ANDPSI121GAOS-HB PURDY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • High Luminance
  • Built-in Long Life Lamps (MTTF: 50,000 h)
  • Replaceable structure of lamp units
  • Analog scaling board attachable to LCD backward
  • Recommendable inverter attachable to LCD backward
  • XGA (1024 x 768 pixels color display)
  • Reverse Scan function
  • Applications: electronic books and personal digital-picture viewers Mechanical Characteristics Item Specification Unit Outline Dimensions 278.3 (H) x 209.0 (V) x 12.0 max (D) mm Number of Pixels 1024 (H) x 768 (V) pixels Active Area 245.8 (H) x 184.3 (V) mm Viewing Area 247.8 (H) x 186.3 (V) Pixel Pitch 0.24 (H) x 0.24 (V) mm Weight (approx.) 685 gram Backlight Twin CCFL, Sidelight type – Absolute Maximum Ratings Item Symbol Min. Max. Unit Supply Voltage V DD -0.3 4.0 V V FL 0 2.0 kV(rms) FL Driving Frequency f FL (0) (100) kHz Input Signal Voltage V IN -0.3 V DD 0.3 V Operating Ambient Temp. T op 05 0 ° C Operating Temp. for Panel 0 60 °C Storage Temperature T stg -20 60 °C Storage Humidity (Max. Wet bulb temp = 39°C) – 10 90 %(RH) *: 8 color bars pattern **: Except the efficiency of FL inverter Electrical Characteristics (Ta = 25°C) Item Symbol Min. Typ. Max. Unit Supply Voltage I FL =6.0mA(rms) V DD 3.0 3.3 3.6 V V FL TBD (580) TBD V(rms) FL Start Voltage (Ta = 0°C) – 1400 – – V(rms) Differential Input Voltage V ID 100 _ 600 mV Common Mode Input Voltage V CM 1.0 – 2.4- ID )/2 V Current Consumption I DD * – (220) TBD mA I FL ** 3.0 – 6.0 mA(rms) Pwr Consumption I FL =6.0mA(rms) P – (7.7) – W Optical Characteristics (Ta = 25°C) Item Sym. Min. Typ. Max. Unit Contrast Ratio CR 100 250 – – Viewing Angle (CR ≥ 10) (Upper+Lower) TBD 100 – (Left+Right) TBD 120 – Response Time ON on – – 50 ms OFF t off – – 50 ms Luminance I FL =6.0mA(rms) L (280) (350) – cd/m Lamp Life Time (Notes 1,2) MTBF 50,000 h Note 1: Conditions: Ta = 25°C, I FL =6.0mA(rms), continuous lighting Note 2: Definitions of failure: a) LCD luminance becomes half of the minimum value. b) Lamp doesn’t light normally. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8216 • Fax: 408.733.1287 • sales@purdyelectronics.com 7/27/07 www.purdyelectronics.com Displays Dimensional Outline Front View Unit: mm Standard Tolerance: 0.5mm ANDpSi121GA0S-HB-KIT

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 7/27/07 Tel: 408.523.8216 • Fax: 408.733.1287 • sales@purdyelectronics.com www.purdyelectronics.com Displays Notes: Refer to “Timing Chart” below. If DE is fixed to “H” or “L ” level for certain period while NCLK is supplied, the panel displays black w/some flicker. If NCLK is fixed to “H” or “L ” level for certain period while DE is supplied, the panel may be damaged. Please adjust LCD operating signal timing and FL driving frequency, to optimize the display quality. There is a possibility that flicker is observed by the interference of LCD operating signal timing and FL driving condition (especially driving frequency), even if the condition satisfies above timing specifications and recommended operating condi- tions. Do not make t v t vhd and t vds fluctuate. If t t vhd, and t vds are fluctuate, the panel display black. In case of using the long frame period, the deterioration of display quality, noise, etc. may be occurred. NCLK count of each Horizontal Scanning Time should be always the same. V-Blanking period should be ‘n’ X “Horizontal Scanning Time”. (n:integer) Frame period should be always the same. Timing Chart Timing Specifications (see Notes below) Item Symbol Min Typ Max Unit Horizontal Scanning Term t h 1334 x t c 1344 x t c – clock H-sync Pulse Width t hw 4 x t c 136 x t c – clock Horizontal Front Porch t hfp 4 x t c 24 x t c – clock Horizontal Back Porch t hbp 24 x t c 160 x t c – clock Horizontal Data Sync Period t hds 32 x t c 296 x t c – clock Horizontal Display Term t hd 1024 x t c 1024 x t c 1024 x t cc l o c k Frame Period t v 778 x t h 806 x t h 860 x t h line V-sync Pulse Width t vw 2 x t h6 x t h – line V-sync Set up Time (to H-sync) t vsu 8 x t c– – c l o c k V-sync Hold Time t vhd (thbp+16) x t c– – c l o c k Vertical Front Porch t vfp 1 x t h3 x t h – line Vertical Back Porch t vbp 2 x t h 29 x t h – line Vertical Data Sync Period t vds 8 x t h 35 x t h – line Vertical Display Time t vd 768 x t h 768 x t h 768 x t h line Clock Period t c 15.0 15.38 – ns tv tvw VSYNC tvsu tvhd th HSYNC tvp tvbp tvd tvds DE 1023 1024 12 th thw HSYNC thbp thfp thds thd DE 1024 pixel CLK 2341 ANDpSi121GA0S-HB-KIT

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8216 • Fax: 408.733.1287 • sales@purdyelectronics.com 7/27/07 www.purdyelectronics.com Displays Recommended Inverter: Block Diagram Connector Pin Assignment for Interface CN1 Input Signal (see Notes below) DF19L-20P-1H / Hirose Electric Co., Ltd. Terminal No. Symbol Function 1 V DD Power Supply: +3.3V 2 V DD Power Supply: +3.3V 3 V SS Ground 4 V SS Ground 5 RxIN0- Neg. LVDS differential data input (R0-R5, G0) 6 RxIN0+ Pos. LVDS differential data input (R0-R5, G0) 7 V SS Ground

8 RxIN1-

Neg. LVDS differential data input (G1-G5, B0-B1)

9 RxIN1+

Pos. LVDS differential data input (G1-G5, B0-B1) 10 V SS Ground

11 RxIN2-

Neg. LVDS differential data input (B1-B5,HS,VS,DE)

12 RxIN2+

Pos. LVDS differential data input (B1-B5,HS,VS,DE) 13 V SS Ground

14 CLK- Clock Signal (-)

15 CLK+ Clock Signal (+)

17 U/D

Vert. Rev. (“L ” level or Open; Normal, “H” level: Rev.)

18 L/R

Horiz. Rev. (“L ” level or Open; Normal, “H” level: Rev.) 19 V SS Ground 20 V SS Ground CN2 CCFL Power Source BHR-04VS-1/Japan Solderless Terminal Mfg. Co., Ltd Terminal No. Symbol Function

1 VFLH1 CCFL Power Supply (High Voltage)

2 VFLH2 CCFL Power Supply (Low Voltage)

3 NC Non Connection (open)

4 VFLL CCFL Power Supply (Low Voltage)

1) Drivers are fabricated on the LCD glass 2) Connectors CN1: DF19L-20P-1H / Hirose Electric Co., Ltd. Mating Connector - DF19G-20S-1F (FPC) / CN2: BHR-04VS-1/Japan Solderless Terminal Mfg. Co., Ltd. Mating Connector - SM04(4.0)B-BHS-1 / JST Notes: Please connect GND pin to ground. Don’t use it as no-connect nor connection with high impedance. NC terminal should be open. Take away terminal No. 3 of the mating connector. If does not take away, it may cause smoke burn of electrical parts by high voltage. DF19G-20S-1C (Cable) ANDpSi121GA0S-HB-KIT

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 www.purdyelectronics.com Displays Note (2): 256K colors are displayed by the combinations of 18 data bits. Display R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Gray Scale Level Basic Color B l a c kLLLLLLLLLLLLLLLLLL – B l u eLLLLLLLLLLLL HHHHHH – Green LLLLLL HHHHHH LLLLLL – L t . B l u e LLLLLL HHHHHHHHHHHH – R e d HHHHHH LLLLLLLLLLLL – P u r p l e HHHHHH LLLLLL HHHHHH – Y e l l o w HHHHHHHHHHHH LLLLLL – W h i t eHHHHHHHHHHHHHHHHH – Gray Scale of Red B l a c kLLLLLLLLLLLLLLLLLL L 0 D a r kLLLLLHLLLLLLLLLLLL L 1 LLLLHLLLLLLLLLLLLL L 2 ::: L3~L60 ::: H H H HLHLLLLLLLLLLLL L 6 1 L i g h tHHHHH LLLLLLLLLLLLL L 6 2 R e d HHHHHH LLLLLLLLLLLLR e d L 6 3 Gray Scale of Green B l a c kLLLLLLLLLLLLLLLLLL L 0 D a r kLLLLLLLLLLLHLLLLLL L 1 LLLLLLLLLLHLLLLLLL L 2 ::: L3~L60 ::: LLLLLL H H H HLHLLLLLL L 6 1 L i g h tLLLLLL HHHHH LLLLLLL L 6 2 Green LLLLLL HHHHHH LLLLLL G r e e n L 6 3 Gray Scale of Blue B l a c kLLLLLLLLLLLLLLLLLL L 0 D a r kLLLLLLLLLLLLLLLLLH L 1 LLLLLLLLLLLLLLLLHL L 2 ::: L3~L60 ::: LLLLLLLLLLLL HHHHLH L 6 1 L i g h tLLLLLLLLLLLL HHHHHL L 6 2 B l u eLLLLLLLLLLLL HHHHHHB l u e L 6 3 Gray Scale of White Black B l a c kLLLLLLLLLLLLLLLLLL L 0 D a r kLLLLLHLLLLLHLLLLLH L 1 LLLLHLLLLLHLLLLLHL L 2 ::: L3~L60 ::: HHHHLHHHHHLHHHHHLH L 6 1 L i g h tHHHHHLHHHHHLHHHHHL L 6 2 W h i t eHHHHHHHHHHHHHHHHHH W h i t e L 6 3 ANDpSi121GA0S-HB-KIT