ANT21

ANT11 CIT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

www.citswitch.com page 115 phone – 763.535.2339 fax – 763.535.2194

• Wide variety of applications from consumer electronics to commercial
• Standard epoxy sealed terminations
• Gold contacts available for low power applications
• Available support brackets for greater stability
• Up to four poles with seven functions available
• Anti-rotation feature on flat toggles
• High torque bushing prevents separation from frame during installation
• Wide variety of terminal options SPECIFICATIONS Electrical Ratings 5A @ 120VAC, 28VDC; 2A @ 250VAC See Contact Options Electrical Life 50,000 cycles typical Contact Resistance < 20 mΩ max initial @ 2-4VDC, 100mA Dielectric Strength 1500Vrms min Insulation Resistance > 100MΩ min Operating Temperature Storage Temperature -40°C to 85°C -40°C to 85°C MATERIALS ←RoHS COMPLIANT Actuator Brass, Chrome Plated Housing DAP – Diallyl Phthalate Cover Stainless Steel Bushing Brass, Nickel Plated Bracket Brass, Tin Plated Contacts Phosphor Bronze, Silver Plated Terminals Brass, Silver Plated ANT - E222871

www.citswitch.com page 116 phone – 763.535.2339 fax – 763.535.2194 TOGGLE SWITCH ORDERING INFORMATION Series: ANT ANT Number of Poles: 1 = SPDT 2 = DPDT 3 = 3PDT 4 = 4PDT Switch Function: 1 = ON-NONE-ON 2 = ON-NONE-(ON) 3 = ON-OFF-ON 4 = (ON)-OFF-(ON) 5 = ON-OFF-(ON) 6 = ON-ON-ON See Three Way Wiring Section for Details T Actuator: T = 5.08mm, Std S = 10.41mm, Std X = 13.97mm, Std V = 16.26mm, Std W = 21.34mm, Std Y = 6.35mm, Flat Toggle only available with AR1/AR2/AN1/AN2 bushings F = 12.30mm, Flat Toggle only available with AR1/AR2/AN1/AN2 bushings G = 21.00mm, Flat Toggle only available with AR1/AR2/AN1/AN2 bushings K = 13.50mm, Flat Toggle only available with AR1/AR2/AN1/AN2 bushings Z = 12.37mm, Large Toggle only available with BZ/BZR bushings Z1 = 17.45mm, Large Toggle only available with BZ/BZR bushings LK = 14.73mm, Locking Toggle, Round Top only available with K/K1 bushings LK1 = 14.73mm, Locking Toggle, Flat Top only available with K/K1 bushings P(color) = 21.34mm, Plastic See color choices in Actuator Option section PX = 26.30mm, Plastic, Flat Toggle only available with BZ/BZR bushings M Bushing: E / E1 = 8.89mm, ¼-40NS / Non-Threaded, Keyway F / F1 = 7.10mm, ¼-40NS / Non-Threaded, Keyway J = 8.89mm, ¼-40NS, Flat W = 8.89mm, M6P-0.75 (Metric), Keyway H = 8.00mm, High Torque, ¼-40NS, Keyway G = 7.52mm, High Torque, ¼-40NS, Flat AR1 / AR2 = 7.55mm, Anti-Rotation, ¼-40NS / Non-Threaded, Keyway AN1 / AN2 = 7.55mm, Anti-Rotation, ¼-40NS / Non-Threaded, Flat BZ = 11.38mm, 15/32 -32NS, Keyway BZR = 11.38mm, 15/32 -32NS, Keyway, with support insert L = 7.55mm, ¼-40NS, Flat, Splash proof K / K1 = 8.00mm, ¼-40NS / Non-Threaded, Keyway See Actuator Option section for bushing availability with various actuators B Terminals: B = Solder Lug, C = PC Pin Wire wrap terminals available in various lengths, contact factory D = Quick Connect H = Horizontal Mount, Right Angle PC Pin; HS = Snap-in V = Vertical Mount, Right Angle PC Pin; VS = Snap-in S20 or S25 = PC Pin with Support Bracket; V20 or V25= Snap-in Support Bracket S35 or S40 = PC Pin with Support Bracket; V35 or V40 = Snap-in Support Bracket Q Contacts: Q = Silver Plated R = Gold Plated G = Gold over Silver Plated E Epoxy Seal: E = Epoxy Seal Actuator Cover: Blank = No Cover S = for S, T, X, V, & W actuators E = for E, F, J, & G bushings Z = for BZ & BZR bushings Actuator Cover Colors: 1 = White 2 = Black 3 = Red Color choices only available with S toggle cover ANT

www.citswitch.com page 117 phone – 763.535.2339 fax – 763.535.2194 SWITCH FUNCTION ANT Toggle Position Function

1 ON NONE ON

2 ON NONE (ON)

3 ON OFF ON

SPDT 4 (ON) OFF (ON)

5 ON OFF (ON)

4 (ON) OFF (ON)

6 ON ON ON

3PDT 4 (ON) OFF (ON) --- 2-1 5-4 8-7 Toggle Position Function 4 (ON) OFF (ON) --- 2-1 5-4 8-7 11-10

www.citswitch.com page 118 phone – 763.535.2339 fax – 763.535.2194 ACTUATOR OPTIONS Actuator lengths shown with E bushing, subtract 1.78mm for F/F1 bushing, subtract 0.51mm for M bushing T S X V W Only available with AR1/AR2 & AN1/AN2 bushings. Y F G K Only available with BZ & BZR bushings. Z Z1 PX PX actuator is plastic (Black) LK & LK1 only available with K & K1 bushings. LK & LK1 are not available with momentary functions ** P actuator is plastic P2 = Black, std P1 = White P3 = Red Contact factory for other color options LK LK1 P2 ANT

www.citswitch.com page 119 phone – 763.535.2339 fax – 763.535.2194 BUSHING OPTIONS E (Threaded) E1 (Non- Threaded) F (Threaded) F1 (Non- Threaded) J (Threaded) H (Threaded) High Torque G (Threaded) High Torque W (Threaded) Metric AR1 (Threaded) AR2 (Non-Threaded) Anti-Rotation AN1 (Threaded) AN2 (Non-Threaded) Anti-Rotation BZ (Threaded) BZR (Threaded) Impact Resistant K (Threaded) K1 (Non-Threaded) If selecting F, G, or K actuator, one of these bushings must be selected Only used with Z, Z1, & PX actuators Only used with LK & LK1 actuators PANEL MOUNTING 1/4”- 40 Bushings Metric Bushing 15/32” Bushings L (Threaded) Splash Proof Not available with Z, Z1, & PX actuators ANT

www.citswitch.com page 120 phone – 763.535.2339 fax – 763.535.2194 TERMINAL OPTIONS B (Single Pole) B (Double Pole) B (3 Pole) B (4 Pole) C (Single Pole) C (Double Pole) C (3 Pole) C (4 Pole) D (Single Pole) D (Double Pole) D (3 Pole) D (4 Pole) H (HS – Snap-in) = Horizontal Mount, Right Angle PC Pins (Single Pole) H (HS – Snap-in) = Horizontal Mount, Right Angle PC Pins (Double Pole) ANT

www.citswitch.com page 121 phone – 763.535.2339 fax – 763.535.2194 TERMINAL OPTIONS V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Single Pole) V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Double Pole) V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Three Pole) V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Four Pole) ANT

www.citswitch.com page 122 phone – 763.535.2339 fax – 763.535.2194 TERMINAL OPTIONS Terminal Option “A” Dimension S20-V20 11.68 S25-V25 16.00 S20/S25 (V20/V25 – Snap-in Bracket) = PC Pins with Support Bracket (Single Pole) Terminal Option “A” Dimension S20-V20 11.68 S25-V25 16.00 S20/S25 (V20/V25 – Snap-in Bracket) = PC Pins with Support Bracket (Double Pole) Terminal Option “A” Dimension S20-V20 11.68 S25-V25 16.00 S20/S25 (V20/V25 – Snap-in Bracket) = PC Pins with Support Bracket (Three Pole) ANT

www.citswitch.com page 123 phone – 763.535.2339 fax – 763.535.2194 ANT TERMINAL OPTIONS Terminal Option “A” Dimension S20-V20 11.68 S25-V25 16.00 S20/S25 (V20/V25 – Snap-in Bracket) = PC Pins with Support Bracket (Four Pole) Terminal Option “A” Dimension S35-V35 11.68 S40-V40 16.00 S40 (V40 – Snap-in Bracket) = PC Pins with Support Bracket (Single Pole) Terminal Option “A” Dimension S35-V35 11.68 S40-V40 16.00 S40 (V40 – Snap-in Bracket) = PC Pins with Support Bracket (Double Pole)

www.citswitch.com page 124 phone – 763.535.2339 fax – 763.535.2194 ANT TERMINAL OPTIONS Terminal Option “A” Dimension S35-V35 11.68 S40-V40 16.00 S40 (V40 – Snap-in Bracket) = PC Pins with Support Bracket (Three Pole) Terminal Option “A” Dimension S35-V35 11.68 S40-V40 16.00 S40 (V40 – Snap-in Bracket) = PC Pins with Support Bracket (Four Pole) CONTACT OPTIONS Designator Contact Material Termi nal Material Electrical Ratings Q Silver Plating Silver Plati ng 5A @ 120VAC, 28VDC; 2A @ 250VAC R Gold over Nickel Plating Gold over Ni ckel Plating .4 VA max @ 20VAC or VDC max G Gold over Silver Plating Gold over Silv er Plating .4 VA max @ 20VAC or VDC max or 5A @ 120VAC, 28VDC; 2A @ 250VAC CAP OPTIONS RUBBER TOGGLE COVER SEALED BOOT E SEALED BOOT Z For use with S, T, X, V, & W actuators 1 = White, 2 = Black, 3 = Red For use with E, F, J, & G bushings only. Black color standard. ** For use with BZ & BZR bushings only. Black color standard.

www.citswitch.com page 125 phone – 763.535.2339 fax – 763.535.2194 THREE WAY WIRING DIAGRAM POSITION 1 POSITION 2 POSITION 3 POSITION 1 POSITION 2 POSITION 3 HARDWARE Two hex nuts, one lock washer, & one locking ring supplied standard with threaded bushings Hex Nut Lock Washer Locking Ring Dress Nut Knurled Nut Knurled Nut For use with E, F, M, AR1, L, & K bushings Hex Nut Lock Washer Locking Ring Dress Nut Knurled Nut Knurled Nut For use with J, G, & AN1 bushings Hex Nut Lock Washer Locking Ring For use with BZ & BZR bushings ANT