ANG ZFSWITCHES | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

www.cherryswitches.com Page 1 of 2 Last update 2016-07-12; specifications subject to change without notice. Angle Position Sensors ANG Sensors Thin, programmable, non-contact magnetic position sensors capable of continuous rotation, with dual outputs available.

Description

The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent (redundant) outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft. Actuator magnet part number AS500106 is required to assure proper operation (ordered separately). Features Typical Applications  Angular position sensor with high tolerance for misalignment  Non-contact angular position sensing and full 360O rotation  Custom programming available for: angle range, slope, PWM output – contact factory  No mechanical interface means no parts to wear out or jam  Comes with 20 AWG 305 mm (12”) discrete wire leads  RoHS Compliant  IP68*  Maximum air gap of 6 mm (0.24”)  Compliant to industrial/automotive EMC/EMI/ESD directives  Hydraulic valves  Hydraulic controls  Electric drives  Pneumatic controls  Zero-contact encoder alternative  Gear selection / shifting position  Lifting / ride height position  Throttle / pedal position  Steering wheel position Environmental Specifications Operating Temperature -40 ⁰C to 140 ⁰C (-40 ⁰F to 284 ⁰F) Ingress Protection IP68* **Contact ZF for details on testing conditions Electrical Specifications Input Supply Voltage Maximum Overvoltage Reverse Battery Protection

5.0 VDC ± 10% 16 VDC 12 VDC

Output Signal 0.5 – 4.5 VDC (with 5 VDC input) Input Current Single output 8 mA typ., 10 mA max. Dual output 16 mA typ., 20 mA max. Resolution 12 bit Accuracy, overall Programmed angle sensing range 35⁰ < 65⁰ : ± 2.5% Full scale Programmed angle sensing range: 65⁰ < 360⁰ : ± 2.0% Full scale Output Linearity Programmed angle sensing range 35⁰ < 65⁰ : ± 2.5% Full scale Programmed angle sensing range: 65⁰ < 360⁰ : ± 1.0% Full scale Mechanical Specifications Measuring Range 0⁰ to 360⁰, customizable (see graph) Air Gap 1 mm to 6 mm (application dependent); 2.5 mm typ. Eccentricity ± 2 mm (0.08”)

www.cherryswitches.com Page 2 of 2 Last update 2016-07-12; specifications subject to change without notice. Typical Output vs. Angular Rotation (as percentage of input) Dimensions mm (inches) Products Part Number Output Interface ANG-11HAW1 Analog single 20 AWG x 305 mm (12") discrete wires ANG-21HAW1 Analog dual 20 AWG x 305 mm (12") discrete wires