C13412 LEDIL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Product Number C13412_ANNA-40-7-W Family Anna Type Lens array Color clear Diameter 40 mm Height 11,99 mm Style round Optic Material PMMA Holder Material Fastening pin Status production ready ROHS Compliant Yes Date Updated 31/10/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector ML-E sim: 49 Wide sim: 88 %sim: 1.191 - NF2x757A 44 deg Wide 90 % 1.700 - 107 sim: 46 Wide sim: 86 %sim: 1.363 - NS9x383 sim: 31 Wide sim: 87 %sim: 1.953 - NS9x153 sim: 52 Wide sim: 89 %sim: 1.252 - January 22nd 2018 7:49 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10

24240 SALO, Finland

http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

B C A D Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L SCALE 1:1 WEIGHT SHEET SIZE DRAWING TITLE PART NUMBER Ledil Oy Salorankatu 10 FIN 24240 SALO Finland THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy." 8,51 g INDEX PART NO DESCRIPTION MATERIAL COLOUR

1 ANNA-40-7-W PMMA

39.9 A A 1.5 10.6

12.8 Isometric view

Scale: 1:1 Section view A-A Scale: 1:1 B Detail B Scale: 5:1 LED (XT-E)

NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.