AP2012SEC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

2.0mmx1.25mm SMT LED,1.1mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT.

SPEC NO: DSAD0937 REV NO: V.3 DATE: MAR/11/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WAGN ERP:12 03000159 Selection Guid e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T A =25 °C Absolute Maximum Ratings at T A =25 °C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2θθθθ1/2 AP2012SEC SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR 70 200 120 ° Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Super Bright Orange 610 nm IF=20mA λD Dominant Wavelength Super Bright Orange 601 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 30 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Orange 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR = 5V Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C

SPEC NO: DSAD0937 REV NO: V.3 DATE: MAR/11/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WAGN ERP:12 03000159 Super Bright Orange AP2012SEC

SPEC NO: DSAD0937 REV NO: V.3 DATE: MAR/11/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WAGN ERP:12 03000159 AP2012SEC Recommended Soldering Pattern (Units : mm ) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/ -1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/ -15% (Test condition is based on the sorting standard). 3.Forward voltage: +/ -0.1V (Test condition is based on the sorting standard). Tape Specifications (Units : mm )