AND064VT4N1-4HB PURDY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • High aperture ratio • Single 5V input for LCD
  • Sunlight readable • Dual CCFL backlight unit
  • High contrast ratio • High image quality RoHS compliant
  • Active/outline area=62.3%
  • Image Reversion: Up/Down & Left/Right
  • Backlight lamps are replaceable
  • Compatible w/VGA-480, VGA-400, VGA-350 & free format Mechanical Characteristics Absolute Maximum Rating Electrical Specification Item Specification Unit Screen Size 6.4 inch (17 cm) diagonal inch Outline Dimensions 175.0 (H) x 126.5 (V) x 12.5 (D) mm Active Area 129.60 (H) x 97.44 (V) mm Input Signal 6-bit Digital Pixel No. (RGB trio) 640 (H) x 480 (V) dot Dot Pitch 0.0675 (H) x 0.203 (V) mm Pixel Configurationt Stripe – Pixel Pitch 0.203 (H) x 0.203 (V) mm Weight 340±10 g Item Symbol Conditions Absolute Max. Rating Unit Min. Max. +5V SupplyVoltage V CC Ta-25°C -0.3 7.0 V Input Signals Voltage Vsig Ta-25°C -0.3 V CC +0.3 V Operating Temperature Top – -20 +70 °C Storage Temperature Tstg – -30 +70 °C Humidity (No condensation of water) – ≤40°C – 95% RH Item Symbol Conditions Specifications UnitsMin. Typ. Max. Supply Voltage V CC Ta=25°C 4.75 5.0 5.25 V Current Dissipation I CC Ta=25°C – 500 600 mA Supply Input Ripple Voltage V CCRP Ta=25°C – – 0.1 Vp-p Input Signals Voltage (High) V IH Ta=25°C 2.6 – – V Input Signals Voltage (Low) V IL Ta=25°C – – 0.5 V Tube Current I E Ta=25°C – 6 – mA Tube Voltage V L Ta=25°C – 380 – V RMS Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
  • RoHS Compliant

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com 5/6/08 www.purdyelectronics.com Displays Power Consumption Optical Specification Parameters Symbol Specifications Unit RemarkTyp. Max. +5V Current Dissipation I CC 100 120 mA – Input Signals Current (High) I IH – 100 µA V IH =+5 Input Signals Current (Low) I IL – 100 µA V IL =0V LCD Panel Power Consumption – 0.5 0.6 W – Backlight Power Consumption – 4.32 – W 380 V RMS Item Symbol Conditions Specifications UnitMin. Typ. Max. Luminance LUM 750 800 850 cd/m Contrast Ratio CR At optimized Viewing angle 300 500 – – Viewing Angle Horizontal θ 21, θ CR>10 60 – degVertical θ 12 35 40 – θ 11 50 55 – Lamp Life +25°C Time – 50,000 – hr Interface Pin Assignment CN1 Input Signal (DF9A-31P-1V) Pin No. Symbol Function Pin No. Symbol Function

1 GND Ground (0V) 17 G4 Green Image data signal

2 CLK Clock sig. for sampling image digital data 18 G5 Green Image data signal (MSB)

3 Hsync Horizontal synchronous signal 19 GND Ground (0V)

4 Vsync Vertical synchronous signal 20 B0 Blue Image data signal (LSB)

5 GND Ground (0V) 21 B1 Blue Image data signal

6 R0 Red Image data signal (LSB) 22 B2 Blue Image data signal

7 R1 Red Image data signal 23 B3 Blue Image data signal

8 R2 Red Image data signal 24 B4 Blue Image data signal

9 R3 Red Image data signal 25 B5 Blue Image data signal (MSB)

10 R4 Red Image data signal 26 GND Ground (0V)

11 R5 Red Image data signal (MSB) 27 DENB Signal to select horiz. display position 12 GND Ground (0V) 28 VCC DC +5.0V power supply 13 G0 Green Image data signal (LSB) 29 VCC DC +5.0V power supply 14 G1 Green Image data signal 30 R/L Horiz. image shift-direction select signal 15 G2 Green Image data signal 31 U/D Vert. image shift-direction select signal

16 G3 Green Image data signal

CN2 & CN3 CCFL Power Supply Pin No. Symbol Description

1 VL Input (High Voltage)

2 NC No Connect

3 GL Input (Low Voltage)

Note: Use INV-CLIO-12-U-002

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 5/6/08 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com www.purdyelectronics.com Displays Dimensional Outline Note: The TFT-LCD module is compatible with four kinds of VGA timing. They are VGA-480, VGA-400, VGA-350 and freedom mode. The polarization of Hsync and Vsync determine the timing. R/L is the Right/Left shift signal. The default value of the system is High. Input/Output Signal Timing Chart U/D is the Up/Down shift signal. The default value of the system is High. Input/Output Connector (A) LCD module connector Hirose DF9A-31P-1V (B) Backlight connector JST BHR-03VS-1 Pin No.: 3 Pitch: 4 mm Red: High voltage White: Low voltage VGA-480 VGA-400 VGA-350 Freedom Mode Hsync Polarization Negative Negative Positive Positive Vsync Polarization Negative Positive Negative Positive General mechanical tolerance = 0.5mm (1) R/L = High U/D = Low (2) R/L = Low U/D = Low (1) R/L = High U/D = Low (2) R/L = High U/D = High Parameters Symbol Format Min Typ Max Unit Clock Frequency Fc=1/Tc All – 25.175 – MHz High Time Tckh All 10 – – ns Low Time Tckl All 10 – – ns

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com 5/6/08 www.purdyelectronics.com Displays AND064VT5N1-WV HB Block Diagram Hsync Period Hp All – 31.778 – µs – 800 – tc Pulse Width Hpw All 12 96 139 tc Back Porch Hbp All 12 48 139 tc Hpw+Hbp All 136 144 151 tc Vsync Period Vp VGA-480 – 16.8 – ms 515 525 800 Hp VGA-400 – 14.3 – ms 446 449 480 Hp VGA-350 – 14.3 – ms 447 449 510 Hp Pulse Width Vpw All 2 2 35 Hp Back Porch Vbp 480 2 33 35 Hp400 2 35 38 350 2 60 63 Data CLK-DATA Dcd All 10 – – ns DATA-CLK Ddc All 10 – – ns DENB Horizontal Scanning Period T1 All 780 800 900 tc Horizontal Scanning Period T2 All – 640 – tc Vertical Display Period T3 All – 480 – T1 Frame Cycling Period All 515 525 800 T1 Parameters Symbol Format Min Typ Max Unit