ANX7434 ANALOGIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
Built-in re-timer − Integrated re-timer for USB 3.2 up to Gen 2 @ 2x10Gbps for a combined 20G data throughput − Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-E) − Supports both host (source) and device (sink) applications in USB-C subsystems − Loss compensation to recover up to 23dB channel loss TCPC-compliant hardware interface Supports DFP and UFP USB-C applications Dedicated control signals for VBUS Source FET Integrated Reference CLK Serial and debug interfaces − I2C Slave interface, up to 1MHz, for mux and re- timer configuration Industry standard compatibility − USB 3.2 specification, Appendix E − USB Type-C r1.2 specification − Intel USB 3.2 Repeater and Active Switch specification Low-power design − Analog power supply at 1.8V − I/O power supply at 1.8V − Core power supply at 1.2V Package − QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch Commercial temperature range of 0C to 70C
Applications
Notebooks, desktops, gaming PCs, workstations, servers, 2-in-1 PCs U S B C C O N N ANX7434 OpMode/I2C I2C Slave Cable Det. & Orientation VCONN FETs VBUS SENSE & OCP CC1/VCONN CC2/VCONN VBus PMIC SS_TRx1 SS_TRx2SS B Rx SS_TRx1 SS B Tx SS_TRx2 Re-Timer State Machines PWR Distribution Internal CLK SS A Rx SS A Tx
Related Products
ANX7433 USB 3.2 Gen2x2 (20G) Active USB-C Re-timer ANX7431 USB3.2 (10G) 1x2 Active Switch USB-C Re-timer ANX7443 10G Active Mux (6x4) with Integrated Re-timers for USB3.2/DisplayPort ANX7451 10G Active Mux (4x4) with Integrated Re-timers for USB3.2/DisplayPort ANX7491 10G USB 3.2 Re-timer (1-Port) ANX7497 DisplayPort 4-lane Re-timer Copyright ©2019 Analogix Semiconductor, Inc. 3211 Scott Blvd., Suite 100 Santa Clara, CA 95054, USA +1 (408) 988-8848 http://www.analogix.com/ ©2019 Analogix Semiconductor, Inc. All Rights reserved. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT ANY EXPRESS REPRESENTATIONS OF WARRANTIES. IN ADDITION, ANALOGIX SEMICONDUCTOR INC. DISCLAIMS ALL IMPLIED REPRESENTATIONS AND WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTURAL PROPERTY RIGHTS. This document contains proprietary information of Analogix Semiconductor, Inc. or under license from third parties. No part of this document may be reproduced in any form or by any means or transferred to any third party without the prior written consent of Analogix Semiconductor, Inc. The information contained in this document is not designed or intended for use in on-line control of aircraft, aircraft navigation or aircraft communications; or in the design, construction, operation or maintenance of any nuclear facility. Analogix disclaims any express or implied warranty of fitness for such uses. Analogix Semiconductor, Inc., the Analogix Logo, and WideEye™ SerDes, CoolHD™, and SlimPort® are trademarks of Analogix Semiconductor, Inc., in the United States and other countries. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. DisplayPort and the DisplayPort logo are trademarks or registered trademarks of the Video Electronics Standards Association, VESA®. USB and the USB logo are trademarks or registered trademarks of USB Implementers Forum, Inc., creators of USB technology. All other trademarks and registered trademarks are the property of their respective owners.