVABLE CONTACT: Copper alloy, gold over silver plating TERMINAL SEAL: Epoxy WIRE LEADS: UL1569 Black 22 AWG Operating Environment OPERATING TEMPERATURE: -40˚C to 85˚C (+105˚C non-illuminated) ESD PROTECTION: 20 KV min. Process Environment SEALING: IP67 for threaded body IP65 for snap-in version (no panel seal) NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Designation AP AP Series B EPA AP Series Industrial Pushbutton Switch Operating Force 2 2 Newtons 4 4 Newtons Actuator Style D Dome / Convex C Concave E Extended Dome N None Actuator Color

0 No Cap

2 Black

3 Red

4 Orange

5 Yellow

6 Green

7 Blue

9 Gray

00 No LED*

01 Super White

02 Bi-color; Red (Green)

03 Red

05 Amber

06 Green

07 Super Blue

08 Bi-color; Amber (Green)

• No LED available in short body only Contact Material B Gold Terminal Seal E Epoxy All models are epoxy sealed Termination Z Solder Lug W 12” Wire Leads 22 AWG C* PC Terminals Bushing Style S Snap-in plastic T Threaded plastic No panel seal option *** PC terminals not available with illumination Contact Customer Service for additional hardware options. Please contact Customer Service for additional colors and paint / laser etched button options.

Dimensions are shown: mm (inches Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Industrial Pushbutton Switch STANDARD VIEW ø 17, 40 [0.685] ø 12, 35 [0.486] 1 2 SPST-NO 3 4 SEE SCHEMATIC 1 2 ELECTRICAL SCHEMATIC10,90 0.429[] 1,50 0.059[] 4,20 0.165[] 7,74 0.305[] 8,80 0.346[] 28,00 1.102[] 3,90 0.154[] 5,45 0.215[] 4,50 0.177[] TYP3,54 0.140[] TYP1,64 0.065[] TYP7,74 0.305[] TYP3,54 0.140[] TYP1,64 0.065[] TYP7,74 0.305[] TYP2,09 0.082[] TYP3,99 0.157[] 0,65 0.026[] TYP8,19 0.323[] DOWN POSITION Third Angle Projection D DOME / CONVEX E EXTENDED DOME C CONCAVE OPERATING FORCE ACTUATOR COLOR OPTION CODE OPERATING FORCE 2 2 N, 200 g 4 4 N, 400 g For additional colors please contact Customer Service.

B ø A PANEL THICKNESS DIM A (± 0.05 mm) DIM B (± 0.05 mm) 1 mm [0.039 in] 13.70 mm [0.539 in] 13.00 mm [0.512 in] 2 mm [0.079 in] 13.80 mm [0.539 in] 13.00 mm [0.512 in] 3 mm [0.118 in] 13.90 mm [0.547 in] 13.10 mm [0.516 in] THREADED BODY MIN PANEL THICKNESS 1 mm 13.70 mm [0.539 in] 13.00 mm [0.512 in] PANEL CUTOUT A 0.1mm min. chamfer on the leading edge of the mounting hole is recommended for snap-in version. AP Series Industrial Pushbutton Switch ILLUMINATION 28,00 1.102[] 20,25 0.797[] 1,50 0.059[] 7,74 0.305[] 0,85 0.033[] 16,25 0.640[] 24,00 0.945[] 1,50 0.059[] 7,75 0.305[] 0,85 0.033[] M13 X 1.25-6g THREADED WITH ILLUMINATION SNAP-IN NO ILLUMINATION THREADED NO ILLUMINATION M13 X 1.25-6g SNAP-IN WITH ILLUMINATION *LED FORWARD CURRENT: 20 mA LED FORWARD VOLTAGE: see chart above LED REVERSE VOLTAGE: 5.0 V MAX * For information on specific and custom LED, please contact Customer Service. S SNAP-IN T THREADED PLASTIC BUSHING STYLE

07 LED Super Blue

08 LED Bi-Color – Amber (Green)

02 LED Bi-Color – Red (Green)

00 Model without illumination

01 LED Super White

03 LED Red

05 LED Amber

06 LED Green

800 1,500 10 10 10 20 TYPICAL INTENSITY* MIN MAX 35 50 (mcd) 4,000 5,000 35 50 PEAK WAVELENGTH (nm) N/A 700 610 565 N/A 470 N/A Vf Forward Voltage 2.0 2.0 2.0 2.0 3.5 3.8 2.0 Third Angle Projection + Anode - Cathode NOTE: For bi-color LED’s the polarity must be reversed to alternate the color A-112 APu shbu tt on Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ck-components.com12 Feb 14

Dimensions are shown: mm (inches Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A ø 11 ,11 [0.437] 34,78 TYP [1.369] 27,04 TYP [1.065] 304,81 [12.000] WIRELEADS

22 AWG STD

304,81 [12.000] WIRELEADS 20,69 TYP [0.815] 28,44 TYP [1.120] ø 1 1,11 [0.437] 304,81 [12.000] WIRELEADS 304,81 [12.000] WIRELEADS POTTED BASE, SNAP-IN ILLUMINATION WIRE LEADS WITH POTTED BASE, SNAP-IN NO ILLUMINATION WIRE LEADS WITH POTTED BASE, THREADED ILLUMINATION WIRE LEADS WITH POTTED BASE, THREADED NO ILLUMINATION AP Series Industrial Pushbutton Switch TERMINATION Third Angle Projection 5,65 TYP [0.222] 0,50 TYP [0.020] 3,90 [0.154] 2,83 TYP [0.111] 2,83 TYP [0.111] 2,75 [0.108] 6,44 TYP [0.254] 0,75 TYP [0.030] 2,04 TYP [0.080] 0,50 TYP [0.020] LED TERMINAL ANODE (+) LED TERMINAL CATHODE (-) LED TERMINAL ANODE (+) LED TERMINAL CATHODE (-) 5,70 [0.224] 2X ø 1,00 [0.039] 0,50 [0.020] 0,70 [0.028] 2,50 TYP [0.098] 5,65 TYP [0.222] PCB HOLE PATTERN BOARD VIEW Z SOLDER LUG C PC TERMINALS W 12” WIRE LEADS 22 AWG *** Illumination not available with PC Terminals

• Switching terminals are gold and LED terminals are silver Wires: Black wires - Terminals Red wires - LED (+) Positive White wire - LED (-) Negative

Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on ø 17.25 0.77 13.82 AP Series Industrial Pushbutton Switch HARDWARE Third Angle Projection LOCK WASHER Part Number 647D00000 15.90 2.40 ø 15.90 REF18.36 M13 X 1.25-6H CONTACT MATERIAL TERMINAL SEAL B GOLD E EPOXY All models are epoxy sealed OPTION CODE CONTACT MATERIAL B Gold HEX NUT Part number 515D00000 A A

0.56 REF

2 X ø 14.60 2 X ø 16.30 ø 17 .00 ø 13.80 0.304X 0.13 4X R 0.13 REF See Detail A Detail A Scale 15:1 PANEL SEAL Part Number 655D00000 Caps available on next page

Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Industrial Pushbutton Switch PART NUMBER HOLE STYLE 481DXX000 NO DOME 481DXX001 YES DOME 481DXX002 NO CONCAVE 481DXX003 YES CONCAVE 481DXX004 NO EXTENDED DOME 481DXX005 YES EXTENDED DOME OPTION CAP COLOR

01 WHITE

02 BLACK

04 ORANGE

05 YELLOW

07 BLUE

08 BROWN

09 GRAY

6.10 ø 12.35 ø THRU HOLE 3.00 6.25 6.10 ø 12.35 ø THRU HOLE 3.00 6.15 0.61 6.69 ø 12.35 THRU HOLE 0.65 6.69 ø 3.00 DOME 481DXX000 = NO HOLE 481DXX001 = HOLE 481D XX XXX Cap Color Style EXTENDED DOME 481DXX002 = NO HOLE 481DXX003 = HOLE CONCAVE 481DXX004 = NO HOLE 481DXX005 = HOLE