ACL-AP101 OHMITE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
AP101 100W TO-247 High Power Resistors
- 100 watts at 25°C case temperature heat sink mounted
- TO- 247 style power package
- Sin gle screw mounting to heat sink
- Mou lded case for protection
- Elec trically isolated case
- Non -Inductive design
- RoHS Compliant Characteristics Tolerance (Code): Operating temperature: Temperature co Operating voltage: Dielectric strength: Insulation resistance: Maximum torque: Free air: Load Life Solderability Momentary Overload Moisture resistance Thermal Shock Terminal Strength Vibration, High Frequency -65°C to +175°C ± 50ppm/°C to ± 300ppm/°C (re to ohmic values), referenced to 25°C, ∆R taken at +105°C 700V max 1800Vac 60 seconds, ∆R±0.15% 10G min 0.9 Nm 25°C, rated at 3.5W ∆R±1.0%, Rated power, 2,000 hours 90% min. coverage, 245±5°C for 3 seconds ∆R±0.5%,1.5 times rated power and V (dc) ≤ 1.5VMax. for 5 seconds ∆R±0.5%, -10°C - +65°C, RH>90%, cycle 240 hours ∆R±0.5%, -65°C - 150°C, 100 cycles ∆R±0.2%, (Pull Test) 2.4N ∆R±0.4%, 20g peak ations Value Range Tolerance Pref. Value Range TCR (ppm/˚C) R05 - 1R ± 1% (F) E12, E24, E96 ± 5% (J) E12, E24 ± 10% (K) E12 > 1R - 3R ± 300ppm/°C > 3R - 10R ± 100ppm/°C (std.), ± 200ppm/°C > 10R - 10K ±50ppm/°C, ±100ppm/°C (st d.), ± 200ppm/°C Derating Curve The case temperature measurement must be made with a thermocouple contacting the centre of the component mounted on the designed heat sink Thermal grease should be applied properly 100 0 25 50 75 100 125 150 175 Power Rated % Case Temperature (°C) www.arcolresistors.com For more information and ordering, please consult
The information contained herein does not form part of a contract and is subject to change without notice. Arcol operate a policy of continual product development, therefore, speci/f_ications may change. It is the responsibility of the customer to ensure that the component selected from our range is suitable for the intended application. If in doubt please ask Arcol. ARCOL UK Limited, Threemilestone Ind. Estate, Truro, Cornwall, TR4 9LG, UK. T +4 4 (0) 1872 277431 F +4 4 (0) 1872 222002 E s ales @arcolresistors.com www.arcolresistors.com 3/12.10 AP101 100W TO-247 High Power Resistors Dimensions (mm) 15.49 - 16.01 3.53 - 3.73 3.45 - 3.81 9.90 - 10.42 1.42 - 1.62 4.69 - 5.21 0.55 - 1.07 2.15 - 2.67 5.07 - 5.59 20.44 - 20.96 2.03 - 3.55 13.21 - 15.75 Standard part numbers AP101R05J AP101R1J AP101R2J AP101R5J AP1011RJ AP1011R2J AP1011R5J AP1011R8J AP1012R2J AP1012R7J AP1013RJ AP1013R3J AP1013R9J AP1014R3J AP1014R7J AP1015R6J AP1016R2J AP1016R8J AP1017R5J AP1018R2J AP10110RJ AP10112RJ AP10115RJ AP10118RJ AP10122RJ AP10124RJ AP10127RJ AP10130RJ AP10133RJ AP10139RJ AP10147RJ AP10151RJ AP10156RJ AP10162RJ AP10168RJ AP10182RJ AP101100RJ AP101120RJ AP101150RJ AP101180RJ AP101200RJ AP101220RJ AP101270RJ AP101330RJ AP101390RJ AP101470RJ AP101560RJ AP101620RJ AP101680RJ AP101820RJ AP1011KJ AP1011K2J AP1011K5J AP1011K8J AP1012KJ AP1012K2J AP1012K7J AP1013KJ AP1013K3J AP8213K6J AP1013K9J AP1014K3J AP1014K7J AP1015K6J AP1016K8J AP1018K2J AP1017K5J AP10110KJ A P101 10 K J V Series Resistance Tolerance F = 1% J = 5% K = 10% TCR N = 50ppm L = 200ppm Blank = standard