ANX7431 ANALOGIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
. Preliminary ‘ay analogix ANX7431 : Pr Brief Bring Vision to Life rales ii 10G Active Mux (1x2) with Integrated Re-timer for USB 3.2 ANX7431 is a USB3.2 Gen2 10G active mux with integrated re-timer capable of recovering the USB signals with loss compensation of up to 23dB. ANX7431 also integrates a mux (1x2) for USB Type-C™ (USB-C™) applications. ANX7431 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) and device (sink) USB-C data-only applications are fully supported by ANX7431 with built-in intelligent switching. With the intelligent digital switching, ANX7431 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector. Features * — Industry standard compatibility © Built-in re-timer — USB 3.2 specification, Appendix E Int ted re-ti for USB 3.2 up to Gen? @ 10Gb — USB Type-C r1.2 specification ~_ Integrated re-timer for USB 3.2 up to Gen Ps — Intel USB 3.2 Repeater and Active Switch specification — Supports both Separate Reference Clock Independent : SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of * Low-power design USB 3.2 Specification (Appendix-E) — Analog power supply at 1.8V — Supports both host (source) and device (sink) — 1/0 power supply at 1.8V applications in USB-C subsystems — Core power supply at 1.2V — Loss compensation to recover up to 23dB channel loss * Package Integrated mux = QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm — Digital (1x2) mux switches USB signals and preserves pin-pitch enhanced signal output over USB-C connector * Commercial temperature range of OC to 70C — Mux control input through I2C commands from external I2C master (or, optionally through Application FLIP/USB_EN pins) plications . . Notebooks, desktops, workstations, servers, docking * — Integrated Reference CLK * — Serial and debug interfaces — PCSlave interface, up to 1MHz, for mux and re-timer configuration 2 u + 55 Ri i a — 5
Related Products
ANX7433 10G Active Mux (1x2) with Integrated Re-timer and CC Detection for USB 3.2 ANX7443 10G Active Mux (6x4) with Integrated Re-timers for USB3.2/DisplayPort ANX7451. 10G Active Mux (4x4) with Integrated Re-timers for USB3.2/DisplayPort ANX7491. 10G USB 3.2 Re-timer (1-Port) ANX7497 DisplayPort 4-lane Re-timer Copyright ©2018 Analogix Semiconductor, Inc. 3211 Scott Blvd., Suite 100 Santa Clara, CA 95054, USA +1 (408) 988-8848 http://www.analogix.com/ ©2018 Analogix Semiconductor, Inc. All Rights reserved. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT ANY EXPRESS REPRESENTATIONS OF WARRANTIES. IN ADDITION, ANALOGIX SEMICONDUCTOR INC. DISCLAIMS ALL IIMPLIED REPRESENTATIONS AND WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTURAL PROPERTY RIGHTS. This document contains proprietary information of Analogix Semiconductor, inc. or under license from third parties. No part of this document may be reproduced in any form or by any means or transferred to any third party without the prior written consent of Analogix Semiconductor, Inc.