A44CCOL NVENT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Mounting options Pedestals and Pedestal a ccessories nVent.com/HOFFMAN SUBJECT TO CHANGE WITHOUT NOTICEHMi (HuMan-Mac Hine interface)1 Spec-00485 L Spec-00485 pedestals Pedestals enable many types of enclosures and boxes to be floor mounted. Four columns and two bases are available. Columns can be mounted on either base, through the vertical column or directly to the enclosure. A cutout must be made in the enclosure if the wires are to come through the column. Columns have flanges at each end and a gasketed access plate. Screws, oil-resistant gaskets and box connector fitting are furnished with each column for joining an enclosure to the top of the column. Columns are 14 gauge steel with 10 gauge flanges. bases have leveling screws and holes for bolting to the floor. Finish on bases and columns is ANSI 61 gray polyester powder coating over pretreated surfaces. Bases and columns must be ordered separately. The user would normally remove the mounting brackets from the enclosure if the enclosure is mounted on a pedestal. Hoffman can supply enclosures without mounting brackets and with cutouts. Consult Hoffman for more information. Bulletin: p 1 Catalog Number AxBxC mm/in. Description C mm/in. D mm/in. F mm/in. H mm/in. M mm/in. N mm/in. P mm/in. S mm/in. T mm/in. A44CCOL 889 x 102 x 102 35.00 x 4.00 x 4.00 Straight Pedestal Column — 3.75 2.75 184 7.25 152 6.00 A44PBCOL 1041 x 102 x 102 41.00 x 4.00 x 4.00 Angled Pedestal Column — 3.75 2.75 184 7.25 152 6.00 2.75 2.06 A66CCOL 889 x 152 x 152 35.00 x 6.00 x 6.00 Straight Pedestal Column — 146 5.75 121 4.75 203 8.00 171 6.75 A66PBCOL 1041 x 152 x 152 41.00 x 6.00 x 6.00 Angled Pedestal Column — 146 5.75 121 4.75 203 8.00 171 6.75 2.88 1.12 A18SBASE 457 x 457 18.00 x 18.00 Pedestal Base 457 18.00 1.00 .62 A24SBASE 610 x 610 24.00 x 24.00 Pedestal Base 610 24.00 1.12 .69
Mounting options Pedestals and Pedestal a ccessories PH 763.422.2211nVent.com/HOFFMAN HMi (HuMan-Mac Hine interface) 2 Spec-00485 L pedestal wit H legs Pedestal is available in two heights. Vertical tube has rigid one-piece construction. Bottom of tube is open. Four sturdy, die-cast legs bolt to vertical tube. Legs have holes for bolting pedestal to the floor. Legs will accept casters in limited applications. Heavy-duty black polymer caps fit on ends of legs to cover bolts or levelers. Pedestal has ANSI 61 medium-gray or RAL 7035 textured light-gray polyester powder paint finish. Tapped mounting holes in the top of pedestal allow attachment to HMI base with cutout, swivel, swivel tilt or angle adapter. Hardware and gasket to attach enclosure are included.
- Use 4.00 x 4.00-in. (102 x 102-mm) pedestal with CONCEPT HMI and INLINE HMI Enclosures
- Use 8.00 x 8.00-in. (203 x 203- mm) pedestal with PROLINE Sloped-Front Enclosures Bulletin: p 1 Catalog Number AxBxC mm/in. Finish Description D mm/in. AP26L44 660 x 102 x 102 26.00 x 4.00 x 4.00 ANSI 61 Steel 600 23.62 AP26L44LG 660 x 102 x 102 26.00 x 4.00 x 4.00 RAL 7035 Steel 600 23.62 AP36L44 914 x 102 x 102 36.00 x 4.00 x 4.00 ANSI 61 Steel 600 23.62 AP36L44LG 914 x 102 x 102 36.00 x 4.00 x 4.00 RAL 7035 Steel 600 23.62 AP26L88 660 x 203 x 203 26.00 x 8.00 x 8.00 ANSI 61 Steel 702 27.62 AP26L88LG 660 x 203 x 203 26.00 x 8.00 x 8.00 RAL 7035 Steel 702 27.62 AP36L88 914 x 203 x 203 36.00 x 8.00 x 8.00 ANSI 61 Steel 702 27.62 AP36L88LG 914 x 203 x 203 36.00 x 8.00 x 8.00 RAL 7035 Steel 702 27.62 87799590 pedestal Mount pedestal to the floor or on accessory swivel casters. Coupling and base have RAL 7035 light-gray polyester powder paint finish. Anodized aluminum tube is 1000-mm high with a 45- x 60- mm tube cross section. The enclosure coupling has a 60- x 60-mm hole pattern. Bulletin: cc 3 Catalog Number Description CCPED Floor-mount pedestal or mount to swivel casters
Mounting options Pedestals and Pedestal a ccessories nVent.com/HOFFMAN SUBJECT TO CHANGE WITHOUT NOTICEHMi (HuMan-Mac Hine interface)3 Spec-00485 L Bolt-down pedestal Bolt-Down Pedestal is available in two heights. The vertical tube has rigid one-piece construction. Rigid cast aluminum base flanges bolt to the vertical tube. Pedestal has ANSI 61 medium-gray or RAL 7035 textured light-gray polyester powder paint finish. Tapped mounting holes in the top of pedestal allow attachment to operator interface base with cutout, swivel, swivel tilt or angle adapter. Hardware and gasket to attach enclosure are included.
- Use 4.00 x 4.00-in. (102 x 102-mm) pedestal with CONCEPT HMI and INLINE HMI Enclosures
- Use 8.00 x 8.00-in. (203 x 203- mm) pedestal with PROLINE Sloped-Front Enclosures Bulletin: p 1 Catalog Number AxBxC mm/in. Finish Description D mm/in. E mm/in. AP23B44 584 x 102 x 102 23.00 x 4.00 x 4.00 ANSI 61 Steel 159 6.26 133 5.25 AP23B44LG 584 x 102 x 102 23.00 x 4.00 x 4.00 RAL 7035 Steel 159 6.26 133 5.25 AP33B44 838 x 102 x 102 33.00 x 4.00 x 4.00 ANSI 61 Steel 159 6.26 133 5.25 AP33B44LG 838 x 102 x 102 33.00 x 4.00 x 4.00 RAL 7035 Steel 159 6.26 133 5.25 AP23B88 584 x 203 x 203 23.00 x 8.00 x 8.00 ANSI 61 Steel 260 10.25 235 9.25 AP23B88LG 584 x 203 x 203 23.00 x 8.00 x 8.00 RAL 7035 Steel 260 10.25 235 9.25 AP33B88 838 x 203 x 203 33.00 x 8.00 x 8.00 ANSI 61 Steel 260 10.25 235 9.25 AP33B88LG 838 x 203 x 203 33.00 x 8.00 x 8.00 RAL 7035 Steel 260 10.25 235 9.25 extension Pedestal Extension can be used with pedestals to provide additional 6 in. (152 mm) of height for standing position. ANSI 61 medium-gray polyester powder paint or RAL 7035 textured light-gray polyester powder paint. Bulletin: p 1 Catalog Number AxBxC in./mm Finish Description APE688 6.00 x 8.00 x 8.00 152 x 203 x 203 ANSI 61 Steel APE688LG 6.00 x 8.00 x 8.00 152 x 203 x 203 RAL 7035 Steel
Mounting options Pedestals and Pedestal a ccessories PH 763.422.2211nVent.com/HOFFMAN HMi (HuMan-Mac Hine interface) 4 Spec-00485 L stainless s teel pedestal Pedestal is 36-in. (914-mm) tall and provides optimal viewing and operating height. Tube is 14 gauge Type 304 one-piece construction. Legs are 7 gauge Type 304 for rigidity. Cable access plate and leg levelers are included. Leg levelers can be removed for anchoring pedestal to floor. Pedestal has smooth vertical brushed finish. Pedestal will accept pedestal accessories that are not stainless steel. These include swivel tilt, swivel and angle adapters. Bulletin: p 1S Catalog Number A in./mm Description AP36SS 36.00 914 Stainless steel stainless s teel e xtension Pedestal Extension can be ordered separately to provide additional 6 in. (152 mm) of height for standing position. Extension is 14 gauge Type 304 stainless steel with a smooth brushed finish. Extension will accept pedestal accessories that are not stainless steel. These include swivel tilt, swivel and angle adapters. Bulletin: p 1S Catalog Number Description APE6SS Stainless steel
Mounting options Pedestals and Pedestal a ccessories nVent.com/HOFFMAN SUBJECT TO CHANGE WITHOUT NOTICEHMi (HuMan-Mac Hine interface)5 Spec-00485 L swivel t ilt The use of a combination swivel and tilt mechanism allows a machine operator to rotate and also tilt an HMI enclosure for optimum viewing and safe operation. The Swivel Tilt is designed for use between the bottom of an HMI enclosure and a pedestal (enclosure reinforcement may be required). do not use the s wivel tilt between an overhead support and an enclosure. The swivel feature allows maximum rotation of 350 degrees. Integral stops are provided at 30-degree increments between 60 degrees and 180 degrees of rotation. Swivel can be locked in any position. Tilt feature allows forward and backward movement up to 30 degrees from horizontal. Tilt lock has a large release knob that allows quick incremental adjustment. Top and bottom flanges allow easy installation on pedestals. A large center opening accommodates control cables that have attached plugs. Swivel Tilt is cast aluminum with an anodized finish. Mounting hardware and gaskets are furnished. Bulletin: p 1 Catalog Number AxBxC mm/in. Maximum Enclosure Size A x B x C mm/in. Maximum Load Including Enclosure (kg) Maximum Load Including Enclosure (lb.) AST44 148 x 102 x 102 5.81 x 4.00 x 4.00 610 x 610 x 406 24.00 x 24.00 x 16.00 34.0 75 AST88 203 x 203 x 203 8.00 x 8.00 x 8.00 838 x 610 x 610 33.0 x 24.00 x 24.00 68.0 150 The loads listed assume that the additional load is centered on the front or back of the enclosure. Please contact Hoffman for specific application information. swivel A swivel mechanism can be used to provide a machine operator a way to easily rotate an operator interface enclosure to a convenient operating position. Maximum rotation is 350 degrees. The low- profile swivel has a large center opening in addition to a large, wobble-free bearing surface. Swivel mechanism can be locked in any position. The swivel mechanism is designed for use between the bottom of an operator interface enclosure and a pedestal. do not use the s wivel between an overhead support and an enclosure. The Swivel is cast aluminum with an anodized finish. Mounting hardware and gaskets are furnished. Integral stops are provided at 30-degree increments between 60 degrees and 180 degrees of rotation on catalog number ASWV88 only. Bulletin: p 1 Catalog Number AxBxC mm/in. Maximum Enclosure Size A x B x C mm/in. Maximum Load Including Enclosure (kg) Maximum Load Including Enclosure (lb.) ASWV44 27 x 102 x 102 1.06 x 4.00 x 4.00 610 x 610 x 406 24.00 x 24.00 x 16.00 45.4 100 ASWV88 33 x 203 x 203 1.28 x 8.00 x 8.00 838 x 610 x 610 33.00 x 24.00 x 24.00 90.7 200 The loads listed assume that the additional load is centered on the front or back of the enclosure. Please contact Hoffman for specific application information.
Mounting options Pedestals and Pedestal a ccessories PH 763.422.2211nVent.com/HOFFMAN HMi (HuMan-Mac Hine interface) 6 Spec-00485 L angle adapter Angle Adapter fits top of pedestal and provides a fixed tilt of 15 degrees from horizontal for enclosure mounting. Angle Adapter is aluminum with large cable opening and has clear anodized aluminum finish. Mounting hardware is included. Bulletin: p 1 Catalog Number Fits AAA1544 4 x 4 pedestal AAA1588 8 x 8 pedestal Handles Handles attach to sides, top or bottom of sloped front to provide maximum operator control when using the suspension system, swivel or swivel tilt. Location dimples on the sides of sloped fronts indicate drill-hole location for standard mounting. Handles attach inside enclosure. Bulletin: p 1 Catalog Number Description Fits PUHK (2) die-cast aluminum handles (9.75 in./248 mm) PROLINE Sloped-Fronts PUHKA (2) tubular steel handles with soft coating (9.75 in./248 mm) PROLINE Sloped-Fronts pedestal c aster Kits Casters can be used on pedestals in limited applications. They are attached to the die-cast legs of steel Pedestals. Four dual-wheel casters replace furnished levelers. Bulletin: c 1, Dec1 Catalog Number Description Number of Casters Height (in.) Height (mm) Wheel Dia. (in.) Wheel Dia. (mm) Load Rating Ea. (lb.) Load Rating Ea. (kg) AC4M6SV Casters, swivel type with brakes 2 3.72 94 3.00 76 210 95 AC4M6ST Casters, stationary type 2 3.72 94 3.00 76 210 95 Two sets of AC4M6SV and AC4M6ST casters are required. Height columns show height of caster when installed. stainless s teel legs Legs mount to the bottom of a solid base to elevate the enclosure 4 in. (100 mm) from the floor. The legs are made of Type 304 stainless steel and are appropriate for hose-down applications. Mounting hardware is included. note: These legs will not fit on the PROLINE G2 Fully-Sealed Plinth Base. Bulletin: p 20S Catalog Number Description PLEGSS (4) Stainless Steel Legs